lupyuen/local-nuttx-update
1
0
Fork 0
forked from nuttx/nuttx-update
Code Pull requests Activity

Update ChangeLog in prep for 7.20 release.

Browse source
This commit is contained in:
Gregory Nutt 2017-03-08 08:34:31 -06:00
parent 6f4b8c9e60
commit e2a554d0f5
3 changed files with 64 additions and 35 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

58
ChangeLog
View file

@ -13475,7 +13475,7 @@
those cases, the release of the pending tasks must be deferred until
those conditions are met (2016-12-26).
7.20 2017-xx-xx Gregory Nutt <gnutt@nuttx.org>
7.20 2017-03-08 Gregory Nutt <gnutt@nuttx.org>
* i.MX6 SMP/NSH configuration: Enable examples/smp test (2016-12-27).
* SMP: There were certain conditions that we must avoid by preventing the
@ -13526,7 +13526,7 @@
From Alan Carvalho de Assis (2017-01-07).
* STM32F429i-DISCO: Enable keyboard input in nxwm configuration
(2017-01-07).
* STM32F428i-DISCO: Change NxWM cursor character from 137 (graphics
* STM32F429i-DISCO: Change NxWM cursor character from 137 (graphics
block) to 95 (underscore). NxWM is configured to use a 7-bit character
set so 137 is not a valid character code (2017-01-07).
* NX server: Correct message queue names. Should not be at /dev, but
@ -13568,7 +13568,7 @@
* STM32 Oneshot: Fix logic so that it can support multiple oneshot timers
(2017-01-18).
* STM32L4: Port fix for multiple oneshot timers from STM32. Also fixes a
few issues with original STM32 implementation (2017-01-xx).
few issues with original STM32 implementation (2017-01-18).
* SAM3/4: Add support for ATSAM4S4C. From Wolfgang Reißnegger (2017-01-18).
* Math library: Leverage optimized ARM functions from BSD license ARM file
(2017-01-19).
@ -13608,7 +13608,7 @@
* STM32: Add missing STM32_BKP_BASE. From David Sidrane (2017-01-23).
* Configurations that enable OSTEST must not disable signals (2017-01-24).
* Add missing sched_note_*() calls to sam4cm SMP functions (2017-01-24).
* Fix return falue if x is NaN. From Aleksandr Vyhovanec (2017-01-25).
* Fix return value if x is NaN. From Aleksandr Vyhovanec (2017-01-25).
* MMCSD_SDIO: Only wait for card ejected if card detection is supported.
From Alan Carvalho de Assis (2017-01-26).
* LPC43 pinset definitions: Add more 1 bit to pinset to reach
@ -13648,7 +13648,7 @@
with STM32F7_; Eliminate CONFIG_SDMMC1/2_DMA altogether. Does not
appear to be used (2017-01-31).
* STM32F429-DISCO: Move some board initialization logic that is not
usuable because it lacks the configuration options to make it so
usable because it lacks the configuration options to make it so
(2017-01-31).
* Cancellation points: Fix some backward logic in conditional compilation
(2017-02-02).
@ -13681,7 +13681,7 @@
* Added MCG settings that are defiend on the K64 SoC. Added
BOARD_MCG_C2_FCFTRIM and BOARD_MCG_C2_LOCRE0 to configure the MCG_C2
register cleanup of some comments. From David Sidrane (2017-02-07).
* Better granualarity and erro checking of the board's MCG settings.
* Better granualarity and errno checking of the board's MCG settings.
Allow for complete MCG_C2 definition from the boart.h file. Moved
#ifdef out of code by setting default values. Allow for individule bit
setting in MCG_C2 for BOARD_EXTCLOCK_MCG_C2, BOARD_MCG_C2_FCFTRIM,
@ -13695,8 +13695,6 @@
* setvbuf: Add support for configuration of line buffering (2017-02-08).
* Bamboo-200E: Add netnsh configuration. From Alan Carvalho de Assis
(2017-02-08).
* Remove comment about being based on a Newlib implementation. That is
not true. This is an original work (2017-02-08).
* USBMSC: Always set LUN readonly flag. From Wolfgang Reißnegger
(2017-02-08).
* drivers/lcd: ssd1306_configspi() must have global scope (2017-02-09).
@ -13706,7 +13704,7 @@
enable/disable buffering (2017-02-09).
* C Library: Clean-up buffer selections in Kconfig (2017-02-09).
* sem_open(): Fix a compiler error introduced with the setvbuf() changes
(2017-02-xx).
(2017-02-09).
* MMC/SD SDIO: Some drivers need to start DMA before sending CMD24 and
some AFTER. From Alan Carvalho de Assis (2017-02-09).
* Kinetis SDHC driver fixes. From Marc Rechté (2017-02-09).
@ -13735,7 +13733,7 @@
which not have Verified MCG configurations.
From David Sidrane (2017-02-09).
* Kinetis chip Adding K66 and inlcuding MCG versioning. This includes
* Kinetis chip Adding K66 and including MCG versioning. This includes
arch/arm/include/kinetis/kinetis_mcg.h to bring in the MCG versioning
and defines the KINETIS_K66 family for the added SoCs:
@ -13749,14 +13747,6 @@
MK66FX1M0VLQ18 180 MHz 144 LQFP 1.25 MB 1 MB 4 KB 256 KB 100
From David Sidrane (2017-02-09).
* Kinetis: MCG defines are based on the MCG feature configuration. We
define the bits as a common set of names. This means that an index may
be added to a name i.e. LOCK is LOCK0 as that is the superset name.
From David Sidrane (2017-02-09).
* Fixes ill defined BOARD_FR_DIV with BOARD_FRDIV from MCG. Original
BOARD_FR_DIV was never used - that is a good thing because the value was
