====================================================================================
Configuration/Tool: spresense/example_camera,CONFIG_ARM_TOOLCHAIN_GNU_EABI
2024-11-12 12:24:37
------------------------------------------------------------------------------------
Cleaning...
Configuring...
Disabling CONFIG_ARM_TOOLCHAIN_GNU_EABI
Enabling CONFIG_ARM_TOOLCHAIN_GNU_EABI
Building NuttX...
mount/fs_automount.c: In function 'automount_initialize':
Error: mount/fs_automount.c:816:7: error: 'return' with no value, in function returning non-void [-Werror=return-type]
816 | return;
| ^~~~~~
In file included from mount/fs_automount.c:43:
/github/workspace/sources/nuttx/include/nuttx/fs/automount.h:176:11: note: declared here
176 | FAR void *automount_initialize(FAR const struct automount_lower_s *lower);
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Example:
When executing "df -h" on Core A to view mount information, this
process will traverse inode nodes, thereby holding the inode_lock.
Since the inode type of the mount point may be rpmsgfs, it will fetch statfs
information from another Core B.
Meanwhile, rcS on Core B needs to obtain file information from Core A,
which will be achieved by fetching stat information through rpmsgfs.
When this message arrives at Core A, a deadlock can occur between Core A's
rptun ap and nsh task.
However, both of these places involve read operations only, thus a reader-writer lock
can be utilized to prevent such a deadlock.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modified the i_crefs from int16_t to atomic_int
2.Modified the i_crefs add, delete, read, and initialize interfaces to atomic operations
The purpose of this change is to avoid deadlock in cross-core scenarios, where A Core blocks B Core’s request for a write operation to A Core when A Core requests a read operation to B Core.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
It seems that RPMSGFS is missed from the list that doesn't need block or
MTD drivers. This attempts to add it.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
we can mount a zipfile in nuttx use mount command like this:
mount -t zipfs -o /data/test.zip /zip
The zipfs is a read only file system,The advantage is that it
does not occupy additional space when reading the decompressed file.
When used, reading and decompression operations are simultaneous.
The known disadvantage is that when using seek to read forward,
it will reopen and cause slow speed problems.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
mount/fs_foreachmountpoint.c: In function 'mountpoint_filter':
mount/fs_foreachmountpoint.c:99:38: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
99 | sprintf(&dirpath[pathlen], "/%s", node->i_name);
| ^
In function 'mountpoint_filter',
inlined from 'mountpoint_filter' at mount/fs_foreachmountpoint.c:64:12:
mount/fs_foreachmountpoint.c:99:7: note: 'sprintf' output between 2 and 257 bytes into a destination of size 256
99 | sprintf(&dirpath[pathlen], "/%s", node->i_name);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
Instead of reporting the failure to find a given FS, nx_mount was
reporting a failure to find the block driver, even when the actual block
driver exists.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
Summary:
- This commit changes the format for df to support big
storage up to 2TB.
Impact:
- None
Testing:
- Tested with spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
