First step at porting to MoteinoMEGA. LED shows assert failure at boot. Appears to be short double blink, short off (~1sec), followed by 250ms toggle cycles. Most of it derived from amber board.
This commit is contained in:
jeditekunum
parent
ca31cf4608
commit
2103ca967a
17 changed files with 3060 additions and 0 deletions
|
|
@ -318,6 +318,15 @@ config ARCH_BOARD_MICROPENDOUS3
|
|||
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
|
||||
Support is configured for the AT90USB647.
|
||||
|
||||
config ARCH_BOARD_MOTEINO_MEGA
|
||||
bool "LowPowerLab MoteinoMEGA"
|
||||
depends on ARCH_CHIP_ATMEGA1284P
|
||||
select ARCH_HAVE_LEDS
|
||||
---help---
|
||||
This is placeholder for the LowPowerLab MoteinoMEGA that is based
|
||||
on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is
|
||||
there is untested due to tool-related issues.
|
||||
|
||||
config ARCH_BOARD_MX1ADS
|
||||
bool "Motorola MX1ADS development board"
|
||||
depends on ARCH_CHIP_IMX1
|
||||
|
|
@ -1065,6 +1074,7 @@ config ARCH_BOARD
|
|||
default "mcu123-lpc214x" if ARCH_BOARD_MCU123_LPC214X
|
||||
default "micropendous3" if ARCH_BOARD_MICROPENDOUS3
|
||||
default "mirtoo" if ARCH_BOARD_MIRTOO
|
||||
default "moteino-mega" if ARCH_BOARD_MOTEINO_MEGA
|
||||
default "mx1ads" if ARCH_BOARD_MX1ADS
|
||||
default "ne64badge" if ARCH_BOARD_NE64BADGE
|
||||
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320
|
||||
|
|
@ -1288,6 +1298,9 @@ endif
|
|||
if ARCH_BOARD_MIRTOO
|
||||
source "configs/mirtoo/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_MOTEINO_MEGA
|
||||
source "configs/moteino-mega/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_MX1ADS
|
||||
source "configs/mx1ads/Kconfig"
|
||||
endif
|
||||
|
|
|
|||
4
configs/moteino-mega/Kconfig
Normal file
4
configs/moteino-mega/Kconfig
Normal file
|
|
@ -0,0 +1,4 @@
|
|||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
491
configs/moteino-mega/README.txt
Normal file
491
configs/moteino-mega/README.txt
Normal file
|
|
@ -0,0 +1,491 @@
|
|||
README
|
||||
^^^^^^
|
||||
|
||||
**********************************************************************
|
||||
**** PRELIMINARY - Port in progress ****
|
||||
**********************************************************************
|
||||
|
||||
This is the README file for the port of NuttX to the MoteinoMEGA from
|
||||
LowPowerLab (http://www.lowpowerlab.com). The MoteinoMEGA is based
|
||||
on an Atmel ATMega1284P. As of this writing, documentation for the
|
||||
MoteinoMEGA board is available here:
|
||||
|
||||
https://lowpowerlab.com/shop/index.php?_route_=Moteino/moteinomega
|
||||
|
||||
Contents
|
||||
^^^^^^^^
|
||||
|
||||
o MoteinoMEGA Features
|
||||
o Pin Connections
|
||||
o DualOptiboot Bootloader
|
||||
o Toolchains
|
||||
o Windows Native Toolchains
|
||||
o NuttX buildroot Toolchain
|
||||
o avr-libc
|
||||
o MoteinoMEGA Configuration Options
|
||||
o Configurations
|
||||
|
||||
MoteinoMEGA Features
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
o 16MHz ATmega1284P Atmel 8bit AVR RISC Processor
|
||||
o 128Kbyte Flash
|
||||
o 16Kbyte RAM
|
||||
o 4Kbyte EEPROM
|
||||
o 2 High Speed Serial Ports
|
||||
o 8Ch 10bit Analog Input port
|
||||
|
||||
Pin Connections (PCB Rev ?)
