Make sure that labeling is used consistently in all function headers (part 3).

arch/arm/src/armv7-a/gtm.h

@@ -111,17 +111,6 @@ extern "C"
 #define EXTERN extern
 #endif
 
-/****************************************************************************
- * Name:
- *
- * Description:
- *
- * Input Parameters:
- *
- * Returned Value:
- *
- ****************************************************************************/
-
 /* Clocking:
  *   CLK - This is the main clock of the Cortex-A9 processor.  All Cortex-A9
  *     processors in the Cortex-A9 MPCore processor and the SCU are clocked

arch/arm/src/efm32/efm32_flash.c

@@ -258,7 +258,7 @@ int __ramfunc__ msc_load_verify_address(uint32_t *address)
 }
 
 /****************************************************************************
- * Name:msc_load_data
+ * Name: msc_load_data
  *
  * Description:
  *   Perform data phase of FLASH write cycle.

arch/arm/src/sama5/sam_tsd.c

@@ -1034,7 +1034,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:sam_tsd_ioctl
+ * Name: sam_tsd_ioctl
  ****************************************************************************/
 
 static int sam_tsd_ioctl(struct file *filep, int cmd, unsigned long arg)

arch/arm/src/stm32/stm32_ltdc.c

@@ -1949,7 +1949,7 @@ static void stm32_ltdc_lenable(FAR struct stm32_layer_s *layer)
 }
 
 /****************************************************************************
- * Name stm32_ltdc_lclear
+ * Name: stm32_ltdc_lclear
  *
  * Description:
  *   Clear the whole layer

arch/arm/src/stm32f7/stm32_ltdc.c

@@ -1959,7 +1959,7 @@ static void stm32_ltdc_lenable(FAR struct stm32_layer_s *layer)
 }
 
 /****************************************************************************
- * Name stm32_ltdc_lclear
+ * Name: stm32_ltdc_lclear
  *
  * Description:
  *   Clear the whole layer

arch/sim/src/up_framebuffer.c

@@ -308,7 +308,7 @@ static int up_getcursor(FAR struct fb_vtable_s *vtable,
 #endif
 
 /****************************************************************************
- * Name:
+ * Name: up_setcursor
  ****************************************************************************/
 
 #ifdef CONFIG_FB_HWCURSOR

arch/sim/src/up_touchscreen.c

@@ -486,7 +486,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:up_ioctl
+ * Name: up_ioctl
  ****************************************************************************/
 
 static int up_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

arch/x86/src/i486/up_irq.c

@@ -81,7 +81,7 @@ static struct idt_entry_s idt_entries[256];
  ****************************************************************************/
 
 /****************************************************************************
- * Name idt_outb
+ * Name: idt_outb
  *
  * Description:
  *   A slightly slower version of outb
@@ -94,7 +94,7 @@ static void idt_outb(uint8_t val, uint16_t addr)
 }
 
 /****************************************************************************
- * Name up_remappic
+ * Name: up_remappic
  *
  * Description:
  *   Remap the PIC.  The Programmable Interrupt Controller (PIC) is used to
@@ -142,7 +142,7 @@ static void up_remappic(void)
 }
 
 /****************************************************************************
- * Name up_idtentry
+ * Name: up_idtentry
  *
  * Description:
  *   Initialize one IDT entry.
@@ -168,7 +168,7 @@ static void up_idtentry(unsigned int index, uint32_t base, uint16_t sel,
 }
 
 /****************************************************************************
- * Name up_idtinit
+ * Name: up_idtinit
  *
  * Description:
  *   Initialize the IDT. The Interrupt Descriptor Table (IDT) is a data

arch/x86/src/qemu/qemu_handlers.c

@@ -65,7 +65,7 @@ static void idt_outb(uint8_t val, uint16_t addr) noinline_function;
  ****************************************************************************/
 
