local-nuttx-update/include/nuttx/1wire/1wire.h

/****************************************************************************
 * include/nuttx/1wire/1wire.h
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

#ifndef __INCLUDE_NUTTX_1WIRE_1WIRE_H
#define __INCLUDE_NUTTX_1WIRE_1WIRE_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <stdbool.h>

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Supported 1-Wire commands */

#define ONEWIRE_CMD_SEARCH           0xf0
#define ONEWIRE_CMD_ALARM_SEARCH     0xec
#define ONEWIRE_CMD_SKIP_ROM         0xcc
#define ONEWIRE_CMD_COPY_SCRATCHPAD  0x48
#define ONEWIRE_CMD_WRITE_SCRATCHPAD 0x4e
#define ONEWIRE_CMD_READ_SCRATCHPAD  0xbe
#define ONEWIRE_CMD_READ_ROM         0x33
#define ONEWIRE_CMD_MATCH_ROM        0x55
#define ONEWIRE_CMD_RESUME           0xa5

/****************************************************************************
 * Name: ONEWIRE_RESET
 *
 * Description:
 *   Reset pulse and presence detect. Each write operational will be an
 *   'atomic' operation in the sense that any other 1-Wire actions will be
 *   serialized and pend until this write completes.
 *
 * Input Parameters:
 *   dev    - Device-specific state data
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

#define ONEWIRE_RESET(d) ((d)->ops->reset(d))

/****************************************************************************
 * Name: ONEWIRE_WRITE
 *
 * Description:
 *   Send a block of data on 1-Wire. Each write operational will be an
 *   'atomic' operation in the sense that any other 1-Wire actions will be
 *   serialized and pend until this write completes.
 *
 * Input Parameters:
 *   dev    - Device-specific state data
 *   buffer - A pointer to the read-only buffer of data to be written to
 *   device buflen - The number of bytes to send from the buffer
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

#define ONEWIRE_WRITE(d,b,l) ((d)->ops->write(d,b,l))

/****************************************************************************
 * Name: ONEWIRE_READ
 *
 * Description:
 *   Receive a block of data from 1-Wire. Each read operational will be an
 *   'atomic' operation in the sense that any other 1-Wire actions will be
 *   serialized and pend until this read completes.
 *
 * Input Parameters:
 *   dev    - Device-specific state data
 *   buffer - A pointer to a buffer of data to receive the data from the
 *   device buflen - The requested number of bytes to be read
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

#define ONEWIRE_READ(d,b,l) ((d)->ops->read(d,b,l))

/****************************************************************************
 * Name: ONEWIRE_EXCHANGE
 *
 * Description:
 *   Reset pulse and presence detect, send a block of data and receive a
 *   block of data from 1-Wire. Each write operational will be an 'atomic'
 *   operation in the sense that any other 1-Wire actions will be
 *   serialized and pend until this write completes.
 *
 * Input Parameters:
 *   dev      - Device-specific state data
 *   reset    - Reset pulse and presence detect
 *   txbuffer - A pointer to the read-only buffer of data to be written to
 *              device
 *   txbuflen - The number of bytes to send from the buffer
 *   rxbuffer - A pointer to a buffer of data to receive the data from the
 *              device
 *   rxbuflen - The requested number of bytes to be read
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

#define ONEWIRE_EXCHANGE(d,r,tx,tl,rx,rl) ((d)->ops->exchange(d,r,tx,tl,rx,rl))

/****************************************************************************
 * Name: ONEWIRE_WRITEBIT
 *
 * Description:
 *   Send a single bit on 1-Wire. Each write operational will be an 'atomic'
 *   operation in the sense that any other 1-Wire actions will be serialized
 *   and pend until this write completes.
 *
 * Input Parameters:
 *   dev    - Device-specific state data
 *   buffer - A pointer to the read-only 1 byte buffer for the bit value
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

#define ONEWIRE_WRITEBIT(d,b) ((d)->ops->writebit(d,b))

/****************************************************************************
 * Name: ONEWIRE_READBIT
 *
 * Description:
 *   Sample a single bit from 1-Wire. Each read operational will be an
 *   'atomic' operation in the sense that any other 1-Wire actions will be
 *   serialized and pend until this read completes.
 *
 * Input Parameters:
 *   dev    - Device-specific state data
 *   buffer - A pointer to a 1 byte buffer for the bit value
 *
 * Returned Value:
 *   0: success, <0: A negated errno
 *
 ****************************************************************************/

#define ONEWIRE_READBIT(d,b) ((d)->ops->readbit(d,b))

/****************************************************************************
 * Public Types
 ****************************************************************************/

/* The 1-Wire vtable */

struct onewire_dev_s;
struct onewire_ops_s
{
  CODE int (*reset)(FAR struct onewire_dev_s *dev);
  CODE int (*write)(FAR struct onewire_dev_s *dev, FAR const uint8_t *buffer,
                    int buflen);
  CODE int (*read)(FAR struct onewire_dev_s *dev, FAR uint8_t *buffer,
                   int buflen);
  CODE int (*exchange)(FAR struct onewire_dev_s *dev, bool reset,
                       FAR const uint8_t *txbuffer, int txbuflen,
                       FAR uint8_t *rxbuffer, int rxbuflen);
  CODE int (*writebit)(FAR struct onewire_dev_s *dev,
                       FAR const uint8_t *bit);
  CODE int (*readbit)(FAR struct onewire_dev_s *dev, FAR uint8_t *bit);
};

/* 1-Wire private data. This structure only defines the initial fields of the
 * structure visible to the 1-Wire client. The specific implementation may
 * add additional, device specific fields after the vtable.
 */

struct onewire_dev_s
{
  FAR const struct onewire_ops_s *ops; /* 1-Wire vtable */
};

/****************************************************************************
 * Public Functions Definitions
 ****************************************************************************/

#endif /* __INCLUDE_NUTTX_1WIRE_1WIRE_H */