mirror of
https://github.com/apache/nuttx.git
synced 2025-01-13 05:08:41 +08:00
9555f9ff55
For details, please refer to the kernel's introduction to this at "https://docs.kernel.org/arch/arm64/memory-tagging-extension.html" and Android's introduction to this at "https://source.android.com/docs/security/test/memory-safety/arm-mte" Of course, there is also the following detailed principle introduction https://developer.arm.com/-/media/Arm%20Developer%20Community/PDF/Arm_Memory_Tagging_Extension_Whitepaper.pdf The modification of this patch is only to merge the simplest MTE function support. In the future, the MTE function will be integrated into the kernel to a greater extent, for example, hardware MTE Kasan will be supported in the future. Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
95 lines
3.9 KiB
ReStructuredText
95 lines
3.9 KiB
ReStructuredText
====================================
|
||
ATM64 MTE extension
|
||
====================================
|
||
|
||
Introduction
|
||
------------
|
||
|
||
Arm v8.5 introduced the Arm Memory Tagging Extension (MTE),
|
||
a hardware implementation of tagged memory.
|
||
|
||
Basically, MTE tags every memory allocation/deallocation
|
||
with additional metadata. It assigns a tag to a memory location,
|
||
which can then be associated with a pointer that references
|
||
that memory location. At runtime, the CPU checks that the pointer
|
||
and metadata tags match with every load and store.
|
||
|
||
NX OS currently supports deploying MTE on ARM64 QEMU,
|
||
which is supported at the EL1 level of NX OS.
|
||
|
||
Principle
|
||
---------
|
||
|
||
The Arm Memory Tagging Extension implements lock and key access to memory.
|
||
Locks can be set on memory and keys provided during memory access. If the key matches
|
||
the lock, the access is permitted. If it does not match, an error is reported.
|
||
|
||
Memory locations are tagged by adding four bits of metadata to each 16 bytes
|
||
of physical memory. This is the Tag Granule. Tagging memory implements the lock.
|
||
Pointers, and therefore virtual addresses, are modified to contain the key.
|
||
In order to implement the key bits without requiring larger pointers MTE uses the Top Byte
|
||
Ignore (TBI) feature of the Armv8-A Architecture. When TBI is enabled, the top byte of
|
||
a virtual address is ignored when using it as an input for address translation. This allows the
|
||
top byte to store metadata. In MTE four bits of the top byte are used to provide the key
|
||
|
||
Architectural Details
|
||
---------------------
|
||
|
||
MTE adds instructions to the Armv8-A Architecture that are outlined below and grouped
|
||
into three different categories [6]:
|
||
Instructions for tag manipulation applicable to stack and heap tagging.
|
||
|
||
IRG
|
||
In order for the statistical basis of MTE to be valid, a source of random tags is required.
|
||
IRG is defined to provide this in hardware and insert such a tag into a register for use
|
||
by other instructions.
|
||
|
||
GMI
|
||
This instruction is for manipulating the excluded set of tags for use with the IRG instruction.
|
||
This is intended for cases where software uses specific tag values for special purposes
|
||
while retaining random tag behavior for normal allocations.
|
||
|
||
LDG, STG, and STZG
|
||
These instructions allow getting or setting tags in memory. They are intended for changing
|
||
tags in memory either without modifying the data or zeroing the data.
|
||
|
||
ST2G and STZ2G
|
||
These are denser alternatives to STG and STZG which operate on two granules of memory
|
||
when allocation size allows them to be used.
|
||
|
||
STGP
|
||
This instruction stores both tag and data to memory.
|
||
Instructions Intended for pointer arithmetic and stack tagging:
|
||
|
||
ADDG and SUBG
|
||
These are variants of the ADD and SUB instructions, intended for arithmetic on addresses.
|
||
They allow both the tag and address to be separately modified by an immediate value.
|
||
These instructions are intended for creating the addresses of objects on the stack.
|
||
|
||
SUBP(S)
|
||
This instruction provides a 56-bit subtract with optional flag setting which is required
|
||
for pointer arithmetic that ignores the tag in the top byte.
|
||
|
||
Instructions intended for system use:
|
||
LDGM, STGM, and STZGM
|
||
These are bulk tag manipulation instructions which are UNDEFINED at EL0. These are
|
||
intended for system software to manipulate tags for the purposes of initialization and
|
||
serialization. For example, they can be used to implement swapping of tagged memory
|
||
to a medium which is not tag-aware. The zeroing form can be used for efficient
|
||
initialization of memory.
|
||
|
||
Currently NX OS supports the execution of the above instructions,
|
||
such as irg, ldg, stg instructions.
|
||
Their test programs are stored in "apps/system/mte" to test whether the current system supports
|
||
|
||
Usage
|
||
-----
|
||
|
||
If you want to experience the MTE function of NX OS, you can refer to the following：
|
||
To enable ARM64_MTE, configure the kernel with::
|
||
|
||
CONFIG_ARM64_MTE=y
|
||
|
||
Of course you can also run it with the existing configuration：
|
||
|
||
boards/arm64/qemu/qemu-armv8a/configs/mte
|