 /****************************************************************************
- * Name idt_outb
+ * Name: idt_outb
  *
  * Description:
  *   A slightly slower version of outb

arch/xtensa/src/esp32/rom/esp32_gpio.h

@@ -329,7 +329,7 @@ void gpio_matrix_out(uint32_t gpio, uint32_t signal_idx, bool out_inv,
                      bool oen_inv);
 
 /****************************************************************************
- * Name:
+ * Name: gpio_pad_select_gpio
  *
  * Description:
  *   Select pad as a gpio function from IOMUX.

configs/mikroe-stm32f4/src/stm32_touchscreen.c

@@ -1328,7 +1328,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:tc_ioctl
+ * Name: tc_ioctl
  ****************************************************************************/
 
 static int tc_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

configs/pic32mx7mmb/src/pic32_touchscreen.c

@@ -1197,7 +1197,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:tc_ioctl
+ * Name: tc_ioctl
  ****************************************************************************/
 
 static int tc_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

configs/stm32f103-minimum/src/stm32f103_minimum.h

@@ -331,7 +331,7 @@ int stm32_qencoder_initialize(FAR const char *devpath, int timer);
 #endif
 
 /****************************************************************************
- * Name stm32_rgbled_setup
+ * Name: stm32_rgbled_setup
  *
  * Description:
  *   This function is called by board initialization logic to configure the

configs/stm32f4discovery/src/stm32f4discovery.h

@@ -720,7 +720,7 @@ int stm32_pca9635_initialize(void);
 #endif
 
 /****************************************************************************
- * Name stm32_rgbled_setup
+ * Name: stm32_rgbled_setup
  *
  * Description:
  *   This function is called by board initialization logic to configure the
@@ -761,7 +761,7 @@ int stm32_timer_driver_setup(FAR const char *devpath, int timer);
 #endif
 
 /****************************************************************************
- * Name xen1210_archinitialize
+ * Name: xen1210_archinitialize
  *
  * Description:
  *   This function is called by board initialization logic to configure the

drivers/bch/bchdev_driver.c

@@ -314,7 +314,7 @@ static ssize_t bch_read(FAR struct file *filep, FAR char *buffer, size_t len)
 }
 
 /****************************************************************************
- * Name:bch_write
+ * Name: bch_write
  ****************************************************************************/
 
 static ssize_t bch_write(FAR struct file *filep, FAR const char *buffer, size_t len)

drivers/input/ads7843e.c

@@ -975,7 +975,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:ads7843e_ioctl
+ * Name: ads7843e_ioctl
  ****************************************************************************/
 
 static int ads7843e_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

drivers/input/ft5x06.c

@@ -977,7 +977,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:ft5x06_ioctl
+ * Name: ft5x06_ioctl
  ****************************************************************************/
 
 static int ft5x06_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

drivers/input/max11802.c

@@ -981,7 +981,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:max11802_ioctl
+ * Name: max11802_ioctl
  ****************************************************************************/
 
 static int max11802_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

drivers/input/mxt.c

@@ -1499,7 +1499,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:mxt_ioctl
+ * Name: mxt_ioctl
  ****************************************************************************/
 
 static int mxt_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

drivers/input/tsc2007.c

@@ -1029,7 +1029,7 @@ errout:
 }
 
 /****************************************************************************
- * Name:tsc2007_ioctl
+ * Name: tsc2007_ioctl
  ****************************************************************************/
 
 static int tsc2007_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

drivers/wireless/cc3000/cc3000.c

@@ -1189,7 +1189,7 @@ errout_without_sem:
 }
 
 /****************************************************************************
- * Name:cc3000_write
+ * Name: cc3000_write
  *
  * Bit of non standard buffer management ahead
  * The buffer is memory allocated in the user space with space for the spi
@@ -1306,7 +1306,7 @@ errout_without_sem:
 }
 
