configs/pic32mx7mmb/nsh converted to use the kconfig-frontends tools
This commit is contained in:
Gregory Nutt
parent
6fe0ef64f7
commit
0914aa7a77
4 changed files with 1045 additions and 930 deletions
|
|
@ -482,7 +482,7 @@ config ARCH_BOARD_PIC32_STARTERKIT
|
||||||
(DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
(DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
||||||
See www.microchip.com for further information.
|
See www.microchip.com for further information.
|
||||||
|
|
||||||
config ARCH_BOARD_PIC32_PIC32MX7MMB
|
config ARCH_BOARD_PIC32MX7MMB
|
||||||
bool "Mikroelektronika PIC32MX7 MMB"
|
bool "Mikroelektronika PIC32MX7 MMB"
|
||||||
depends on ARCH_CHIP_PIC32MX795F512L
|
depends on ARCH_CHIP_PIC32MX795F512L
|
||||||
select ARCH_HAVE_LEDS
|
select ARCH_HAVE_LEDS
|
||||||
|
|
@ -930,7 +930,7 @@ config ARCH_BOARD
|
||||||
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
||||||
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
|
default "pcduino-a10" if ARCH_BOARD_PCDUINO_A10
|
||||||
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
||||||
default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB
|
default "pic32mx7mmb" if ARCH_BOARD_PIC32MX7MMB
|
||||||
default "pirelli_dpl10" if ARCH_BOARD_PIRELLI_DPL10
|
default "pirelli_dpl10" if ARCH_BOARD_PIRELLI_DPL10
|
||||||
default "pjrc-8051" if ARCH_BOARD_PJRC_87C52
|
default "pjrc-8051" if ARCH_BOARD_PJRC_87C52
|
||||||
default "px4fmu-v2_upstream" if ARCH_BOARD_PX4FMU_V2
|
default "px4fmu-v2_upstream" if ARCH_BOARD_PX4FMU_V2
|
||||||
|
|
@ -1164,7 +1164,7 @@ endif
|
||||||
if ARCH_BOARD_PIC32_STARTERKIT
|
if ARCH_BOARD_PIC32_STARTERKIT
|
||||||
source "configs/pic32-starterkit/Kconfig"
|
source "configs/pic32-starterkit/Kconfig"
|
||||||
endif
|
endif
|
||||||
if ARCH_BOARD_PIC32_PIC32MX7MMB
|
if ARCH_BOARD_PIC32MX7MMB
|
||||||
source "configs/pic32mx7mmb/Kconfig"
|
source "configs/pic32mx7mmb/Kconfig"
|
||||||
endif
|
endif
|
||||||
if ARCH_BOARD_PIRELLI_DPL10
|
if ARCH_BOARD_PIRELLI_DPL10
|
||||||
|
|
|
||||||
|
|
@ -610,215 +610,209 @@ selected as follow:
|
||||||
Where <subdir> is one of the following:
|
Where <subdir> is one of the following:
|
||||||
|
|
||||||
nsh:
|
nsh:
|
||||||
====
|
|
||||||
Description.
|
|
||||||
------------
|
|
||||||
This is the NuttShell (NSH) using the NSH startup logic at
|
This is the NuttShell (NSH) using the NSH startup logic at
|
||||||
apps/examples/nsh.
|
apps/examples/nsh.
|
||||||
|
|
||||||
Serial Output.
|
|
||||||
--------------
|
|
||||||
The OS test produces all of its test output on the serial console.
|
|
||||||
This configuration has UART1 enabled as a serial console.
|
|
||||||
|
|
||||||
SD Card Support
|
|
||||||
---------------
|
|
||||||
SD card support is built into this example by default:
|
|
||||||
|
|
||||||
CONFIG_PIC32MX_SPI1=y
|
|
||||||
CONFIG_NSH_ARCHINIT=y
|
|
||||||
|
|
||||||
The SD card can be mounted from the NSH command line as follows:
|
|
||||||
|
|
||||||
nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard
|
|
||||||
nsh> ls -l /mnt/sdcard
|
|
||||||
/mnt/sdcard:
|
|
||||||
-rw-rw-rw- 16 ATEST.TXT
|
|
||||||
-rw-rw-rw- 21170 TODO
|
|
||||||
-rw-rw-rw- 22 ANOTHER.TXT
|
|
||||||
-rw-rw-rw- 22 HI2148.TXT
|
|
||||||
-rw-rw-rw- 16 HiFromNotePad.txt
|
|
||||||
|
|
||||||
USB Configurations.
