This patch adds support for velocity measurement sensors.
I plan to use it as a generic velocity type to be used for
Renesas FS3000 (Air Velocity Flow).
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
currently, nuttx implements readv/writev on the top of read/write.
while it might work for the simplest cases, it's broken by design.
for example, it's impossible to make it work correctly for files
which need to preserve data boundaries without allocating a single
contiguous buffer. (udp socket, some character devices, etc)
this change is a start of the migration to a better design.
that is, implement read/write on the top of readv/writev.
to avoid a single huge change, following things will NOT be done in
this commit:
* fix actual bugs caused by the original readv-based-on-read design.
(cf. https://github.com/apache/nuttx/pull/12674)
* adapt filesystems/drivers to actually benefit from the new interface.
(except a few trivial examples)
* eventually retire the old interface.
* retire read/write syscalls. implement them in libc instead.
* pread/pwrite/preadv/pwritev (except the introduction of struct uio,
which is a preparation to back these variations with the new
interface.)
When the system cannot obtain buffers for a long time, hpwork will hold
a lot of buffers. However, due to a deadlock between the rptun thread
and hpwork, hpwork cannot send the buffers in time, causing the system
to crash.
so, avoid hold sre lock in rptun thread.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
if remote not set CONFIG_SENSOR_RPMSG, local can't receive NS_ACK
so sensor_rpmsg_device_ns_bound won't be called, not add sre->node
when local stop remote, rpmsg_deinit_vdev will call sensor_rpmsg_ns_unbind_cb
if (ept && ept->ns_unbind_cb)
ept->ns_unbind_cb(ept);
list_delete node is NULL at sensor_rpmsg_ns_unbind_cb
Signed-off-by: yintao <yintao@xiaomi.com>
When the ipc buffer is obtained for the first time due to insufficient space,
it waits due to insufficient ipc buffer.
At this time, if rptun recursively operates the next ipc request, the ipc buffer
will be reused, but it has been released at this time.
0 file_read (filep=filep@entry=0x20596738, buf=buf@entry=0x205d4358, nbytes=1560) at vfs/fs_read.c:86
1 sensor_rpmsg_push_event_one (dev=0x20558f70, dev@entry=0x2058fc80, stub=stub@entry=0x20596720) at sensors/sensor_rpmsg.c:799
2 sensor_rpmsg_alloc_stub (dev=dev@entry=0x2058fc80, ept=ept@entry=0x20558f08, cookie=<optimized out>) at sensors/sensor_rpmsg.c:552
3 sensor_rpmsg_sub_handler (ept=0x20558f08, data=0x204849c0, len=51, src=<optimized out>, priv=0x20558f00) at sensors/sensor_rpmsg.c:993
4 sensor_rpmsg_ept_cb (ept=<optimized out>, data=<optimized out>, len=<optimized out>, src=<optimized out>, priv=0x20558f00) at sensors/sensor_rpmsg.c:1186
5 rpmsg_virtio_rx_callback (vq=<optimized out>) at open-amp/lib/rpmsg/rpmsg_virtio.c:605
6 virtqueue_notification (vq=<optimized out>) at open-amp/lib/virtio/virtqueue.c:711
7 rproc_virtio_notified (vdev=vdev@entry=0x20558c98, notifyid=notifyid@entry=4294967295) at open-amp/lib/remoteproc/remoteproc_virtio.c:433
8 remoteproc_get_notification (rproc=rproc@entry=0x2054ff34, notifyid=notifyid@entry=4294967295) at open-amp/lib/remoteproc/remoteproc.c:1002
9 rptun_worker (arg=0x2054ff30) at rptun/rptun.c:339
10 rptun_notify_wait (rproc=<optimized out>, id=<optimized out>) at rptun/rptun.c:543
11 remoteproc_virtio_notify_wait (priv=<optimized out>, id=<optimized out>) at open-amp/lib/remoteproc/remoteproc.c:907
12 rproc_virtio_notify_wait (vdev=<optimized out>, vq=<optimized out>) at open-amp/lib/remoteproc/remoteproc_virtio.c:176