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
-------------------- -----------------------------
|
||||
ATMega1284P Pinout MoteinoMEGA board connection
|
||||
-------------------- -----------------------------
|
||||
**********************************************************************
|
||||
**** INVALID - Port in progress ****
|
||||
**********************************************************************
|
||||
(left)
|
||||
1 PEN Pulled-up
|
||||
2 PE0 (RXD0/PDI) MAX202ECWED T1IN or J7-1, ISP-PDI (via 74HC5053), J5-26
|
||||
3 PE1 (TXD0/PDO) MAX202ECWED A1OUT or J7-9, ISP-PDO (via 74HC5053), J5-25
|
||||
4 PE2 (XCK0/AIN0) MAX202ECWED T2IN, J5-24
|
||||
5 PE3 (OC3A/AIN1) MAX202ECWED A2OUT, J5-23
|
||||
6 PE4 (OC3B/INT4) J5-22
|
||||
7 PE5 (OC3C/INT5) J5-21, RTL8019AS INT 0, TP5 PE5
|
||||
8 PE6 (T3/INT6) J5-20
|
||||
9 PE7 (ICP3/INT7) J5-19
|
||||
10 PB0 (SS) Pull up of SS SPI master
|
||||
11 PB1 (SCK) J7-7, ISP_SCK (via 74HC4053) and AT45D011 SCK, J5-17
|
||||
12 PB2 (MOSI) AT45D011 SI. J5-16
|
||||
13 PB3 (MISO) AT45D011 SO, J5-15
|
||||
14 PB4 (OC0) AT45D011 CS\, J5-14
|
||||
15 PB5 (OC1A) J5-13
|
||||
16 PB6 (OC1B) J5-12
|
||||
(bottom)
|
||||
17 PB7 (OC2/OC1C) J5-11
|
||||
18 PG3/TOSC2 32.768KHz XTAL
|
||||
19 PG4/TOSC1 32.768KHz XTAL
|
||||
20 RESET RESET
|
||||
21 VCC
|
||||
22 GND GND
|
||||
23 XTAL2 14.7456MHz XTAL
|
||||
24 XTAL1 14.7456MHz XTAL
|
||||
25 PD0 (SCL/INT0) J5-10
|
||||
26 PD1 (SDA/INT1) J5-9
|
||||
27 PD2 (RXD1/INT2) J5-8, MAX488CSA RO (RS-485)
|
||||
28 PD3 (TXD1/INT3) J5-7, MAX488CSA DI (RS-485)
|
||||
29 PD4 (ICP1) J5-6
|
||||
30 PD5 (XCK1) J5-5
|
||||
31 PD6 (T1) J5-4
|
||||
32 PD7 (T2) J5-3
|
||||
(left)
|
||||
48 PA3 (AD3) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
47 PA4 (AD4) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
46 PA5 (AD5) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
45 PA6 (AD6) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
44 PA7 (AD7) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
43 PG2 (ALE) J5-1, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
42 PC7 (A15) TP4 A15, J5-27, 74HC5730
|
||||
41 PC6 (A14) J5-28, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
40 PC5 (A13) J5-29, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
39 PC4 (A12) J5-30, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
38 PC3 (A11) J5-31, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
37 PC2 (A10) J5-32, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
36 PC1 (A9) J5-33, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
35 PC0 (A8) J5-34, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
34 PG1 (RD) TP2 RD\, J5-52, 62246DLP-7, RTL8019AS
|
||||
33 PG0 (WR) TP3 WR\, J5-51, 62246DLP-7, RTL8019AS
|
||||
(top)
|
||||
64 AVCC
|
||||
63 GND GND
|
||||
62 AREF (analog supply)
|
||||
61 PF0 (ADC0) J6-5, PDV-P9 Light Sensor
|
||||
60 PF1 (ADC1) J6-7, Thermister
|
||||
59 PF2 (ADC2) J6-9, MXA2500GL Dual Axis Accesserometer, AOUTX
|
||||
58 PF3 (ADC3) J6-11, MXA2500GL Dual Axis Accesserometer, AOUTY
|
||||
57 PF4 (ADC4/TCK) J6-13, MXA2500GL Dual Axis Accesserometer, TOUT
|
||||
56 PF5 (ADC5/TMS) J6-15
|
||||
55 PF6 (ADC6/TDO) J6-17
|
||||
54 PF7 (ADC7/TDI) J6-19
|
||||
53 GND GND
|
||||
52 VCC
|
||||
51 PA0 (AD0) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
50 PA1 (AD1) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
49 PA2 (AD2) J5-?, 74HC5730, 62246DLP-7, RTL8019AS
|
||||
|
||||
DualOptiboot Bootloader
|
||||
^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
o FTDI (or similar) USB-To-Serial converter with compatible connector
|
||||
configured for DTR (AdaFruit, SparkFun, etc)
|
||||
o Obtain ard-reset-arduino Python script
|
||||
(one source: https://github.com/mikaelpatel/Cosa/blob/master/build/Arduino-Makefile/bin/ard-reset-arduino)
|
||||
This script triggers the DTR pin to enter bootloader mode.
|
||||
o Obtain avrdude for your platform.
|
||||
|
||||
Bootloader operates at 115200 baud. It would be useful to create a short script
|
||||
that invokes ard-reset-arduino and then avrdude to load program. This script
|
||||
could then also, optionally, invoke miniterm.py or some other serial interface
|
||||
program for console.
