diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 96d93b609c..4d7871a5b4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -60,7 +60,7 @@ config ARCH_CHIP_A1X select ARCH_HAVE_LOWVECTORS select ARCH_HAVE_FETCHADD select ARCH_HAVE_SDRAM - select BOOT_RUNFROMSDRAM + depends on BOOT_RUNFROMSDRAM select ARCH_HAVE_ADDRENV select ARCH_NEED_ADDRENV_MAPPING ---help--- @@ -74,7 +74,7 @@ config ARCH_CHIP_AM335X select ARCH_HAVE_LOWVECTORS select ARCH_HAVE_FETCHADD select ARCH_HAVE_SDRAM - select BOOT_RUNFROMSDRAM + depends on BOOT_RUNFROMSDRAM select ARCH_HAVE_ADDRENV select ARCH_NEED_ADDRENV_MAPPING ---help--- @@ -144,7 +144,7 @@ config ARCH_CHIP_IMX6 select ARCH_HAVE_LOWVECTORS select ARCH_HAVE_FETCHADD select ARCH_HAVE_SDRAM - select BOOT_RUNFROMSDRAM + depends on BOOT_RUNFROMSDRAM select ARCH_HAVE_ADDRENV select ARCH_NEED_ADDRENV_MAPPING ---help--- @@ -1358,7 +1358,7 @@ if ARCH_CHIP_S32K1XX source "arch/arm/src/s32k1xx/Kconfig" endif if ARCH_CHIP_S32K3XX -source arch/arm/src/s32k3xx/Kconfig +source "arch/arm/src/s32k3xx/Kconfig" endif if ARCH_CHIP_MAX326XX source "arch/arm/src/max326xx/Kconfig" @@ -1415,7 +1415,7 @@ if ARCH_CHIP_STM32U5 source "arch/arm/src/stm32u5/Kconfig" endif if ARCH_CHIP_STM32WB -source arch/arm/src/stm32wb/Kconfig +source "arch/arm/src/stm32wb/Kconfig" endif if ARCH_CHIP_STM32WL5 source "arch/arm/src/stm32wl5/Kconfig" diff --git a/arch/arm/src/efm32/Kconfig b/arch/arm/src/efm32/Kconfig index cb091a2567..ea6838fab8 100644 --- a/arch/arm/src/efm32/Kconfig +++ b/arch/arm/src/efm32/Kconfig @@ -308,14 +308,14 @@ choice config LEUART0_SERIAL_CONSOLE bool "Use LEUART0 as the serial console" depends on EFM32_LEUART0 - select OTHER_SERIAL_CONSOLE + depends on OTHER_SERIAL_CONSOLE ---help--- Use the LEUART0 device as the serial console config LEUART1_SERIAL_CONSOLE bool "Use LEUART1 as the serial console" depends on EFM32_LEUART1 - select OTHER_SERIAL_CONSOLE + depends on OTHER_SERIAL_CONSOLE ---help--- Use the LEUART0 device as the serial console diff --git a/arch/arm/src/imx6/Kconfig b/arch/arm/src/imx6/Kconfig index 5dd9163f9e..ce8b9816b9 100644 --- a/arch/arm/src/imx6/Kconfig +++ b/arch/arm/src/imx6/Kconfig @@ -181,19 +181,19 @@ choice config IMX6_BOOT_OCRAM bool "Running from internal OCRAM" - select BOOT_RUNFROMISRAM + depends on BOOT_RUNFROMISRAM config IMX6_BOOT_SDRAM bool "Running from external SDRAM" - select BOOT_RUNFROMSDRAM + depends on BOOT_RUNFROMSDRAM config IMX6_BOOT_NOR bool "Running from external NOR FLASH" - select BOOT_RUNFROMFLASH + depends on BOOT_RUNFROMFLASH config IMX6_BOOT_SRAM bool "Running from external SRAM" - select BOOT_RUNFROMEXTSRAM + depends on BOOT_RUNFROMEXTSRAM endchoice # i.MX6 Boot Configuration diff --git a/arch/arm/src/imxrt/Kconfig b/arch/arm/src/imxrt/Kconfig index 3f2c5c82c5..8eb7465668 100644 --- a/arch/arm/src/imxrt/Kconfig +++ b/arch/arm/src/imxrt/Kconfig @@ -1776,7 +1776,7 @@ endchoice # i.MX RT Ethernet Interface