|
|
||||||
------------------
|
|
||||||
USB device support is enabled by default in this configuration.
|
|
||||||
The following settings are defined by default (and can be set
|
|
||||||
to 'n' to disabled USB device support).
|
|
||||||
|
|
||||||
CONFIG_USBDEV=y : Enable basic USB device support
|
|
||||||
CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
|
|
||||||
CONFIG_USBMSC=y : USB supports a mass storage device.
|
|
||||||
|
|
||||||
In this configuration, NSH will support the following commands:
|
|
||||||
|
|
||||||
msconn : Connect the mass storage device, exportint the SD
|
|
||||||
card as the USB mass storage logical unit.
|
|
||||||
msdis : Disconnect the USB mass storage device
|
|
||||||
|
|
||||||
NOTE: The SD card should *not* be mounted under NSH *and* exported
|
|
||||||
by the mass storage device!!! That can result in corruption of the
|
|
||||||
SD card format. This is the sequence of commands that you should
|
|
||||||
use to work with the SD card safely:
|
|
||||||
|
|
||||||
mount -t vfat /dev/mmcsd0 /mnt/sdcard : Mount the SD card initially
|
|
||||||
...
|
|
||||||
umount /mnt/sdcard : Unmount the SD card before connecting
|
|
||||||
msconn : Connect the USB MSC
|
|
||||||
...
|
|
||||||
msdis : Disconnect the USB MSC
|
|
||||||
mount -t vfat /dev/mmcsd0 /mnt/sdcard : Re-mount the SD card
|
|
||||||
...
|
|
||||||
|
|
||||||
Other USB other device configurations can be enabled and
|
|
||||||
included as NSH built-in built in functions.
|
|
||||||
|
|
||||||
examples/usbterm - This option can be enabled by uncommenting
|
|
||||||
the following line in the appconfig file:
|
|
||||||
|
|
||||||
CONFIGURED_APPS += examples/usbterm
|
|
||||||
|
|
||||||
And by enabling one of the USB serial devices:
|
|
||||||
|
|
||||||
CONFIG_USBMSC=n : Disable USB mass storage device.
|
|
||||||
CONFIG_PL2303=y : Enable the Prolifics PL2303 emulation
|
|
||||||
CONFIG_CDCACM=y : or the CDC/ACM serial driver (not both)
|
|
||||||
|
|
||||||
system/cdcacm - The system/cdcacm program can be included as an
|
|
||||||
function by uncommenting the following line in the appconfig file:
|
|
||||||
|
|
||||||
CONFIGURED_APPS += system/cdcacm
|
|
||||||
|
|
||||||
and defining the following in your .config file:
|
|
||||||
|
|
||||||
CONFIG_USBMSC=n : Disable USB mass storage device.
|
|
||||||
CONFIG_CDCACM=y : Enable the CDCACM device
|
|
||||||
|
|
||||||
Networking Configurations.
|
|
||||||
--------------------------
|
|
||||||
Networking is enabled by default in this configuration:
|
|
||||||
|
|
||||||
CONFIG_NET=y : Enable networking support
|
|
||||||
CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver
|
|
||||||
CONFIG_NSH_TELNET=y : Enable the Telnet NSH console (optional)
|
|
||||||
|
|
||||||
The default configuration has:
|
|
||||||
|
|
||||||
CONFIG_NSH_DHCPC=n : DHCP is disabled
|
|
||||||
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) : Target IP address 10.0.0.2
|
|
||||||
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
|
|
||||||
|
|
||||||
This will probably need to be customized for your network.