defined shifted and the code also shifited it. From David Sidrane
(2017-02-09).
* STM32: Fixes the bkp reference counter issue. From David Sidrane
(2017-02-09).
* STM32F7: Fixes the bkp reference counter issue. From David Sidrane
@ -13764,7 +13754,7 @@
* C Library: Add setbuf() which is a trivial wrapper around setvbuf()
(2017-02-09).
* tools/mkconfig.c: Add logic to keep all of the buffering options in sync
(2017-02-xx).
(2017-02-10).
* VFS rename: Fix issues with rename to subdirectories and some softlink
issues (2017-02-11).
* Add logic to VFS rename: If target of rename exists and is a directory,
@ -13777,7 +13767,7 @@
pseudo file system, (2) Fix path naming calculation when the path is the
root directory of a mounted file system, and (3) dont't do the rename if
the source and destination of the rename are the same (2017-02-12).
* Add basic fstat() support (2017-02-x12x).
* Add basic fstat() support (2017-02-12).
* Add fstat support to binfs (2017-02-12).
* fstat: Add fstat() support to romfs (2017-02-12).
* fstat: Add fstat() support to unionfs (2017-02-12).
@ -13821,8 +13811,8 @@
define secondary access via AIPS1 to these peripherals. From David
Sidrane (2017-02-14).
* Kinetis: Add support for K66. From David Sidrane (2017-02-14).
* procfs: stat() left several fields in uninitialized state (2017-02-xx).
* hostfs: Add support for fstat() (2017-02-xx).
* procfs: stat() left several fields in uninitialized state (2017-02-14).
* hostfs: Add support for fstat() (2017-02-14).
* procfs: Add support for fstat() (2017-02-14).
* smartfs: Add support for fstat() (2017-02-14).
* Kinetis Freedom K66F: Add Ethernet support. From David Sidrane
@ -13864,7 +13854,7 @@
raiden00 (2017-02-19).
* STM32L4 COMP: Port from Motorola MDK (2017-02-19).
* Add twr-k64f120m config and fix some ENET related problems. From Marc
Rechté (2017-02-xx).
Rechté (2017-02-19).
* STM32 F7: stm32_allocateheap: allow use DTCM memory for heap. STM32F7
has up to 128KiB of DTCM memory that is currently left unused. This
change adds DTCM to main heap if CONFIG_STM32F7_DTCMEXCLUDE is not
@ -13915,7 +13905,7 @@
The exceptions are the CONFIG_ARCH_CHIP_MK60FN1M0VLQ12,
CONFIG_ARCH_CHIP_MK20DXxxxVLH7 All K64 and K66 have been verified PMC
configurations. From David Sidrane (2017-02-xx).
configurations. From David Sidrane (2017-02-22).
* Kinetis: kinetis_clockconfig uses the correct ACKISO. ACKISO is located
in the PMC_REGSC on the majority of the Kinetis SoCs. With the exception
of the MK40DXxxxZVLQ10 where ACKISO is located in LLWU_CS (2017-02-22).
@ -13933,7 +13923,7 @@
* drivers/spi/Kconfig: There is too much SPI in the configuration menu;
SPI Driver Support menu is empty. From Maciej Wójcik (2017-02-23).
* Kinetis: SIM add paramiterized SIM_CLKDIVx_xxFRAC|DIV macros. The makes
for cleaner board definitions. From David Sidrane (2017-02-xx).
for cleaner board definitions. From David Sidrane (2017-02-23).
* kinetis_enet.c add #define for number of loops for auto negotiation to
complete. From Marc Rechté (2017-02-23).
* STM32F4 Discovery: Fix issues with QEncoder support. From Alan Carvalho
@ -13944,7 +13934,7 @@
leave_critical_section() must be called in order to manage spinlocks
correctly (2017-02-23).
* Fix QEncoder driver, based on STM32L4 driver. From Alan Carvalho de
Assis (2017-02-xx).
Assis (2017-02-23).
* STM32 QEncoder. Enable clocking to the timer on QE setup; disable clock
on QE teardown (2017-02-23).
* Kinetis: Extend clockconfig to support SOPT2_PLLFLLSEL and
@ -14007,7 +13997,7 @@
facilitate bring up both UARTs and LPUARTs as devices and a console.
Support ordering and merging of serial devices names. From David
Sidrane (2017-02-27).
* Adapt more drivers to utilize the IRQ argument feature (20167-02-28).
* Adapt more drivers to utilize the IRQ argument feature (2107-02-28).
* irq_attach() and type xcpt_t. irq_attach now accepts a argument that
will be provided to the interrupt handler when the interrupt ocurrs.
This affects many files by replace ad hoc parameter passing logic with a
@ -14090,6 +14080,16 @@
(2017-03-05).
* SAMA5D4-EK: Eliminate warning. Correct type of return value
(2017-03-05).
* STM32F103 Minimum: Eliminate warning stm32_usbdev.o give twice in same
rule (2017-03-).
* STM32F103 Minimum: Eliminate warning stm32_usbdev.o givne twice in same
rule (2017-03-05).
* STM32 OTGHS host: stm32_in_transfer() fails and returns NAK if a
short transfer is received. This causes problems from class drivers
like CDC/ACM where short packets are expected. In those protocols,
any transfer may be terminated by sending short or NUL packet. From
Janne Rosberg. Adapt Janne Rosberg's patch to STM32 OTGHS host to
OTGFS host, and to similar USB host implementations for STM32 L4 and
F7 (2017-03-07).
* usbhost_cdcacm: fix tx outbuffer overflow and remove now invalid
assert. From Janne Rosberg (2017-03-07).
7.21 2017-xx-xx Gregory Nutt <gnutt@nuttx.org>