choice prompt "i.MX RT Ethernet TX Clock Source" - default IMXRT_PROVIDES_TXC + default IMXRT_MAC_PROVIDES_TXC depends on IMXRT_ENET config IMXRT_MAC_PROVIDES_TXC @@ -1892,21 +1892,21 @@ choice config IMXRT_BOOT_OCRAM bool "Running from internal OCRAM" - select BOOT_RUNFROMISRAM + depends on BOOT_RUNFROMISRAM config IMXRT_BOOT_SDRAM bool "Running from external SDRAM" - select BOOT_RUNFROMSDRAM + depends on BOOT_RUNFROMSDRAM depends on IMXRT_SEMC_SDRAM config IMXRT_BOOT_NOR bool "Running from external NOR FLASH" - select BOOT_RUNFROMFLASH + depends on BOOT_RUNFROMFLASH depends on IMXRT_SEMC_NOR config IMXRT_BOOT_SRAM bool "Running from external SRAM" - select BOOT_RUNFROMEXTSRAM + depends on BOOT_RUNFROMEXTSRAM depends on IMXRT_SEMC_SRAM endchoice # i.MX RT Boot Configuration diff --git a/arch/arm/src/nrf52/Kconfig b/arch/arm/src/nrf52/Kconfig index 3604f5d9fc..c193c90858 100644 --- a/arch/arm/src/nrf52/Kconfig +++ b/arch/arm/src/nrf52/Kconfig @@ -664,8 +664,7 @@ menuconfig NRF52_SOFTDEVICE_CONTROLLER select ARMV7M_USEBASEPRI select ARCH_RAMVECTORS select ARCH_IRQPRIO - select NRF52_USE_LFCLK - select NRF52_LFCLK_XTAL + depends on NRF52_LFCLK_XTAL ---help--- This enables use of Nordic SoftDevice controller (SDC). It is a library version of a subset of diff --git a/arch/arm/src/sama5/Kconfig b/arch/arm/src/sama5/Kconfig index ebe96de7ea..07fb9d84a0 100644 --- a/arch/arm/src/sama5/Kconfig +++ b/arch/arm/src/sama5/Kconfig @@ -4415,7 +4415,7 @@ if SAMA5_ADC_PWMTRIG choice prompt "PWM Event Line Selection" - default SAMA5_ADC_PWMTRIG_LINE0 + default SAMA5_ADC_PWM_TRIG_LINE0 config SAMA5_ADC_PWM_TRIG_LINE0 bool "PWM event Line 0" diff --git a/arch/arm/src/stm32/Kconfig b/arch/arm/src/stm32/Kconfig index 2381d25567..214a31ef37 100644 --- a/arch/arm/src/stm32/Kconfig +++ b/arch/arm/src/stm32/Kconfig @@ -2760,7 +2760,7 @@ config STM32_CORDIC bool "CORDIC Accelerator" default n depends on STM32_HAVE_CORDIC - select MATH_CORDIC_USE_Q31 + depends on MATH_CORDIC_USE_Q31 config STM32_BKP bool "BKP" diff --git a/arch/avr/src/avr/Kconfig b/arch/avr/src/avr/Kconfig index fb84ec8a65..17f98c980c 100644 --- a/arch/avr/src/avr/Kconfig +++ b/arch/avr/src/avr/Kconfig @@ -63,7 +63,7 @@ menu "Atmel AVR Toolchain options" config AVR_HAS_MEMX_PTR bool "Enable in-flash static const stings" depends on AVR_ATMEL_AVR_TOOLCHAIN - select ARCH_DEBUG_H + depends on ARCH_DEBUG_H default y ---help--- Enabling this option (recommended) will place all constant diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 375ad907d3..d5248a1765 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -62,9 +62,9 @@ config ARCH_CHIP default "bm3823" if ARCH_CHIP_BM3823 default "s698pm" if ARCH_CHIP_S698PM -source arch/sparc/src/sparc_v8/Kconfig -source arch/sparc/src/bm3803/Kconfig -source arch/sparc/src/bm3823/Kconfig -source arch/sparc/src/s698pm/Kconfig +source "arch/sparc/src/sparc_v8/Kconfig" +source "arch/sparc/src/bm3803/Kconfig" +source "arch/sparc/src/bm3823/Kconfig" +source "arch/sparc/src/s698pm/Kconfig" endif diff --git a/arch/z80/src/ez80/Kconfig b/arch/z80/src/ez80/Kconfig index d962dab1d4..b67ad62f42 100644 --- a/arch/z80/src/ez80/Kconfig +++ b/arch/z80/src/ez80/Kconfig @@ -88,7 +88,7 @@ endchoice # ZDS-II Toolchain version config EZ80_BOOTLOADER bool default n - select BOOT_RUNFROMFLASH + depends on BOOT_RUNFROMFLASH ---help--- Binary image is a bootloader that may require special properties such as re-direction of interrupts (eZ80F92) @@ -96,7 +96,7 @@ config EZ80_BOOTLOADER config EZ80_PROGRAM bool default n - select BOOT_RUNFROMEXTSRAM + depends on BOOT_RUNFROMEXTSRAM ---help--- Binary image is a RAM-resident program loaded by a bootloader and may require special properties such as re-direction of interrupts diff --git a/arch/z80/src/z180/Kconfig b/arch/z80/src/z180/Kconfig index 6363f40a7e..b979a148ef 100644 --- a/arch/z80/src/z180/Kconfig +++ b/arch/z80/src/z180/Kconfig @@ -533,7 +533,7 @@ endmenu choice prompt "Serial console" - default Z180_NO_SERIAL_CONSOLE + default Z180_UART0_SERIAL_CONSOLE depends on DEV_CONSOLE config Z180_UART0_SERIAL_CONSOLE diff --git a/arch/z80/src/z8/Kconfig b/arch/z80/src/z8/Kconfig index 153e23ea6d..8762732b5f 100644 --- a/arch/z80/src/z8/Kconfig +++ b/arch/z80/src/z8/Kconfig @@ -52,7 +52,7 @@ config Z8_TOOLCHAIN_ZDSII choice prompt "ZDS-II Toolchain version" - default EZ80_ZDSII_V522 + default Z8_ZDSII_V522 config Z8_ZDSII_V500 bool "ZDS-II 5.0.0" diff --git a/boards/Kconfig b/boards/Kconfig index d26e5fb1fb..32fb0e1486 100644 --- a/boards/Kconfig +++ b/boards/Kconfig @@ -315,9 +315,7 @@ config ARCH_BOARD_TTGO_T5V2_ESP32 select LCD select LCD_DEV select LCD_FRAMEBUFFER - select LCD_PORTRAIT select LCD_SSD1680 - select LCD_SSD1680_2_90 ---help--- TTGO T5v2 is an ESP32 board with e-ink 2.9 inch display. Display resolution 128/296. More info: @@ -1444,7 +1442,7 @@ config ARCH_BOARD_NUCLEO_F446RE config ARCH_BOARD_STM32G071B_DISCO - bool "STM32G071 STM32G071B-DISO " + bool "STM32G071 STM32G071B-DISO" depends on ARCH_CHIP_STM32G071RB select ARCH_HAVE_LEDS ---help--- @@ -1797,7 +1795,6 @@ config ARCH_BOARD_SAMA5D2_XULT config ARCH_BOARD_GIANT_BOARD bool "Groboards Giant Board (SAMA5D27C-D1G)" depends on ARCH_CHIP_ATSAMA5D27 - select SAMA5D27_GIANT_BOARD_492MHZ select ARCH_HAVE_LEDS ---help--- This options selects support for NuttX on the Groboards Giant Board, diff --git a/boards/arm/gd32f4/gd32f450zk-eval/Kconfig b/boards/arm/gd32f4/gd32f450zk-eval/Kconfig index 99a00d43ab..4254e19e48 100644 --- a/boards/arm/gd32f4/gd32f450zk-eval/Kconfig +++ b/boards/arm/gd32f4/gd32f450zk-eval/Kconfig @@ -36,14 +36,11 @@ config GD32F450ZK_EVAL_CONSOLE_BOARD bool "Eval Com Connector" select GD32_USART0 select USART0_SERIALDRIVER - select USART0_SERIAL_CONSOLE - select GD32F4_FLASH_CONFIG_K config GD32F450ZK_EVAL_CONSOLE_VIRTUAL bool "Virtual Comport" select GD32_USART3 select