lupyuen/local-nuttx-update
1
0
Fork 0
forked from nuttx/nuttx-update
Code Pull requests Activity

Add support for a BOARDIOC_RESET boardctl() command

Browse source
This commit is contained in:
Gregory Nutt 2015-07-04 10:36:47 -06:00
parent 48dee66356
commit 70b6085927
2 changed files with 34 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

24
configs/Kconfig
View file

@ -1328,21 +1328,26 @@ config NSH_MMCSDMINOR
default 0
depends on NSH_LIBRARY && MMCSD
---help---
If board-specific NSH start-up logic needs to mount an MMC/SD device, then the setting should be provided to identify the MMC/SD minor device number (i.e., the N in /dev/mmcsdN). Default 0
If board-specific NSH start-up logic needs to mount an MMC/SD device, then the
setting should be provided to identify the MMC/SD minor device number (i.e., the N ini
/dev/mmcsdN). Default 0
config NSH_MMCSDSLOTNO
int "MMC/SD slot number"
default 0
depends on NSH_LIBRARY && MMCSD
---help---
If board-specific NSH start-up supports more than one MMC/SD slot, then this setting should be provided to indicate which slot should be used. Default: 0.
If board-specific NSH start-up supports more than one MMC/SD slot, then this setting
should be provided to indicate which slot should be used. Default: 0.
config NSH_MMCSDSPIPORTNO
int "MMC/SD SPI device number"
default 0
depends on NSH_LIBRARY && MMCSD && MMCSD_SPI
---help---
If board-specif NSH start-up logic will mount an SPI-based MMC/SD volume, then this setting may be needed to tell the board logic which SPI bus to use. Default: 0 (meaning is board-specific).
If board-specif NSH start-up logic will mount an SPI-based MMC/SD volume, then this
setting may be needed to tell the board logic which SPI bus to use. Default: 0
(meaning is board-specific).
comment "Board-Specific Options"
@ -1672,12 +1677,21 @@ config LIB_BOARDCTL
if LIB_BOARDCTL
config BOARDCTL_POWEROFF
bool "Enable power off command"
bool "Enable power off interfaces"
default n
depends on ARCH_HAVE_POWEROFF
---help---
Enables support for the BOARDIOC_POWEROFF boardctl() command.
Architecture specific logic must provide board_power_off()
Architecture specific logic must provide the board_power_off()
interface.
config BOARDCTL_RESET
bool "Enable reset interfaces"
default n
depends on ARCH_HAVE_RESET
---help---
Enables support for the BOARDIOC_RESET boardctl() command.
Architecture specific logic must provide the board_reset()
interface.
config BOARDCTL_TSCTEST

15
configs/boardctl.c
View file

@ -114,6 +114,21 @@ int boardctl(unsigned int cmd, uintptr_t arg)
break;
#endif
#ifdef CONFIG_BOARDCTL_RESET
/* CMD: BOARDIOC_RESET
* DESCRIPTION: Reset the board
* ARG: Integer value providing power off status information
* CONFIGURATION: CONFIG_BOARDCTL_RESET
* DEPENDENCIES: Board logic must provide board_reset
*/
case BOARDIOC_RESET:
{
ret = board_reset((int)arg);
}
break;
#endif
#ifdef CONFIG_BOARDCTL_TSCTEST
/* CMD: BOARDIOC_TSCTEST_SETUP
* DESCRIPTION: Touchscreen controller test configuration