|
|
||||||
|
|
||||||
NOTES:
|
NOTES:
|
||||||
1. This logic will assume that a network is connected. During its
|
|
||||||
initialization, it will try to negotiate the link speed. If you have
|
|
||||||
no network connected when you reset the board, there will be a long
|
|
||||||
delay (maybe 30 seconds?) before anything happens. That is the timeout
|
|
||||||
before the networking finally gives up and decides that no network is
|
|
||||||
available.
|
|
||||||
|
|
||||||
2. This example can support an FTP client. In order to build in FTP client
|
1. This configuration uses the mconf-based configuration tool. To
|
||||||
support simply uncomment the following lines in the appconfig file (before
|
change this configurations using that tool, you should:
|
||||||
configuring) or in the apps/.config file (after configuring):
|
|
||||||
|
|
||||||
#CONFIGURED_APPS += netutils/ftpc
|
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||||
#CONFIGURED_APPS += examples/ftpc
|
and misc/tools/
|
||||||
|
|
||||||
3. This example can support an FTP server. In order to build in FTP server
|
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||||
support simply uncomment the following lines in the appconfig file (before
|
reconfiguration process.
|
||||||
configuring) or in the apps/.config file (after configuring):
|
|
||||||
|
|
||||||
#CONFIGURED_APPS += netutils/ftpd
|
2. Serial Output
|
||||||
#CONFIGURED_APPS += examples/ftpd
|
|
||||||
|
|
||||||
And enable poll() support in the NuttX configuration file:
|
The OS test produces all of its test output on the serial console.
|
||||||
|
This configuration has UART1 enabled as a serial console.
|
||||||
|
|
||||||
CONFIG_DISABLE_POLL=n
|
3. SD Card Support
|
||||||
|
|
||||||
Using a RAM disk and the USB MSC device to the nsh configuration
|
SD card support is built into this example by default:
|
||||||
----------------------------------------------------------------
|
|
||||||
Here is an experimental change to examples/nsh that will create a RAM
|
|
||||||
disk and attempt to export that RAM disk as a USB mass storage device.
|
|
||||||
|
|
||||||
1. Changes to nuttx/.config
|
|
||||||
|
|
||||||
a) Enable support for the PIC32 USB device
|
|
||||||
|
|
||||||
-CONFIG_PIC32MX_USBDEV=n
|
|
||||||
+CONFIG_PIC32MX_USBDEV=y
|
|
||||||
|
|
||||||
b) Enable NuttX USB device support
|
|
||||||
|
|
||||||
-CONFIG_USBDEV=n
|
|
||||||
+CONFIG_USBDEV=y
|
|
||||||
|
|
||||||
c) Enable the USB MSC class driver
|
|
||||||
|
|
||||||
-CONFIG_USBMSC=n
|
|
||||||
+CONFIG_USBMSC=y
|
|
||||||
|
|
||||||
d) Use a RAM disk (instead of an SD card) as the USB MSC logical unit:
|
|
||||||
|
|
||||||
-CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
|
|
||||||
+CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/ram0"