USART3_SERIALDRIVER - select USART3_SERIAL_CONSOLE config GD32F450ZK_EVAL_CONSOLE_NONE bool "No Console" diff --git a/boards/arm/lpc17xx_40xx/lx_cpu/Kconfig b/boards/arm/lpc17xx_40xx/lx_cpu/Kconfig index 803951f028..4551a88424 100644 --- a/boards/arm/lpc17xx_40xx/lx_cpu/Kconfig +++ b/boards/arm/lpc17xx_40xx/lx_cpu/Kconfig @@ -7,7 +7,7 @@ if ARCH_BOARD_LX_CPU choice prompt "LX_CPU ode and boot memory selection" - default LX_CPU_BOOT_APP + default LX_CPU_BOOT_FLASH_APP depends on ARCH_BOARD_LX_CPU ---help--- Select where NuttX code/text is stored and how it is started. diff --git a/boards/arm/samd5e5/metro-m4/Kconfig b/boards/arm/samd5e5/metro-m4/Kconfig index 5b44bfd4ab..827040875e 100644 --- a/boards/arm/samd5e5/metro-m4/Kconfig +++ b/boards/arm/samd5e5/metro-m4/Kconfig @@ -11,13 +11,13 @@ choice config METRO_M4_RUNFROMFLASH bool "Run from FLASH" - select BOOT_RUNFROMFLASH + depends on BOOT_RUNFROMFLASH ---help--- This is the normal configuration for building METRO M4 code. config METRO_M4_RUNFROMSRAM bool "Run from SRAM" - select BOOT_RUNFROMISRAM + depends on BOOT_RUNFROMISRAM ---help--- During early bring-up, it is safer to execute entirely from SRAM until you are confident in the initialization logic. diff --git a/boards/arm/samd5e5/same54-xplained-pro/Kconfig b/boards/arm/samd5e5/same54-xplained-pro/Kconfig index 524ca37f27..0469b1895e 100644 --- a/boards/arm/samd5e5/same54-xplained-pro/Kconfig +++ b/boards/arm/samd5e5/same54-xplained-pro/Kconfig @@ -11,14 +11,14 @@ choice config SAME54_XPLAINED_PRO_RUNFROMFLASH bool "Run from FLASH" - select BOOT_RUNFROMFLASH + depends on BOOT_RUNFROMFLASH ---help--- This is the normal configuration for building SAM E54 Xplained Pro code. config SAME54_XPLAINED_PRO_RUNFROMSRAM bool "Run from SRAM" - select BOOT_RUNFROMISRAM + depends on BOOT_RUNFROMISRAM ---help--- During early bring-up, it is safer to execute entirely from SRAM until you are confident in the initialization logic. diff --git a/boards/arm/stm32/b-g431b-esc1/Kconfig b/boards/arm/stm32/b-g431b-esc1/Kconfig index cc5e7a44ce..15e61f8abd 100644 --- a/boards/arm/stm32/b-g431b-esc1/Kconfig +++ b/boards/arm/stm32/b-g431b-esc1/Kconfig @@ -7,7 +7,7 @@ if ARCH_BOARD_B_G431B_ESC1 choice prompt "PLL clock source" - default BOARD_STM32_BG431BESC1_HSI + default BOARD_STM32_BG431BESC1_USE_HSI config BOARD_STM32_BG431BESC1_USE_HSI bool "HSI" diff --git a/boards/arm/stm32/nucleo-f429zi/Kconfig b/boards/arm/stm32/nucleo-f429zi/Kconfig index 68ca9af241..2c74ab43bb 100644 --- a/boards/arm/stm32/nucleo-f429zi/Kconfig +++ b/boards/arm/stm32/nucleo-f429zi/Kconfig @@ -36,13 +36,11 @@ config NUCLEO_F429ZI_CONSOLE_ARDUINO bool "Arduino Connector" select STM32_USART6 select USART6_SERIALDRIVER - select USART6_SERIAL_CONSOLE config NUCLEO_F429ZI_CONSOLE_VIRTUAL bool "Virtual Comport" select STM32_USART3 select USART3_SERIALDRIVER - select USART3_SERIAL_CONSOLE config NUCLEO_F429ZI_CONSOLE_NONE bool "No