|
||||
|
||||
Example:
|
||||
|
||||
APP=nuttx
|
||||
CPU=atmega1284p
|
||||
BAUD=115200
|
||||
PORT=/dev/tty.usbserial-A703X8PQ
|
||||
avr-size --mcu=$CPU -C --format=avr $APP
|
||||
ard-reset-arduino --verbose $PORT
|
||||
avrdude -q -V -p $CPU -C {location-of-avrdude.conf} -D -c arduino -b $BAUD \
|
||||
-P $PORT -U flash:w:${APP}.hex:i
|
||||
miniterm.py --port=$PORT --baud=$BAUD -q --lf
|
||||
|
||||
Toolchains
|
||||
^^^^^^^^^^
|
||||
|
||||
The toolchain may be selected using the kconfig-mconf tool (via 'make menuconfig'),
|
||||
by editing the existing configuration file (defconfig), or by overriding
|
||||
the toolchain on the make commandline with CONFIG_AVR_TOOLCHAIN=<toolchain>.
|
||||
|
||||
The valid values for <toolchain> are BUILDROOT, CROSSPACK, LINUXGCC and WINAVR.
|
||||
|
||||
Buildroot:
|
||||
|
||||
There is a DIY buildroot version for the AVR boards here:
|
||||
http://sourceforge.net/projects/nuttx/files/buildroot/. See the
|
||||
following section for details on building this toolchain.
|
||||
|
||||
It is assumed in some places that buildroot toolchain is available
|
||||
at ../misc/buildroot/build_avr. Edit the setenv.sh file if
|
||||
this is not the case.
|
||||
|
||||
After configuring NuttX, make sure that CONFIG_AVR_BUILDROOT=y is set in your
|
||||
.config file.
|
||||
|
||||
WinAVR:
|
||||
|
||||
For Cygwin development environment on Windows machines, you can use
|
||||
WinAVR: http://sourceforge.net/projects/winavr/files/
|
||||
|
||||
It is assumed in some places that WinAVR is installed at C:/WinAVR. Edit the
|
||||
setenv.sh file if this is not the case.
|
||||
|
||||
After configuring NuttX, make sure that CONFIG_AVR_WINAVR=y is set in your
|
||||
.config file.
|
||||
|
||||
WARNING: There is an incompatible version of cygwin.dll in the WinAVR/bin
|
||||
directory! Make sure that the path to the correct cygwin.dll file precedes
|
||||
the path to the WinAVR binaries!
|
||||
|
||||
Linux:
|
||||
|
||||
For Linux, there are widely available avr-gcc packages. On Ubuntu, use:
|
||||
sudo apt-get install gcc-avr gdb-avr avr-libc
|
||||
|
||||
After configuring NuttX, make sure that CONFIG_AVR_LINUXGCC=y is set in your
|
||||
.config file.
|
||||
|
||||
Mac OS X:
|
||||
|
||||
For Mac OS X, the CrossPack for AVR toolchain is available from:
|
||||
|
||||
http://www.obdev.at/products/crosspack/index.html
|
||||
|
||||
This toolchain is functionally equivalent to the Linux GCC toolchain.
|
||||
|
||||
Windows Native Toolchains
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The WinAVR toolchain is a Windows native toolchain. There are several
|
||||
limitations to using a Windows native toolchain in a Cygwin environment.
|
||||
The three biggest are:
|
||||
|
||||
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
||||
performed automatically in the Cygwin makefiles using the 'cygpath'
|
||||
utility but you might easily find some new path problems. If so, check
|
||||
out 'cygpath -w'
|
||||
|
||||
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic
|
||||
links are used in Nuttx (e.g., include/arch). The make system works
|
||||
around these problems for the Windows tools by copying directories
|
||||
instead of linking them. But this can also cause some confusion for
|
||||
you: For example, you may edit a file in a "linked" directory and find
|
||||
that your changes had no effect. That is because you are building the
|
||||
copy of the file in the "fake" symbolic directory. If you use a
|
||||
Windows toolchain, you should get in the habit of making like this:
|
||||
|
||||
make clean_context all
|
||||
|
||||
An alias in your .bashrc file might make that less painful.
|
||||
|
||||
3. Dependencies are not made when using Windows versions of the GCC. This
|
||||
is because the dependencies are generated using Windows pathes which do
|
||||
not work with the Cygwin make.
|
||||
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
|
||||
An additional issue with the WinAVR toolchain, in particular, is that it
|
||||
contains an incompatible version of the Cygwin DLL in its bin/ directory.
|
||||
You must take care that the correct Cygwin DLL is used.