13 rpmsg_virtio_notify_wait (vq=<optimized out>, rvdev=0x2054ff78) at nuttx/include/openamp/rpmsg_virtio.h:162
14 rpmsg_virtio_get_tx_payload_buffer (rdev=0x2054ff78, len=0x20558f90, wait=<optimized out>) at open-amp/lib/rpmsg/rpmsg_virtio.c:404
15 rpmsg_get_tx_payload_buffer (ept=ept@entry=0x20558f08, len=len@entry=0x20558f90, wait=wait@entry=1) at open-amp/lib/rpmsg/rpmsg.c:207
16 sensor_rpmsg_push_event_one (dev=0x0, dev@entry=0x20590d60, stub=stub@entry=0x20596720) at sensors/sensor_rpmsg.c:783
17 sensor_rpmsg_alloc_stub (dev=dev@entry=0x20590d60, ept=ept@entry=0x20558f08, cookie=<optimized out>) at sensors/sensor_rpmsg.c:552
18 sensor_rpmsg_sub_handler (ept=0x20558f08, data=0x20483700, len=49, src=<optimized out>, priv=0x20558f00) at sensors/sensor_rpmsg.c:993
19 sensor_rpmsg_ept_cb (ept=<optimized out>, data=<optimized out>, len=<optimized out>, src=<optimized out>, priv=0x20558f00) at sensors/sensor_rpmsg.c:1186
20 rpmsg_virtio_rx_callback (vq=<optimized out>) at open-amp/lib/rpmsg/rpmsg_virtio.c:605
21 virtqueue_notification (vq=<optimized out>) at open-amp/lib/virtio/virtqueue.c:711
22 rproc_virtio_notified (vdev=vdev@entry=0x20558c98, notifyid=notifyid@entry=4294967295) at open-amp/lib/remoteproc/remoteproc_virtio.c:433
23 remoteproc_get_notification (rproc=0x2054ff34, rproc, notifyid=notifyid@entry=4294967295)
24 rptun_worker (arg=0x2054ff30) at rptun/rptun.c:339
25 rptun_thread (argc=<optimized out>, argv=<optimized out>) at rptun/rptun.c:375
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
When its remote core publishes a message, all subscribed cores will receive the message,
but the local core "stublist" does not update the user's "generation" and "bufferpos" parameters.
Signed-off-by: likun17 <likun17@xiaomi.com>
After the ap core subscribes to the 25hz batch 120ms data of the sensor core, it switches
to the cp core and subscribes to the 50hz batch 120ms sensor core data. At this time,
the data subscribed by the AP will be abnormally lost (12.5hz). Mainly because ap
subscribes to sensor core data earlier than cp. The subscription of cp will be broadcast
to the ap core at the same time, and the corresponding "path" already exists
under "/dev/uorb" of ap. Thus the ap will create a "stub".
There are some restrictions on the creation of "stub" to avoid this situation.
Signed-off-by: likun17 <likun17@xiaomi.com>
1. notify POLLIN to reader.
2. notify POLLPRI to writer,
in addition, notify POLLPRI to the user who completed the flush .
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Supports the flush operation of the sensor.
The application can initiate a flush action through ioctl SNIOC_FLUSH
to trigger flush, and the call will be returned immediately.
Using SNIOC_GET_EVENTS to clear flush event,
However, the flush implementation is asynchronous, when all the flush
data is push to upper circbuffer, the POLLPRI event(FLUSH_COMPLETED)
will be reported.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
When there is an actual physical sensor, the driver must implement the get info interface. The upper layer can obtain the actual physical sensor information through SNIOC_GET_INFO.
SNIOC_SET_INFO can only set the information of the local virtual sensor, which means it is bound to the local advertisement. Remote subscribers cannot set the information.
Usage:
struct sensor_device_info dev_info;
orb_ioctl(fd, SNIOC_GET_INFO, (unsigned long)(uintptr_t)&dev_info);
or:
ret = orb_set_info(fd, &dev_info);
ret = orb_get_info(fd, &dev_info);
Signed-off-by: likun17 <likun17@xiaomi.com>
