.. |
bt_atomic.c
|
wireless/bluetooth and include/nutt/net: Add support for Bluetooth IOCTL commands.
|
2018-03-30 10:50:44 -06:00 |
bt_atomic.h
|
wireless/bluetooth and include/nutt/net: Add support for Bluetooth IOCTL commands.
|
2018-03-30 10:50:44 -06:00 |
bt_att.c
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_att.h
|
Squashed commit of the following:
|
2018-04-01 12:25:30 -06:00 |
bt_buf.c
|
drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.
|
2018-04-06 16:22:49 -06:00 |
bt_buf.h
|
Squashed commit of the following:
|
2018-04-01 12:25:30 -06:00 |
bt_conn.c
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_conn.h
|
wireless/bluetooth: Adds most of the logic to get the Tx path working. Still missing the logic to recover the Bluetooth connection structure given the destination address in the socket address.
|
2018-04-01 14:00:40 -06:00 |
bt_gatt.c
|
Squashed commit of the following:
|
2018-04-01 12:25:30 -06:00 |
bt_hcicore.c
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_hcicore.h
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_ioctl.c
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_ioctl.h
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_keys.c
|
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
|
2018-03-29 12:39:22 -06:00 |
bt_keys.h
|
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
|
2018-03-29 12:39:22 -06:00 |
bt_l2cap.c
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_l2cap.h
|
Squashed commit of the following:
|
2018-04-01 12:25:30 -06:00 |
bt_netdev.c
|
wireless/bluetooth and drivers/wireless/bluetooth: Simply the driver registration/initialization interface.
|
2018-04-14 11:33:29 -06:00 |
bt_queue.c
|
wireless/bluetooth: A few trivial fixes from initial testing with the simulator. The simulated Bluetooth device is probably going to be in adequate for any level of testing.
|
2018-04-03 16:28:22 -06:00 |
bt_queue.h
|
wireless/bluetooth: With change the test with the simulated bluetooth driver can get all the way up the point where it determines that the attached controller is not LE capable. I am not sure how much first to take the simulation. The time would probably be better invested in bringing up real hardware.
|
2018-04-03 17:57:06 -06:00 |
bt_smp.c
|
drivers/bluetooth: Extend device simulation. Now makes it all the way through initialization without error. wireless/bluetooth: Add support for IOCTL commangs to get BR/EDR and LE features.
|
2018-04-06 16:22:49 -06:00 |
bt_smp.h
|
Squashed commit of the following:
|
2018-04-01 12:25:30 -06:00 |
bt_uuid.c
|
This commit brings in the Bluetooth stack from the Intel/Zephyr arduino101_firmware_source-v1.tar package.
|
2018-03-29 12:39:22 -06:00 |
Kconfig
|
wireless/bluetooth and net/bluetooth: Clean up some garbage left in Kconfig file that broke 'make menuconfig'. Clean up some craziness with Bluetooth frame length definitions.
|
2018-04-01 15:21:58 -06:00 |
Make.defs
|
This comment adds (1) basic support for AF_BLUETOOTH sockets. The logic compiles but is still incomplete. Support for Bluetooth is general is still dependent on CONFIG_EXPERMIMENTAL because it is not yet ready for used.
|
2018-03-31 14:55:03 -06:00 |