|
||||
|
||||
NuttX buildroot Toolchain
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
If NuttX buildroot toolchain source tarball cne can be downloaded from the
|
||||
NuttX SourceForge download site (https://sourceforge.net/projects/nuttx/files/).
|
||||
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
||||
|
||||
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
||||
|
||||
cd tools
|
||||
./configure.sh amber/<sub-dir>
|
||||
|
||||
NOTE: you also must copy avr-libc header files into the NuttX include
|
||||
directory with command perhaps like:
|
||||
|
||||
cp -a /cygdrive/c/WinAVR/include/avr include/.
|
||||
|
||||
2. Download the latest buildroot package into <some-dir>
|
||||
|
||||
3. unpack the buildroot tarball. The resulting directory may
|
||||
have versioning information on it like buildroot-x.y.z. If so,
|
||||
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
||||
|
||||
4. cd <some-dir>/buildroot
|
||||
|
||||
5. cp configs/avr-defconfig-4.5.2 .config
|
||||
|
||||
6. make oldconfig
|
||||
|
||||
7. make
|
||||
|
||||
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
||||
the path to the newly built binaries.
|
||||
|
||||
See the file configs/README.txt in the buildroot source tree. That has more
|
||||
detailed PLUS some special instructions that you will need to follow if you
|
||||
are building a toolchain for Cygwin under Windows.
|
||||
|
||||
avr-libc
|
||||
^^^^^^^^
|
||||
|
||||
Header Files
|
||||
|
||||
In any case, header files from avr-libc are required: http://www.nongnu.org/avr-libc/.
|
||||
A snapshot of avr-lib is included in the WinAVR installation. For Linux
|
||||
development platforms, avr-libc package is readily available (and would
|
||||
be installed in the apt-get command shown above). But if you are using
|
||||
the NuttX buildroot configuration on Cygwin, then you will have to build
|
||||
get avr-libc from binaries.
|
||||
|
||||
Header File Installation
|
||||
|
||||
The NuttX build will required that the AVR header files be available via
|
||||
the NuttX include directory. This can be accomplished by either copying
|
||||
the avr-libc header files into the NuttX include directory:
|
||||
|
||||
cp -a <avr-libc-path>/include/avr <nuttx-path>/include/.
|
||||
|
||||
Or simply using a symbolic link:
|
||||
|
||||
ln -s <avr-libc-path>/include/avr <nuttx-path>/include/.
|
||||
|
||||
Build Notes:
|
||||
|
||||
It may not necessary to have a built version of avr-lib; only header files
|
||||
are required. Bu if you choose to use the optimized libraru functions of
|
||||
the flowing point library, then you may have to build avr-lib from sources.
|
||||
Below are instructions for building avr-lib from fresh sources:
|
||||
|
||||
1. Download the avr-libc package from:
|
||||
|
||||
http://savannah.nongnu.org/projects/avr-libc/
|
||||
|
||||
I am using avr-lib-1.7.1.tar.bz2
|
||||
|
||||
2. Upack the tarball and cd into the
|
||||
|
||||
tar jxf avr-lib-1.7.1.tar.bz2
|
||||
cd avr-lib-1.7.1
|
||||
|
||||
3. Configure avr-lib. Assuming that WinAVR is installed at the following
|
||||
loction:
|
||||
|
||||
export PATH=/cygdrive/c/WinAVR/bin:$PATH
|
||||
./configure --build=`./config.guess` --host=avr
|
||||
|
||||
This takes a *long* time.
|
||||
|
||||
4. Make avr-lib.
|
||||
|
||||
make
|
||||
|
||||
This also takes a long time because it generates variants for nearly
|
||||
all AVR chips.
|
||||
|
||||
5. Install avr-lib.
|
||||
|
||||
make install
|
||||
|
||||
MoteinoMEGA Configuration Options
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=avr
|
||||
|
||||
CONFIG_ARCH_FAMILY - For use in C code:
|
||||
|
||||
CONFIG_ARCH_FAMILY=avr
|
||||
|
||||
CONFIG_ARCH_FAMILY_family - For use in C code:
|
||||
|
||||
CONFIG_ARCH_FAMILY_AVR=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=atmega
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
||||
chip:
|
||||
|
||||
CONFIG_ARCH_CHIP_ATMEGA1284P=y
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=moteino-mega
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_MOTEINO_MEGA=y
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_RAM_SIZE - Describes the installed DRAM. One of:
|
||||
|
||||
CONFIG_RAM_SIZE=(16*1024) - (16Kb)
|
||||
|
||||
CONFIG_RAM_START - The start address of installed SRAM
|
||||
|
||||
CONFIG_RAM_START=0x800100
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
|
||||
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
cause a 100 second delay during boot-up. This 100 second delay
|
||||
serves no purpose other than it allows you to calibratre
|
||||
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
||||
the delay actually is 100 seconds.