39
TODO
View file

@ -1,4 +1,4 @@
NuttX TODO List (Last updated March 4, 2017)
NuttX TODO List (Last updated March 7, 2017)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This file summarizes known NuttX bugs, limitations, inconsistencies with
@ -1196,7 +1196,7 @@ o USB (drivers/usbdev, drivers/usbhost)
from being usable:
- The driver works fine when configured for reduced or bulk-
only protocol.
only protocol on the Olimex LPC1766STK.
- Testing has not been performed with the interrupt IN channel
enabled (ie., I have not enabled FLOW control nor do I have
@ -1221,6 +1221,32 @@ o USB (drivers/usbdev, drivers/usbhost)
Apparently the host driver is trashing memory on receipt
of data.
UPDATE: This behavior needs to be retested with:
commit ce2845c5c3c257d081f624857949a6afd4a4668a
Author: Janne Rosberg <janne.rosberg@offcode.fi>
Date: Tue Mar 7 06:58:32 2017 -0600
usbhost_cdcacm: fix tx outbuffer overflow and remove now
invalid assert
commit 3331e9c49aaaa6dcc3aefa6a9e2c80422ffedcd3
Author: Janne Rosberg <janne.rosberg@offcode.fi>
Date: Tue Mar 7 06:57:06 2017 -0600
STM32 OTGHS host: stm32_in_transfer() fails and returns NAK
if a short transfer is received. This causes problems from
class drivers like CDC/ACM where short packets are expected.
In those protocols, any transfer may be terminated by sending
short or NUL packet.
commit 0631c1aafa76dbaa41b4c37e18db98be47b60481
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Tue Mar 7 07:17:24 2017 -0600
STM32 OTGFS, STM32 L4 and F7: Adapt Janne Rosberg's patch to
STM32 OTGHS host to OTGFS host, and to similar implements for
L4 and F7.
- The SAMA5D EHCI and the LPC31 EHCI drivers both take semaphores
in the cancel method. The current CDC/ACM class driver calls
the cancel() method from an interrupt handler. This will
@ -1234,9 +1260,12 @@ o USB (drivers/usbdev, drivers/usbhost)
configurations if you use it.
That all being said, I know of know no issues with the current
CDC/ACM driver if the interrupt IN endpoint is not used, i.e.,
in "reduced" mode. The only loss of functionality is output
flow control.
CDC/ACM driver on the Olimex LPC1766STK platform if the interrupt
IN endpoint is not used, i.e., in "reduced" mode. The only loss
of functionality is output flow control.
UPDATE: The CDC/ACM class driver may also now be functional on
the STM32. That needs to be verified.
Status: Open
Priority: Medium-Low unless you really need host CDC/ACM support.

2
include/nuttx/sched_note.h
View file

@ -119,7 +119,7 @@ struct note_common_s
uint8_t nc_cpu; /* CPU thread/task running on */
#endif
uint8_t nc_pid[2]; /* ID of the thread/task */
uint8_t nc_systime[4]; /* Time when note buffered */
uint8_t nc_systime[4]; /* Time when note was buffered */
};
/* This is the specific form of the NOTE_START note */