From c8f9e409dc88c3b3500defc7c64126df0e4180f3 Mon Sep 17 00:00:00 2001 From: zhanghongyu Date: Wed, 1 Nov 2023 14:35:48 +0800 Subject: [PATCH] ioctl: add definitions related to ethtool We reuse the linux platform code when adapting the matter library, in order to compile through, so first add the ethtool related definition Signed-off-by: zhanghongyu --- include/net/if.h | 2 + include/nuttx/ethtool.h | 223 ++++++++++++++++++++++++++++++++++++++ include/nuttx/net/ioctl.h | 4 + 3 files changed, 229 insertions(+) create mode 100644 include/nuttx/ethtool.h diff --git a/include/net/if.h b/include/net/if.h index 1d143f5208..5a604ad979 100644 --- a/include/net/if.h +++ b/include/net/if.h @@ -276,6 +276,7 @@ struct ifreq struct mii_ioctl_data_s ifru_mii_data; /* MII request data */ struct can_ioctl_data_s ifru_can_data; /* CAN bitrate request data */ struct can_ioctl_filter_s ifru_can_filter; /* CAN filter request data */ + FAR void *ifru_data; /* For use by interface */ } ifr_ifru; }; @@ -293,6 +294,7 @@ struct ifreq #define ifr_mii_reg_num ifr_ifru.ifru_mii_data.reg_num /* PHY register address */ #define ifr_mii_val_in ifr_ifru.ifru_mii_data.val_in /* PHY input data */ #define ifr_mii_val_out ifr_ifru.ifru_mii_data.val_out /* PHY output data */ +#define ifr_data ifr_ifru.ifru_data /* for use by interface */ /* Used only with the SIOCGIFCONF IOCTL command */ diff --git a/include/nuttx/ethtool.h b/include/nuttx/ethtool.h new file mode 100644 index 0000000000..1d0c3191f6 --- /dev/null +++ b/include/nuttx/ethtool.h @@ -0,0 +1,223 @@ +/**************************************************************************** + * include/nuttx/ethtool.h + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. The + * ASF licenses this file to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance with the + * License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the + * License for the specific language governing permissions and limitations + * under the License. + * + ****************************************************************************/ + +#ifndef __INCLUDE_NUTTX_ETHTOOL_H +#define __INCLUDE_NUTTX_ETHTOOL_H + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* CMDs currently supported */ +#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings. \ + * Please use ETHTOOL_GLINKSETTINGS \ + **/ +#define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings. \ + * Please use ETHTOOL_SLINKSETTINGS \ + **/ +#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ +#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ +#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ +#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ +#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ +#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ +#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ + +/* Get link status for host, i.e. whether the interface *and* the + * physical port (if there is one) are up (ethtool_value). + **/ + +#define ETHTOOL_GLINK 0x0000000a +#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ +#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ +#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ +#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ +#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ +#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ +#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ +#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ +#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ +#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ +#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ +#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ +#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable \ + * (ethtool_value) \ + **/ +#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable \ + * (ethtool_value). \ + **/ +#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ +#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ +#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ +#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ +#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ +#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ +#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ +#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ +#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ +#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ +#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ +#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ +#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ +#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ +#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ +#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ +#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ +#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ +#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ +#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ +#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ +#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ +#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ +#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ +#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ +#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ +#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ +#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ +#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */ +#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ +#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ +#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ +#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ +#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ +#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ +#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ +#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ +#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ +#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ +#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ +#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ +#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ +#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ +#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ +#define ETHTOOL_GRSSH 0x00000046 /* Get RX flow hash configuration */ +#define ETHTOOL_SRSSH 0x00000047 /* Set RX flow hash configuration */ +#define ETHTOOL_GTUNABLE 0x00000048 /* Get tunable configuration */ +#define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */ +#define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */ +#define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */ +#define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */ +#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */ +#define ETHTOOL_PHY_GTUNABLE 0x0000004e /* Get PHY tunable configuration */ +#define ETHTOOL_PHY_STUNABLE 0x0000004f /* Set PHY tunable configuration */ +#define ETHTOOL_GFECPARAM 0x00000050 /* Get FEC settings */ +#define ETHTOOL_SFECPARAM 0x00000051 /* Set FEC settings */ + +/* Duplex, half or full. */ + +#define DUPLEX_HALF 0x00 +#define DUPLEX_FULL 0x01 +#define DUPLEX_UNKNOWN 0xff + +/**************************************************************************** + * Public Type Definitions + ****************************************************************************/ + +/** + * struct ethtool_cmd - DEPRECATED, link control and status + * This structure is DEPRECATED, please use struct ethtool_link_settings. + * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET + * @supported: Bitmask of %SUPPORTED_* flags for the link modes, + * physical connectors and other link features for which the + * interface supports autonegotiation or auto-detection. + * Read-only. + * @advertising: Bitmask of %ADVERTISED_* flags for the link modes, + * physical connectors and other link features that are + * advertised through autonegotiation or enabled for + * auto-detection. + * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN + * @duplex: Duplex mode; one of %DUPLEX_* + * @port: Physical connector type; one of %PORT_* + * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not + * applicable. For clause 45 PHYs this is the PRTAD. + * @transceiver: Historically used to distinguish different possible + * PHY types, but not in a consistent way. Deprecated. + * @autoneg: Enable/disable autonegotiation and auto-detection; + * either %AUTONEG_DISABLE or %AUTONEG_ENABLE + * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO + * protocols supported by the interface; 0 if unknown. + * Read-only. + * @maxtxpkt: Historically used to report TX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @maxrxpkt: Historically used to report RX IRQ coalescing; now + * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. + * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or + * SPEED_UNKNOWN + * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of + * %ETH_TP_MDI_*. If the status is unknown or not applicable, the + * value will be %ETH_TP_MDI_INVALID. Read-only. + * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of + * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads + * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. + * When written successfully, the link should be renegotiated if + * necessary. + * @lp_advertising: Bitmask of %ADVERTISED_* flags for the link modes + * and other link features that the link partner advertised + * through autonegotiation; 0 if unknown or not applicable. + * Read-only. + * + * The link speed in Mbps is split between @speed and @speed_hi. Use + * the ethtool_cmd_speed() and ethtool_cmd_speed_set() functions to + * access it. + * + * If autonegotiation is disabled, the speed and @duplex represent the + * fixed link mode and are writable if the driver supports multiple + * link modes. If it is enabled then they are read-only; if the link + * is up they represent the negotiated link mode; if the link is down, + * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and + * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. + * + * Some hardware interfaces may have multiple PHYs and/or physical + * connectors fitted or do not allow the driver to detect which are + * fitted. For these interfaces @port and/or @phy_address may be + * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. + * Otherwise, attempts to write different values may be ignored or + * rejected. + * + * Users should assume that all fields not marked read-only are + * writable and subject to validation by the driver. They should use + * %ETHTOOL_GSET to get the current values before making specific + * changes and then applying them with %ETHTOOL_SSET. + * + * Deprecated fields should be ignored by both users and drivers. + **/ + +struct ethtool_cmd +{ + uint32_t cmd; + uint32_t supported; + uint32_t advertising; + uint16_t speed; + uint8_t duplex; + uint8_t port; + uint8_t phy_address; + uint8_t transceiver; + uint8_t autoneg; + uint8_t mdio_support; + uint32_t maxtxpkt; + uint32_t maxrxpkt; + uint16_t speed_hi; + uint8_t eth_tp_mdix; + uint8_t eth_tp_mdix_ctrl; + uint32_t lp_advertising; + uint32_t reserved[2]; +}; + +#endif diff --git a/include/nuttx/net/ioctl.h b/include/nuttx/net/ioctl.h index 69e12dec76..049d12ca5d 100644 --- a/include/nuttx/net/ioctl.h +++ b/include/nuttx/net/ioctl.h @@ -136,6 +136,10 @@ #define SIOCGIFBR _SIOC(0x003A) /* Bridging support */ #define SIOCSIFBR _SIOC(0x003B) /* Set bridging options */ +/* ETH Tool calls ***********************************************************/ + +#define SIOCETHTOOL _SIOC(0x003D) /* Ethtool interface */ + /**************************************************************************** * Public Type Definitions ****************************************************************************/