|
||||
|
||||
Individual subsystems can be enabled:
|
||||
|
||||
CONFIG_AVR_INT0=n
|
||||
CONFIG_AVR_INT1=n
|
||||
CONFIG_AVR_INT2=n
|
||||
CONFIG_AVR_INT3=n
|
||||
CONFIG_AVR_INT4=n
|
||||
CONFIG_AVR_INT5=n
|
||||
CONFIG_AVR_INT6=n
|
||||
CONFIG_AVR_INT7=n
|
||||
CONFIG_AVR_WDT=n
|
||||
CONFIG_AVR_TIMER0=n
|
||||
CONFIG_AVR_TIMER1=n
|
||||
CONFIG_AVR_TIMER2=n
|
||||
CONFIG_AVR_TIMER3=n
|
||||
CONFIG_AVR_SPI=n
|
||||
CONFIG_AVR_USART0=y
|
||||
CONFIG_AVR_USART1=n
|
||||
CONFIG_AVR_ADC=n
|
||||
CONFIG_AVR_ANACOMP=n
|
||||
CONFIG_AVR_TWI=n
|
||||
|
||||
If the watchdog is enabled, this specifies the initial timeout. Default
|
||||
is maximum supported value.
|
||||
|
||||
CONFIG_WDTO_15MS
|
||||
CONFIG_WDTO_30MS
|
||||
CONFIG_WDTO_60MS
|
||||
CONFIG_WDTO_120MS
|
||||
CONFIG_WDTO_1250MS
|
||||
CONFIG_WDTO_500MS
|
||||
CONFIG_WDTO_1S
|
||||
CONFIG_WDTO_2S
|
||||
CONFIG_WDTO_4S
|
||||
CONFIG_WDTO_8S
|
||||
|
||||
ATMEGA specific device driver settings
|
||||
|
||||
CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
|
||||
console and ttys0 (default is the USART0).
|
||||
CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
CONFIG_USARTn_BAUD - The configure BAUD of the USART. Must be
|
||||
CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
CONFIG_USARTn_2STOP - Two stop bits
|
||||
|
||||
Configurations
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Common Configuration Notes
|
||||
--------------------------
|
||||
|
||||
1. Each MoteinoMEGA configuration is maintained in a sub-directory and
|
||||
can be selected as follow:
|
||||
|
||||
cd tools
|
||||
./configure.sh moteino-mega/<subdir>
|
||||
cd -
|
||||
. ./setenv.sh
|
||||
|
||||
Where <subdir> is one of the configuration sub-directories described in
|
||||
the following paragraph.
|
||||
|
||||
NOTE: You must also copy avr-libc header files, perhaps like:
|
||||
|
||||
cp -a /cygdrive/c/WinAVR/include/avr include/.
|
||||
|
||||
2. These configurations use the mconf-based configuration tool. To
|
||||
change a configurations using that tool, you should:
|
||||
|
||||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||
and misc/tools/
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
3. By default, all configurations assume the NuttX Buildroot toolchain
|
||||
under Cygwin with Windows. This is easily reconfigured:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
CONFIG_AVR_BUILDROOT=y
|
||||
|
||||
Configuration Sub-Directories
|
||||
-----------------------------
|
||||
|
||||
hello:
|
||||
The simple apps/examples/hello "Hello, World!" example.
|
||||
|
||||
nsh:
|
||||
Configures the NuttShell (nsh) located at examples/nsh. The
|
||||
Configuration enables only the serial NSH interfaces.