Console" diff --git a/boards/arm/stm32/nucleo-g431rb/Kconfig b/boards/arm/stm32/nucleo-g431rb/Kconfig index 1239f4993d..49f497abd8 100644 --- a/boards/arm/stm32/nucleo-g431rb/Kconfig +++ b/boards/arm/stm32/nucleo-g431rb/Kconfig @@ -7,7 +7,7 @@ if ARCH_BOARD_NUCLEO_G431RB choice prompt "PLL Clock source" - default BOARD_NUCLEO_G431RB_HSI + default BOARD_NUCLEO_G431RB_USE_HSI config BOARD_NUCLEO_G431RB_USE_HSI bool "HSI" diff --git a/boards/arm/stm32f7/nucleo-144/Kconfig b/boards/arm/stm32f7/nucleo-144/Kconfig index 1787f12651..6dd99e8358 100644 --- a/boards/arm/stm32f7/nucleo-144/Kconfig +++ b/boards/arm/stm32f7/nucleo-144/Kconfig @@ -81,25 +81,21 @@ config NUCLEO_CONSOLE_ARDUINO bool "Arduino Connector" select STM32F7_USART6 select USART6_SERIALDRIVER - select USART6_SERIAL_CONSOLE config NUCLEO_CONSOLE_VIRTUAL bool "Virtual Comport" select STM32F7_USART3 select USART3_SERIALDRIVER - select USART3_SERIAL_CONSOLE config NUCLEO_CONSOLE_MORPHO bool "Morpho Connector" select STM32F7_UART8 select UART8_SERIALDRIVER - select UART8_SERIAL_CONSOLE config NUCLEO_CONSOLE_MORPHO_UART4 bool "Morpho Connector UART4" select STM32F7_UART4 select UART4_SERIALDRIVER - select UART4_SERIAL_CONSOLE config NUCLEO_CONSOLE_NONE bool "No Console" diff --git a/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig b/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig index 7c3b3a0367..a3d291d8fe 100644 --- a/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig +++ b/boards/arm/stm32wl5/nucleo-wl55jc/Kconfig @@ -238,7 +238,7 @@ config ARCH_BOARD_FLASH_PART1_FS choice prompt "Filesystem of user partition 1" - default ARCH_BOARD_FLASH_PART1_FS_RAW + default ARCH_BOARD_FLASH_PART1_FS_RAWFS config ARCH_BOARD_FLASH_PART1_FS_RAWFS bool "rawfs" @@ -304,7 +304,7 @@ config ARCH_BOARD_FLASH_PART2_FS choice prompt "Filesystem of user partition 2" - default ARCH_BOARD_FLASH_PART2_FS_RAW + default ARCH_BOARD_FLASH_PART2_FS_RAWFS config ARCH_BOARD_FLASH_PART2_FS_RAWFS bool "rawfs" @@ -347,7 +347,7 @@ config ARCH_BOARD_FLASH_PART3_FS choice prompt "Filesystem of user partition 3" - default ARCH_BOARD_FLASH_PART3_FS_RAW + default ARCH_BOARD_FLASH_PART3_FS_RAWFS config ARCH_BOARD_FLASH_PART3_FS_RAWFS bool "rawfs" @@ -390,7 +390,7 @@ config ARCH_BOARD_FLASH_PART4_FS choice prompt "Filesystem of user partition 4" - default ARCH_BOARD_FLASH_PART4_FS_RAW + default ARCH_BOARD_FLASH_PART4_FS_RAWFS config ARCH_BOARD_FLASH_PART4_FS_RAWFS bool "rawfs" diff --git a/boards/arm/tiva/tm4c1294-launchpad/Kconfig b/boards/arm/tiva/tm4c1294-launchpad/Kconfig index 15584a4f99..8d646582ed 100644 --- a/boards/arm/tiva/tm4c1294-launchpad/Kconfig +++ b/boards/arm/tiva/tm4c1294-launchpad/Kconfig @@ -75,7 +75,7 @@ endif # TIVA_TIMER32_PERIODIC config TM4C1294_LAUNCHPAD_JUMPERS_CAN bool "Use CAN jumpers configuration" default n - select TIVA_UART2 + depends on TIVA_UART2 ---help--- If set, NuttX will assume the jumpers JP4 and JP5 are set in