|
|
||||||
|
|
||||||
2. Changes to nuttx/.config.
|
|
||||||
|
|
||||||
a) Enable building of the system/usbmsc:
|
|
||||||
|
|
||||||
-# CONFIGURED_APPS += system/usbmsc
|
|
||||||
+ CONFIGURED_APPS += system/usbmsc
|
|
||||||
|
|
||||||
3. When NSH first comes up, you must manually create the RAM disk
|
|
||||||
before exporting it:
|
|
||||||
|
|
||||||
a) Create a 64Kb RAM disk at /dev/ram0:
|
|
||||||
|
|
||||||
nsh> mkrd -s 512 128
|
|
||||||
|
|
||||||
b) Put a FAT file system on the RAM disk:
|
|
||||||
|
|
||||||
nsh> mkfatfs /dev/ram0
|
CONFIG_PIC32MX_SPI1=y
|
||||||
|
CONFIG_NSH_ARCHINIT=y
|
||||||
|
|
||||||
b) Now the 'msconn' command will connect to the host and
|
The SD card can be mounted from the NSH command line as follows:
|
||||||
export /dev/ram0 as the USB logical unit:
|
|
||||||
|
|
||||||
nsh> msconn
|
nsh> mount -t vfat /dev/mmcsd0 /mnt/sdcard
|
||||||
|
nsh> ls -l /mnt/sdcard
|
||||||
|
/mnt/sdcard:
|
||||||
|
-rw-rw-rw- 16 ATEST.TXT
|
||||||
|
-rw-rw-rw- 21170 TODO
|
||||||
|
-rw-rw-rw- 22 ANOTHER.TXT
|
||||||
|
-rw-rw-rw- 22 HI2148.TXT
|
||||||
|
-rw-rw-rw- 16 HiFromNotePad.txt
|
||||||
|
|
||||||
NOTE: This modification should be considered experimental. IN the
|
4. USB Configurations
|
||||||
little testing I have done with it, it appears functional. But the
|
|
||||||
logic has not been stressed and there could still be lurking issues.
|
|
||||||
(There is a bug associated with this configuration listed in the
|
|
||||||
top-level TODO list).
|
|
||||||
|
|
||||||
Adding LCD and graphics support to the nsh configuration:
|
USB device support is enabled by default in this configuration.
|
||||||
--------------------------------------------------------
|
The following settings are defined by default (and can be set
|
||||||
|
to 'n' to disabled USB device support).
|
||||||
LCD support is already enabled in defconfig (nuttx/.config):
|
|
||||||
|
|
||||||
CONFIG_NX=y : Enable graphics suppport
|
|
||||||
CONFIG_PIC32MX_PMP=y : Enable parallel port support
|
|
||||||
CONFIG_LCD_MIO283QT2=y : MIO283QT2 LCD support
|
|
||||||
|
|
||||||
But you will have to enable a specific graphics example application
|
|
||||||
in order to see anything.
|
|
||||||
|
|
||||||
appconfig (apps/.config): Enable the application configurations that you
|
CONFIG_USBDEV=y : Enable basic USB device support
|
||||||
want to use. Asexamples:
|
CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
|
||||||
|
CONFIG_USBMSC=y : USB supports a mass storage device.
|
||||||
|
|
||||||
CONFIGURED_APPS += examples/nx : Pick one or more
|
In this configuration, NSH will support the following commands:
|
||||||
CONFIGURED_APPS += examples/nxhello :
|
|
||||||
CONFIGURED_APPS += examples/nximage :
|
|
||||||
CONFIGURED_APPS += examples/nxlines :
|
|
||||||
|
|
||||||
Enabling touch screen support in the nsh configuaration
|
msconn : Connect the mass storage device, exportint the SD
|
||||||
-------------------------------------------------------
|
card as the USB mass storage logical unit.
|
||||||
|
msdis : Disconnect the USB mass storage device
|
||||||
|
|
||||||
|
NOTE: The SD card should *not* be mounted under NSH *and* exported
|
||||||
|
by the mass storage device!!! That can result in corruption of the
|
||||||
|
SD card format. This is the sequence of commands that you should
|
||||||
|
use to work with the SD card safely:
|
||||||
|
|
||||||
In defconfig (or nuttx/.config), set:
|
mount -t vfat /dev/mmcsd0 /mnt/sdcard : Mount the SD card initially
|
||||||
|
...
|
||||||
|
umount /mnt/sdcard : Unmount the SD card before connecting
|
||||||
|
msconn : Connect the USB MSC
|
||||||
|
...
|
||||||
|
msdis : Disconnect the USB MSC
|
||||||
|
mount -t vfat /dev/mmcsd0 /mnt/sdcard : Re-mount the SD card
|
||||||
|
...
|
||||||
|
|
||||||
|
Other USB other device configurations can be enabled and
|
||||||
|
included as NSH built-in built in functions.