|
||||
98
configs/moteino-mega/hello/Make.defs
Normal file
98
configs/moteino-mega/hello/Make.defs
Normal file
|
|
@ -0,0 +1,98 @@
|
|||
############################################################################
|
||||
# configs/moteino-mega/hello/Make.defs
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = $(ARCHINCLUDES) "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/hello/ld.script}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "$(TOPDIR)/include"
|
||||
ARCHXXINCLUDES = $(ARCHINCLUDES) -isystem "$(TOPDIR)/include/cxx"
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/hello/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
580
configs/moteino-mega/hello/defconfig
Normal file
580
configs/moteino-mega/hello/defconfig
Normal file
|
|
@ -0,0 +1,580 @@
|
|||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_DEFAULT_SMALL=y
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
CONFIG_HOST_OSX=y
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
# CONFIG_WINDOWS_CYGWIN is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
# CONFIG_RAW_BINARY is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
CONFIG_ARCH_HAVE_CUSTOMOPT=y
|
||||
# CONFIG_DEBUG_NOOPT is not set
|
||||
# CONFIG_DEBUG_CUSTOMOPT is not set
|
||||
CONFIG_DEBUG_FULLOPT=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_ARM is not set
|
||||
CONFIG_ARCH_AVR=y
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="avr"
|
||||
CONFIG_ARCH_FAMILY="avr"
|
||||
CONFIG_ARCH_CHIP="atmega"
|
||||
# CONFIG_ARCH_CHIP_ATMEGA128 is not set
|
||||
CONFIG_ARCH_CHIP_ATMEGA1284P=y
|
||||
# CONFIG_ARCH_CHIP_AT90USB646 is not set
|
||||
# CONFIG_ARCH_CHIP_AT90USB647 is not set
|
||||
# CONFIG_ARCH_CHIP_AT90USB1286 is not set
|
||||
# CONFIG_ARCH_CHIP_AT90USB1287 is not set
|
||||
# CONFIG_ARCH_CHIP_AT32UC3B0256 is not set
|
||||
CONFIG_ARCH_FAMILY_AVR=y
|
||||
CONFIG_ARCH_CHIP_ATMEGA=y
|
||||
|
||||
#
|
||||
# AVR Configuration Options
|
||||
#
|
||||
# CONFIG_AVR_WINAVR is not set
|
||||
CONFIG_AVR_BUILDROOT=y
|
||||
# CONFIG_AVR_USART1 is not set
|
||||
|
||||
#
|
||||
# ATMega Configuration Options
|
||||
#
|
||||
CONFIG_AVR_USART0=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
CONFIG_ARCH_NOINTC=y
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
# CONFIG_ARCH_HAVE_IRQPRIO is not set
|
||||
# CONFIG_ARCH_ADDRENV is not set
|
||||
# CONFIG_ARCH_HAVE_VFORK is not set
|
||||
# CONFIG_ARCH_HAVE_MMU is not set
|
||||
# CONFIG_ARCH_NAND_HWECC is not set
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_IDLE_CUSTOM is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=864
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# Interrupt options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x800100
|
||||
CONFIG_RAM_SIZE=16384
|
||||
# CONFIG_ARCH_HAVE_SDRAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_MOTEINO_MEGA=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="moteino-mega"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
CONFIG_RR_INTERVAL=0
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2015
|
||||
CONFIG_START_MONTH=1
|
||||
CONFIG_START_DAY=21
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="hello_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||
CONFIG_DISABLE_PTHREAD=y
|
||||
CONFIG_DISABLE_SIGNALS=y
|
||||
CONFIG_DISABLE_MQUEUE=y
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=4
|
||||
CONFIG_NPTHREAD_KEYS=0
|
||||
CONFIG_NFILE_DESCRIPTORS=4
|
||||
CONFIG_NFILE_STREAMS=4
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=0
|
||||
CONFIG_MQ_MAXMSGSIZE=0
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_WDOG_INTRESERVE=0
|
||||
CONFIG_PREALLOC_TIMERS=0
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=512
|
||||
CONFIG_USERMAIN_STACKSIZE=512
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_I2S is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_VIDEO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART0=y
|
||||
|
||||
#
|
||||
# USART Configuration
|
||||
#
|
||||
CONFIG_USART0_ISUART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_USART0_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART0 Configuration
|
||||
#
|
||||
CONFIG_USART0_RXBUFSIZE=256
|
||||
CONFIG_USART0_TXBUFSIZE=256
|
||||
CONFIG_USART0_BAUD=115200
|
||||
CONFIG_USART0_BITS=8
|
||||
CONFIG_USART0_PARITY=0
|
||||
CONFIG_USART0_2STOP=0
|
||||
# CONFIG_USART0_IFLOWCONTROL is not set
|
||||
# CONFIG_USART0_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_NET is not set
|
||||
# CONFIG_ARCH_HAVE_PHY is not set
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
|
||||
# CONFIG_FS_READABLE is not set
|