 /****************************************************************************
- * Name:cc3000_ioctl
+ * Name: cc3000_ioctl
  ****************************************************************************/
 
 static int cc3000_ioctl(FAR struct file *filep, int cmd, unsigned long arg)

drivers/wireless/cc3000/cc3000_common.c

@@ -40,7 +40,7 @@
 #include <stdint.h>
 
 /****************************************************************************
- * Name:__error__
+ * Name: __error__
  *
  * Description:
  *   Stub function for ASSERT macro

drivers/wireless/spirit/include/spirit_general.h

@@ -123,15 +123,4 @@ enum spirit_version_e
  * Public Function Prototypes
  ******************************************************************************/
 
-/******************************************************************************
- * Name:
- *
- * Description:
- *
- * Input Parameters:
- *
- * Returned Value:
- *
- ******************************************************************************/
-
 #endif /* __DRIVERS_WIRELESS_SPIRIT_INCLUDE_SPIRIT_GENERAL_H */

drivers/wireless/spirit/lib/spirit_linearfifo.c

@@ -102,7 +102,7 @@ uint8_t spirit_fifo_get_txcount(FAR struct spirit_library_s *spirit)
 }
 
 /******************************************************************************
- * Name:
+ * Name: spirit_fifo_set_rxalmostfull
  *
  * Description:
  *   Sets the almost full threshold for the Rx FIFO. When the number of

include/hex2bin.h

@@ -146,7 +146,7 @@ int hex2bin(FAR struct lib_instream_s *instream,
             uint32_t endpaddr, enum hex2bin_swap_e swap);
 
 /****************************************************************************
- * Name hex2mem
+ * Name: hex2mem
  *
  * Description:
  *   Read the Intel HEX ASCII data provided on the file descriptor 'fd' and
@@ -173,7 +173,7 @@ int hex2mem(int fd, uint32_t baseaddr, uint32_t endpaddr,
             enum hex2bin_swap_e swap);
 
 /****************************************************************************
- * Name fhex2mem
+ * Name: fhex2mem
  *
  * Description:
  *   Read the Intel HEX ASCII data provided on the standard stream

include/nuttx/net/net.h

@@ -393,7 +393,7 @@ void net_setipid(uint16_t id);
 int net_checksd(int fd, int oflags);
 
 /****************************************************************************
- * Name:
+ * Name: net_initlist
  *
  * Description:
  *   Initialize a list of sockets for a new task

include/nuttx/nx/nx.h

@@ -295,7 +295,7 @@ int nx_runinstance(FAR const char *mqname, FAR NX_DRIVERTYPE *dev);
 int nx_start(void);
 
 /****************************************************************************
- * Name:nx_connectinstance (and nx_connect macro)
+ * Name: nx_connectinstance (and nx_connect macro)
  *
  * Description:
  *   Open a connection from a client to the NX server.  One one client

libc/hex2bin/lib_fhex2mem.c

@@ -52,7 +52,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name fhex2mem
+ * Name: fhex2mem
  *
  * Description:
  *   Read the Intel HEX ASCII data provided on the standard stream

libc/hex2bin/lib_hex2mem.c

@@ -52,7 +52,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name hex2mem
+ * Name: hex2mem
  *
  * Description:
  *   Read the Intel HEX ASCII data provided on the file descriptor 'fd' and

libc/wchar/lib_wcsnrtombs.c

@@ -51,7 +51,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name:
+ * Name: wcsnrtombs
  *
  * Description:
  *   The 'wcsrtombs' function converts a string of wide characters

net/local/local_sockif.c

@@ -530,7 +530,7 @@ static int local_connect(FAR struct socket *psock,
 }
 
 /****************************************************************************
- * Name: pkt_accept
+ * Name: local_accept
  *
  * Description:
  *   The pkt_accept function is used with connection-based socket types
@@ -799,17 +799,4 @@ static int local_close(FAR struct socket *psock)
  * Public Functions
  ****************************************************************************/
 
-/****************************************************************************
- * Name:
- *
- * Description:
- *
- * Parameters:
- *
- * Returned Value:
- *
- * Assumptions:
- *
- ****************************************************************************/
-
 #endif /* CONFIG_NET_LOCAL */