|
||||||
|
|
||||||
CONFIG_INPUT=y : Enable input device support
|
examples/usbterm - This option can be enabled by adding the
|
||||||
CONFIG_SCHED_WORKQUEUE=y : Work queue support needed
|
following to the NuttX configuration file:
|
||||||
|
|
||||||
In appconfig (or apps/.config), uncomment:
|
CONFIG_EXAMPLES_USBTERM=y
|
||||||
|
|
||||||
CONFIGURED_APPS += examples/touchscreen
|
And by enabling one of the USB serial devices:
|
||||||
|
|
||||||
|
CONFIG_USBMSC=n : Disable USB mass storage device.
|
||||||
|
CONFIG_PL2303=y : Enable the Prolifics PL2303 emulation
|
||||||
|
CONFIG_CDCACM=y : or the CDC/ACM serial driver (not both)
|
||||||
|
|
||||||
|
system/cdcacm - The system/cdcacm program can be included as an
|
||||||
|
function by adding the following to the NuttX configuration file:
|
||||||
|
|
||||||
|
CONFIG_SYSTEM_CDCACM=y
|
||||||
|
|
||||||
|
and defining the following in your .config file:
|
||||||
|
|
||||||
|
CONFIG_USBMSC=n : Disable USB mass storage device.
|
||||||
|
CONFIG_CDCACM=y : Enable the CDCACM device
|
||||||
|
|
||||||
|
5. Networking Configurations
|
||||||
|
|
||||||
|
Networking is enabled by default in this configuration:
|
||||||
|
|
||||||
|
CONFIG_NET=y : Enable networking support
|
||||||
|
CONFIG_PIC32MX_ETHERNET=y : Enable the PIC32 Ethernet driver
|
||||||
|
CONFIG_NSH_TELNET=y : Enable the Telnet NSH console (optional)
|
||||||
|
|
||||||
|
The default configuration has:
|
||||||
|
|
||||||
|
CONFIG_NSH_DHCPC=n : DHCP is disabled
|
||||||
|
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) : Target IP address 10.0.0.2
|
||||||
|
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) : Host IP address 10.0.0.1
|
||||||
|
|
||||||
|
This will probably need to be customized for your network.
|
||||||
|
|
||||||
|
NOTES:
|
||||||
|
|
||||||
|
a. This logic will assume that a network is connected. During its
|
||||||
|
initialization, it will try to negotiate the link speed. If you have
|
||||||
|
no network connected when you reset the board, there will be a long
|
||||||
|
delay (maybe 30 seconds?) before anything happens. That is the timeout
|
||||||
|
before the networking finally gives up and decides that no network is
|
||||||
|
available.
|
||||||
|
|
||||||
|
b. This example can support an FTP client. In order to build in FTP client
|
||||||
|
support simply add the following to the NuttX configuration file:
|
||||||
|
|
||||||
|
CONFIG_NETUTILS_FTPC=y
|
||||||
|
CONFIG_EXAMPLES_FTPC=y
|
||||||
|
|
||||||
|
3. This example can support an FTP server. In order to build in FTP server
|
||||||
|
support simply add the following to the NuttX configuration file:
|
||||||
|
|
||||||
|
CONFIG_NETUTILS_FTPD=y
|
||||||
|
CONFIG_SYSTEM_FTPD=y
|
||||||
|
|
||||||
|
And enable poll() support in the NuttX configuration file:
|
||||||
|
|
||||||
|
CONFIG_DISABLE_POLL=n
|
||||||
|
|
||||||
|
6. Using a RAM disk and the USB MSC device to the nsh configuration
|
||||||
|
|
||||||
|
Here is an experimental change to examples/nsh that will create a RAM
|
||||||
|
disk and attempt to export that RAM disk as a USB mass storage device.