||||
# CONFIG_FS_WRITABLE is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_PROCFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=1
|
||||
# CONFIG_ARCH_HAVE_HEAP2 is not set
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=0
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=0
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
CONFIG_EXAMPLES_HELLO=y
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXTERM is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_WEBSERVER is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_NETLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
|
||||
#
|
||||
# System Libraries and NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# USB CDC/ACM Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# USB Composite Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# INI File Parser
|
||||
#
|
||||
# CONFIG_SYSTEM_INIFILE is not set
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# NxPlayer media player library / command Line
|
||||
#
|
||||
# CONFIG_SYSTEM_NXPLAYER is not set
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# EMACS-like Command Line Editor
|
||||
#
|
||||
# CONFIG_SYSTEM_CLE is not set
|
||||
|
||||
#
|
||||
# VI Work-Alike Editor
|
||||
#
|
||||
# CONFIG_SYSTEM_VI is not set
|
||||
|
||||
#
|
||||
# Stack Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# USB Mass Storage Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
211
configs/moteino-mega/hello/ld.script
Normal file
211
configs/moteino-mega/hello/ld.script
Normal file
|
|
@ -0,0 +1,211 @@
|
|||
/**************************************************************************************
|
||||
* configs/moteino-mega/hello/ld.script
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
/* Memory Regions *********************************************************************/
|
||||
/* -------------- ------ ------+------- -- ------ -- ------ --- ------ ----+------- ---
|
||||
* FLASH | REGISTERS I/O EXT I/O ISRAM | EEPROM
|
||||
* | REGISTERS REGISTERS |
|
||||
* -------------- ------ ------+------- -- ------ -- ------ --- ------ ----+------- ---
|
||||
* ATMEGA1284P 0x0000 128Kb | 0x0000 32 0x0020 64 0x0060 160 0x0100 16Kb| 0x0000 4Kb
|
||||
* -------------- ------ ------+------- -- ------ -- ------ --- ------ ----+------- ---
|
||||
* *Memory configuration A
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0, LENGTH = 128K
|
||||
sram (rw!x) : ORIGIN = 0x800100, LENGTH = 16K
|
||||
eeprom (rw!x) : ORIGIN = 0x810000, LENGTH = 4K
|
||||
}
|
||||
|
||||
OUTPUT_FORMAT("elf32-avr","elf32-avr","elf32-avr")
|
||||
OUTPUT_ARCH(avr:5)
|
||||
ENTRY(__start)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
/* Read-only sections, merged into text segment: */
|
||||
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.gnu.version : { *(.gnu.version) }
|
||||
.gnu.version_d : { *(.gnu.version_d) }
|
||||
.gnu.version_r : { *(.gnu.version_r) }
|
||||
.rel.init : { *(.rel.init) }
|
||||
.rela.init : { *(.rela.init) }
|
||||
|
||||
.rel.text :
|
||||
{
|
||||
*(.rel.text)
|
||||
*(.rel.text.*)
|
||||
*(.rel.gnu.linkonce.t*)
|
||||
}
|
||||
|
||||
.rela.text :
|
||||
{
|
||||
*(.rela.text)
|
||||
*(.rela.text.*)
|
||||
*(.rela.gnu.linkonce.t*)
|
||||
}
|
||||
|
||||
.rel.fini : { *(.rel.fini) }
|
||||
.rela.fini : { *(.rela.fini) }
|
||||
|
||||
.rel.rodata :
|
||||
{
|
||||
*(.rel.rodata)
|
||||
*(.rel.rodata.*)
|
||||
*(.rel.gnu.linkonce.r*)
|
||||
}
|
||||
|
||||
.rela.rodata :
|
||||
{
|
||||
*(.rela.rodata)
|
||||
*(.rela.rodata.*)
|
||||
*(.rela.gnu.linkonce.r*)
|
||||
}
|
||||
|
||||
.rel.data :
|
||||
{
|
||||
*(.rel.data)
|
||||
*(.rel.data.*)
|
||||
*(.rel.gnu.linkonce.d*)
|
||||
}
|
||||
|
||||
.rela.data :
|
||||
{
|
||||
*(.rela.data)
|
||||
*(.rela.data.*)
|
||||
*(.rela.gnu.linkonce.d*)
|
||||
}
|
||||
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
|
||||
.text :
|
||||
{
|
||||
_stext = . ;
|
||||
*(.vectors)
|
||||
*(.init)
|
||||
*(.handlers)
|
||||
*(.text)
|
||||
*(.text.*)
|
||||
_etext = . ;
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data :
|
||||
{
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss :
|
||||
{
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Global data not cleared after reset. */
|
||||
|
||||
.noinit :
|
||||
{
|
||||
_snoinit = ABSOLUTE(.);
|
||||
*(.noinit*)
|
||||
_enoinit = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
.eeprom :
|
||||
{
|
||||
_seeprom = ABSOLUTE(.);
|
||||
*(.eeprom*)
|
||||
_eeeprom = ABSOLUTE(.);
|
||||
} > eeprom
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
|
||||
/* DWARF debug sections.