CAN configuration. This means UART2 will be connected to the ICDI serial port. diff --git a/boards/z80/ez80/z20x/Kconfig b/boards/z80/ez80/z20x/Kconfig index 0e396b183a..3277cec34e 100644 --- a/boards/z80/ez80/z20x/Kconfig +++ b/boards/z80/ez80/z20x/Kconfig @@ -21,7 +21,7 @@ config Z20X_SDBOOT config Z20X_W25BOOT bool "W25 boot loader" - select Z20X_W25_CHARDEV + depends on Z20X_W25_CHARDEV select LIBC_HEX2BIN select EZ80_BOOTLOADER depends on EZ80_SPI && MTD_W25 @@ -39,14 +39,14 @@ config Z20X_PROGRAM config Z20X_STANDALONE bool "Standalone FLASH progroam" - select BOOT_RUNFROMFLASH + depends on BOOT_RUNFROMFLASH ---help--- Select this option only to build a small program that executes from z20x FLASH memory. config Z20X_COPYTORAM bool "Copy to RAM" - select BOOT_RUNFROMEXTSRAM + depends on BOOT_RUNFROMEXTSRAM ---help--- This option is available only when running from external SRAM (CONFIG_BOOT_RUNFROMEXTSRAM). In that case there are two possible diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 85625bc67c..f98ea95e24 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -199,7 +199,7 @@ config TTY_LAUNCH_PRIORITY default INIT_PRIORITY config TTY_LAUNCH_STACKSIZE - hex "TTY launch program stack size" + int "TTY launch program stack size" default INIT_STACKSIZE choice diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index 51e3266f36..b5158e85aa 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -7,27 +7,22 @@ menuconfig DRIVERS_VIRTIO bool "Virtio Device Support" depends on !OPENAMP default n - ---help--- if DRIVERS_VIRTIO menuconfig DRIVERS_VIRTIO_MMIO_NUM int "The number of virtio mmio devices" default 1 - ---help--- if DRIVERS_VIRTIO_MMIO_NUM != 0 menuconfig DRIVERS_VIRTIO_MMIO_BASE hex "Virtio-mmio base address" - ---help--- menuconfig DRIVERS_VIRTIO_MMIO_REGSIZE hex "Virtio-mmio register size" default 0 - ---help--- menuconfig DRIVERS_VIRTIO_MMIO_IRQ int "Virtio-mmio irq number" - ---help--- endif @@ -36,13 +31,11 @@ menuconfig DRIVERS_VIRTIO_NET default n depends on DRIVERS_VIRTIO_MMIO_NUM > 0 select ARCH_HAVE_NETDEV_STATISTICS - ---help--- if DRIVERS_VIRTIO_NET config DRIVERS_VIRTIO_NET_QUEUE_LEN int "Queue length" default 16 - ---help--- endif endif diff --git a/libs/libc/machine/Kconfig b/libs/libc/machine/Kconfig index 9822e8c2c0..4d82e57cda 100644 --- a/libs/libc/machine/Kconfig +++ b/libs/libc/machine/Kconfig @@ -206,7 +206,7 @@ source "libs/libc/machine/renesas/Kconfig" endif if ARCH_SPARC -source libs/libc/machine/sparc/Kconfig +source "libs/libc/machine/sparc/Kconfig" endif endmenu # Architecture-Specific Support diff --git a/net/usrsock/Kconfig b/net/usrsock/Kconfig index 6d6745c403..136b053de6 100644 --- a/net/usrsock/Kconfig +++ b/net/usrsock/Kconfig @@ -42,7 +42,6 @@ config NET_USRSOCK_UDP bool "User-space daemon provides UDP sockets" default n select NET_UDP_NO_STACK - ---help--- config NET_USRSOCK_TCP bool "User-space daemon provides TCP sockets"