|
||||||
|
|
||||||
|
1. Changes to nuttx/.config
|
||||||
|
|
||||||
|
a) Enable support for the PIC32 USB device
|
||||||
|
|
||||||
|
-CONFIG_PIC32MX_USBDEV=n
|
||||||
|
+CONFIG_PIC32MX_USBDEV=y
|
||||||
|
|
||||||
|
b) Enable NuttX USB device support
|
||||||
|
|
||||||
|
-CONFIG_USBDEV=n
|
||||||
|
+CONFIG_USBDEV=y
|
||||||
|
|
||||||
|
c) Enable the USB MSC class driver
|
||||||
|
|
||||||
|
-CONFIG_USBMSC=n
|
||||||
|
+CONFIG_USBMSC=y
|
||||||
|
|
||||||
|
d) Use a RAM disk (instead of an SD card) as the USB MSC logical unit:
|
||||||
|
|
||||||
|
-CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
|
||||||
|
+CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/ram0"
|
||||||
|
|
||||||
|
2. Changes to nuttx/.config.
|
||||||
|
|
||||||
|
a) Enable building of the system/usbmsc:
|
||||||
|
|
||||||
|
CONFIG_SYSTEM_USBMSC=y
|
||||||
|
|
||||||
|
3. When NSH first comes up, you must manually create the RAM disk
|
||||||
|
before exporting it:
|
||||||
|
|
||||||
|
a) Create a 64Kb RAM disk at /dev/ram0:
|
||||||
|
|
||||||
|
nsh> mkrd -s 512 128
|
||||||
|
|
||||||
|
b) Put a FAT file system on the RAM disk:
|
||||||
|
|
||||||
|
nsh> mkfatfs /dev/ram0
|
||||||
|
|
||||||
|
b) Now the 'msconn' command will connect to the host and
|
||||||
|
export /dev/ram0 as the USB logical unit:
|
||||||
|
|
||||||
|
nsh> msconn
|
||||||
|
|
||||||
|
NOTE: This modification should be considered experimental. IN the
|
||||||
|
little testing I have done with it, it appears functional. But the
|
||||||
|
logic has not been stressed and there could still be lurking issues.
|
||||||
|
(There is a bug associated with this configuration listed in the
|
||||||
|
top-level TODO list).
|
||||||
|
|
||||||
|
7. Adding LCD and graphics support to the nsh configuration
|
||||||
|
|
||||||
|
LCD support is already enabled in defconfig (nuttx/.config):
|
||||||
|
|
||||||
|
CONFIG_NX=y : Enable graphics suppport
|
||||||
|
CONFIG_PIC32MX_PMP=y : Enable parallel port support
|
||||||
|
CONFIG_LCD_MIO283QT2=y : MIO283QT2 LCD support
|
||||||
|
|
||||||
|
But you will have to enable a specific graphics example application
|
||||||
|
in the NuttX configuration file in order to see anything.
|
||||||
|
|
||||||
|
8. Enabling touch screen support in the nsh configuaration
|
||||||
|
|
||||||
|
In defconfig (or nuttx/.config), set:
