lupyuen/pinephone-nuttx
1
0
Fork 0
mirror of https://github.com/lupyuen/pinephone-nuttx.git synced 2025-01-12 20:58:34 +08:00
Code Issues Projects Releases Packages Wiki Activity Actions 1

Clean up

Browse source
This commit is contained in:
Lee Lup Yuen 2022-12-20 19:11:58 +08:00
parent 9957fa95ce
commit 763d3d907e
2 changed files with 11 additions and 13 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
test/debug.h
View file

@ -1,5 +1,3 @@
#define _err printf
#define _info printf
#define gerr printf
#define ginfo printf
#define ginfodumpbuffer(msg, buf, len) dump_buffer(buf, len)

22
test/test_a64_rsb.c
View file

@ -33,7 +33,7 @@ int display_board_init(void)
// sunxi_gpio_set_cfgbank: bank_offset=119, val=1
// clrsetbits 0x1c20874, 0xf0000000, 0x10000000
// TODO: Should 0xf0000000 be 0x70000000 instead?
_info("Configure PD23 for Output\n");
ginfo("Configure PD23 for Output\n");
#define PD_CFG2_REG (PIO_BASE_ADDRESS + 0x74)
DEBUGASSERT(PD_CFG2_REG == 0x1c20874);
#define PD23_SELECT (0b001 << 28)
@ -49,7 +49,7 @@ int display_board_init(void)
// sunxi_gpio_output: pin=0x77, val=0
// before: 0x1c2087c = 0x1c0000
// after: 0x1c2087c = 0x1c0000 (DMB)
_info("Set PD23 to Low\n");
ginfo("Set PD23 to Low\n");
#define PD_DATA_REG (PIO_BASE_ADDRESS + 0x7C)
DEBUGASSERT(PD_DATA_REG == 0x1c2087c);
#define PD23 (1 << 23)
@ -59,7 +59,7 @@ int display_board_init(void)
// DLDO1 powers the Front Camera / USB HSIC / I2C Sensors
// Register 0x15: DLDO1 Voltage Control (AXP803 Page 52)
// Set Voltage (Bits 0 to 4) to 26 (2.6V + 0.7V = 3.3V)
_info("Set DLDO1 Voltage to 3.3V\n");
ginfo("Set DLDO1 Voltage to 3.3V\n");
#define DLDO1_Voltage_Control 0x15
#define DLDO1_Voltage (26 << 0)
int ret1 = pmic_write(DLDO1_Voltage_Control, DLDO1_Voltage);
@ -77,7 +77,7 @@ int display_board_init(void)
// GPIO0LDO powers the Capacitive Touch Panel
// Register 0x91: GPIO0LDO and GPIO0 High Level Voltage Setting (AXP803 Page 77)
// Set GPIO0LDO and GPIO0 High Level Voltage (Bits 0 to 4) to 26 (2.6V + 0.7V = 3.3V)
_info("Set LDO Voltage to 3.3V\n");
ginfo("Set LDO Voltage to 3.3V\n");
#define GPIO0LDO_High_Level_Voltage_Setting 0x91
#define GPIO0LDO_High_Level_Voltage (26 << 0)
int ret3 = pmic_write(GPIO0LDO_High_Level_Voltage_Setting, GPIO0LDO_High_Level_Voltage);
@ -86,7 +86,7 @@ int display_board_init(void)
// Enable LDO Mode on GPIO0
// Register 0x90: GPIO0 (GPADC) Control (AXP803 Page 76)
// Set GPIO0 Pin Function Control (Bits 0 to 2) to 0b11 (Low Noise LDO on)
_info("Enable LDO mode on GPIO0\n");
ginfo("Enable LDO mode on GPIO0\n");
#define GPIO0_Control 0x90
#define GPIO0_Pin_Function (0b11 << 0)
int ret4 = pmic_write(GPIO0_Control, GPIO0_Pin_Function);
@ -96,7 +96,7 @@ int display_board_init(void)
// DLDO2 powers the MIPI DSI Connector
// Register 0x16: DLDO2 Voltage Control (AXP803 Page 52)
// Set Voltage (Bits 0 to 4) to 11 (1.1V + 0.7V = 1.8V)
_info("Set DLDO2 Voltage to 1.8V\n");
ginfo("Set DLDO2 Voltage to 1.8V\n");
#define DLDO2_Voltage_Control 0x16
#define DLDO2_Voltage (11 << 0)
int ret5 = pmic_write(DLDO2_Voltage_Control, DLDO2_Voltage);
@ -120,9 +120,9 @@ static int pmic_write(
)
{
// Write to AXP803 PMIC on Reduced Serial Bus
_info("pmic_write: reg=0x%x, val=0x%x\n", reg, val);
ginfo("pmic_write: reg=0x%x, val=0x%x\n", reg, val);
int ret = a64_rsb_write(AXP803_RT_ADDR, reg, val);
if (ret != 0) { _err("pmic_write Error: ret=%d\n", ret); }
if (ret != 0) { gerr("pmic_write Error: ret=%d\n", ret); }
return ret;
}
@ -133,9 +133,9 @@ static int pmic_read(
)
{
// Read from AXP803 PMIC on Reduced Serial Bus
_info("pmic_read: reg_addr=0x%x\n", reg_addr);
ginfo("pmic_read: reg_addr=0x%x\n", reg_addr);
int ret = a64_rsb_read(AXP803_RT_ADDR, reg_addr);
if (ret < 0) { _err("pmic_read Error: ret=%d\n", ret); }
if (ret < 0) { gerr("pmic_read Error: ret=%d\n", ret); }
return ret;
}
#endif
@ -148,7 +148,7 @@ static int pmic_clrsetbits(
)
{
// Read from AXP803 PMIC on Reduced Serial Bus
_info("pmic_clrsetbits: reg=0x%x, clr_mask=0x%x, set_mask=0x%x\n", reg, clr_mask, set_mask);
ginfo("pmic_clrsetbits: reg=0x%x, clr_mask=0x%x, set_mask=0x%x\n", reg, clr_mask, set_mask);
int ret = a64_rsb_read(AXP803_RT_ADDR, reg);
if (ret < 0) { return ret; }