Add support for memory partitioning for OTA updates.
This feature is targeted at the integration of ESP32 boards with RISC-V architecture in conjunction with MCUboot
Signed-off-by: davidiogos <davi.silva@agrosystem.com.br>
fix
CMake Error at boards/arm/stm32f7/nucleo-f746zg/src/CMakeLists.txt:76 (endif):
Flow control statements are not properly nested.
CMake Error at boards/arm/stm32f7/nucleo-f746zg/src/CMakeLists.txt:76 (endif):
Flow control statements are not properly nested.
-- Configuring incomplete, errors occurred!
nucleo-144 combines 3 different ST boards. This approach is inconsistent with
the support for the rest of the nucleo boards, where each board is in separate folders.
Also nucleo-144 is no longer reserved for STM32F7 chips but other families also use this format.
After this commit nucleo-144 is divided into 3 boards:
- nucleo-f746zg
- nucleo-f767zi
- nucleo-f722ze
* Nucleo-L432KC board was missing internal MCU DAC code.
* DAC is now available on PA4/A3 and /dev/dac0 when enabled.
* Updated info on ADC inputs (PA6/A5,PA7/A6) depending on configuration.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
that pr requires chip turn on CONFIG_DRIVERS_BLUETOOTH to use bluetooth,
but not all defconig enable this option, so let's map bt_driver_register
to bt_netdev_register in header file in this case, and revert the unnessary
change in the related chip and board folders.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Implement PIC loading in armv8-m qemu,
for example: load address-independent AP ELF in the bootloader,
and the text segment in AP ELF is XIP,
no need to apply for memory and modify it.
Two config:
bootloader abbreviation bl:
use romfs to load ap elf, use the boot command to parse and jump to ap
application abbreviation ap:
run os test
We need to compile ap first, then compile bl.
compile step:
./tools/configure.sh mps3-an547:ap
make -j20
mkdir -p pic
cp boot pic/.
genromfs -a 128 -f ../romfs.img -d pic
make distclean -j20
./tools/configure.sh mps3-an547:bl
make -j20
run qemu:
qemu-system-arm -M mps3-an547 -m 2G -nographic -kernel nuttx.bin \
-gdb tcp::1127 -device loader,file=../romfs.img,addr=0x60000000
nsh> boot /etc/boot
ap> ostest
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
The segment of the Xen PVH boot protocol was not specified during linking and was placed before .loader.text, causing the boot to fail
Signed-off-by: liwenxiang1 <liwenxiang1@xiaomi.com>
Summary:
1. The start location of FLASH reserves the extended bootloader
2. DTB data is reserved at the start location of RAM
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Signed-off-by: lipengfei28 <lipengfei28@xiaomi.com>
Added a flash driver for the STM32G4 series. The primary change here is
the addition of stm32g4xxx_flash.c. This file uses the STM32L4 flash
driver as a template. The primary difference is the accounting for dual
banks with different page sizes.
Fixed error while building b-g474e-dpow1/buckboost. It was possible (technically) to have page be used uninitialzied. Changing the if statement to default to using a flash_page_size == 2048 fixes this issue.
Avoid compilation errors due to insufficient flash in CI
Configuration/Tool: same70-xplained/mcuboot-loader,CONFIG_ARM_TOOLCHAIN_GNU_EABI
2024-10-14 16:17:34
arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.ramfunc' will not fit in region `flash'
arm-none-eabi-ld: region `flash' overflowed by 52 bytes
arm-none-eabi-ld: warning: /github/workspace/sources/nuttx/nuttx has a LOAD segment with RWX permissions
make[1]: *** [Makefile:212: nuttx] Error 1
make: *** [tools/Unix.mk:551: nuttx] Error 2
make: Target 'all' not remade because of errors.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
/usr/bin/ld: nuttx.rel: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
the detailed warning info:
ccarm: Warning: Unknown option "-Wno-cpp" ignored. Did you mean "--nocpp"?
ccarm: Warning: Unknown option "-pipe" passed to linker
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