|
||||||
|
|
||||||
|
CONFIG_INPUT=y : Enable input device support
|
||||||
|
CONFIG_SCHED_WORKQUEUE=y : Work queue support needed
|
||||||
|
CONFIG_EXAMPLES_TOUCHSCREEN=y : Touchscreen example code
|
||||||
|
|
|
||||||
|
|
@ -1,132 +0,0 @@
|
||||||
############################################################################
|
|
||||||
# configs/pic32mx7mmb/nsh/appconfig
|
|
||||||
#
|
|
||||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
|
||||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
|
||||||
#
|
|
||||||
# Redistribution and use in source and binary forms, with or without
|
|
||||||
# modification, are permitted provided that the following conditions
|
|
||||||
# are met:
|
|
||||||
#
|
|
||||||
# 1. Redistributions of source code must retain the above copyright
|
|
||||||
# notice, this list of conditions and the following disclaimer.
|
|
||||||
# 2. Redistributions in binary form must reproduce the above copyright
|
|
||||||
# notice, this list of conditions and the following disclaimer in
|
|
||||||
# the documentation and/or other materials provided with the
|
|
||||||
# distribution.
|
|
||||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
|
||||||
# used to endorse or promote products derived from this software
|
|
||||||
# without specific prior written permission.
|
|
||||||
#
|
|
||||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
||||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
||||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
||||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
||||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
||||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
||||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
|
||||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
||||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
||||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
|
||||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
||||||
# POSSIBILITY OF SUCH DAMAGE.
|
|
||||||
#
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
############################################################################
|
|
||||||
# Path to example in apps/examples containing the user_start entry point
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
CONFIGURED_APPS += examples/nsh
|
|
||||||
|
|
||||||
############################################################################
|
|
||||||
# The NSH application library
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
CONFIGURED_APPS += system/readline
|
|
||||||
CONFIGURED_APPS += nshlib
|
|
||||||
|
|
||||||
############################################################################
|
|
||||||
# USB device configurations
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_PIC32MX_USBDEV),y)
|
|
||||||
|
|
||||||
# USB Mass Storage Class device configurations
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_USBMSC),y)
|
|
||||||
CONFIGURED_APPS += system/usbmsc
|
|
||||||
else
|
|
||||||
|
|
||||||
# USB CDC/ACM serial device configurations
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_CDCACM),y)
|
|
||||||
# Comment out to enable the examples/usbterm built-in
|
|
||||||
CONFIGURED_APPS += system/cdcacm
|
|
||||||
# Uncomment the following to enable the examples/usbterm built-in
|
|
||||||
# CONFIGURED_APPS += examples/usbterm
|
|
||||||
else
|
|
||||||
|
|
||||||
# Prolifics PL2303 emulation configurations
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_PL2303),y)
|
|
||||||
# Uncomment the following to enable the examples/usbterm built-in
|
|
||||||
# CONFIGURED_APPS += examples/usbterm
|
|
||||||
endif # CONFIG_PL2303
|
|
||||||
endif # CONFIG_CDCACM
|
|
||||||
endif # CONFIG_USBMSC
|
|
||||||
endif # CONFIG_PIC32MX_USBDEV
|
|
||||||
|
|
||||||
############################################################################
|
|
||||||
# Networking configurations
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
# Networking libraries.
|
|
||||||
# Uncomment netutils/ftpc to include an FTP client library
|
|
||||||
# Uncomment netutils/ftpd to include an FTP server library
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_NET),y)
|
|
||||||
CONFIGURED_APPS += netutils/uiplib
|
|
||||||
CONFIGURED_APPS += netutils/resolv
|
|
||||||
CONFIGURED_APPS += netutils/webclient
|
|
||||||
CONFIGURED_APPS += netutils/tftpc
|
|
||||||
#CONFIGURED_APPS += netutils/ftpc
|
|
||||||
#CONFIGURED_APPS += netutils/ftpd
|
|
||||||
ifeq ($(CONFIG_NSH_TELNET),y)
|
|
||||||
CONFIGURED_APPS += netutils/telnetd
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
# Networking applications configured as an NX built-in commands
|
|
||||||
# Uncomment examples/ftpc to include the FTP client example
|
|
||||||
# Uncomment examples/ftpd to include the FTP daemon example
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_NET),y)
|
|
||||||
#CONFIGURED_APPS += examples/ftpc
|
|
||||||
#CONFIGURED_APPS += examples/ftpd
|
|
||||||
endif
|
|
||||||
|
|
||||||
############################################################################
|
|
||||||
# Other Applications that can be configured as an NX built-in commands
|
|
||||||
############################################################################
|
|
||||||
|
|
||||||
# The I2C tool
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_I2C),y)
|
|
||||||
CONFIGURED_APPS += system/i2c
|
|
||||||
endif
|
|
||||||
|
|
||||||
# Uncomment to select a graphics example
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_NX),y)
|
|
||||||
#CONFIGURED_APPS += examples/nx
|
|
||||||
#CONFIGURED_APPS += examples/nxhello
|
|
||||||
#CONFIGURED_APPS += examples/nximage
|
|
||||||
#CONFIGURED_APPS += examples/nxlines
|
|
||||||
endif
|
|
||||||
|
|
||||||
# Uncomment to enable the touchscreen test
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_INPUT),y)
|
|
||||||
#CONFIGURED_APPS += examples/touchscreen
|
|
||||||
endif
|
|
||||||
File diff suppressed because it is too large
Load diff
Loading…
Reference in a new issue