|
||||
Symbols in the DWARF debugging sections are relative to the beginning
|
||||
of the section so we begin them at 0. */
|
||||
|
||||
/* DWARF 1 */
|
||||
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
|
||||
/* GNU DWARF 1 extensions */
|
||||
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
|
||||
/* DWARF 2 */
|
||||
|
||||
.debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
}
|
||||
63
configs/moteino-mega/hello/setenv.sh
Executable file
63
configs/moteino-mega/hello/setenv.sh
Executable file
|
|
@ -0,0 +1,63 @@
|
|||
#!/bin/bash
|
||||
# configs/moteino-mega/hello/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the WinAVR
|
||||
# toolchain under windows. This is *not* the default install
|
||||
# location so you will probably have to edit this. You will also have
|
||||
# to edit this if you install the Linux AVR toolchain as well
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/WinAVR/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_avr/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
97
configs/moteino-mega/include/board.h
Normal file
97
configs/moteino-mega/include/board.h
Normal file
|
|
@ -0,0 +1,97 @@
|
|||
/****************************************************************************
|
||||
* configs/moteino-mega/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_MOTEINO_MEGA_INCLUDE_BOARD_H
|
||||
#define __CONFIGS_MOTEINO_MEGA_INCLUDE_BOARD_H
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/* Clocking *****************************************************************/
|
||||
/* Assume default CLKDIV8 fuse setting is overridden to CLKDIV1 */
|
||||
|
||||
#define BOARD_XTAL_FREQ 16000000 /* 16MHz crystal */
|
||||
#define BOARD_CPU_CLOCK BOARD_XTAL_FREQ /* F_CPU = 16MHz */
|
||||
|
||||
/* LED definitions **********************************************************/
|
||||
|
||||
/* The MoteinoMEGA has a single on-board LED connected to PortD, Pin 7 */
|
||||
|
||||
#define LED_STARTED 0 /* OFF ON (never happens) */
|
||||
#define LED_HEAPALLOCATE 0 /* OFF ON (never happens) */
|
||||
#define LED_IRQSENABLED 0 /* OFF ON (never happens) */
|
||||
#define LED_STACKCREATED 1 /* ON ON (never happens) */
|
||||
#define LED_INIRQ 2 /* OFF NC (momentary) */
|
||||
#define LED_SIGNAL 2 /* OFF NC (momentary) */
|
||||
#define LED_ASSERTION 2 /* OFF NC (momentary) */
|
||||
#define LED_PANIC 0 /* OFF ON (1Hz flashing) */
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************
|
||||
* Inline Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_MOTEINO_MEGA_INCLUDE_BOARD_H */
|
||||
98
configs/moteino-mega/nsh/Make.defs
Normal file
98
configs/moteino-mega/nsh/Make.defs
Normal file
|
|
@ -0,0 +1,98 @@
|
|||
############################################################################
|
||||
# configs/moteino-mega/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/avr/src/avr/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = $(ARCHINCLUDES) "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "$(TOPDIR)/include"
|
||||
ARCHXXINCLUDES = $(ARCHINCLUDES) -isystem "$(TOPDIR)/include/cxx"
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
651
configs/moteino-mega/nsh/defconfig
Normal file
651
configs/moteino-mega/nsh/defconfig
Normal file
|
|
@ -0,0 +1,651 @@
|
|||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_DEFAULT_SMALL=y
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
CONFIG_HOST_OSX=y
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
# CONFIG_WINDOWS_CYGWIN is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
# CONFIG_RAW_BINARY is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
CONFIG_ARCH_HAVE_CUSTOMOPT=y
|
||||
# CONFIG_DEBUG_NOOPT is not set
|
||||
# CONFIG_DEBUG_CUSTOMOPT is not set
|
||||
CONFIG_DEBUG_FULLOPT=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_ARM is not set
|
||||
CONFIG_ARCH_AVR=y
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="avr"
|
||||
CONFIG_ARCH_FAMILY="avr"
|
||||
CONFIG_ARCH_CHIP="atmega"
|
||||
# CONFIG_ARCH_CHIP_ATMEGA128 is not set
|
||||
CONFIG_ARCH_CHIP_ATMEGA1284P=y
|
||||
# CONFIG_ARCH_CHIP_AT90USB646 is not set
|
||||
# CONFIG_ARCH_CHIP_AT90USB647 is not set
|
||||
# CONFIG_ARCH_CHIP_AT90USB1286 is not set
|
||||
# CONFIG_ARCH_CHIP_AT90USB1287 is not set
|
||||
# CONFIG_ARCH_CHIP_AT32UC3B0256 is not set
|
||||
CONFIG_ARCH_FAMILY_AVR=y
|
||||
CONFIG_ARCH_CHIP_ATMEGA=y
|
||||
|
||||
#
|
||||
# AVR Configuration Options
|
||||
#
|
||||
# CONFIG_AVR_WINAVR is not set
|
||||
CONFIG_AVR_BUILDROOT=y
|
||||
# CONFIG_AVR_USART1 is not set
|
||||
|
||||
#
|
||||
# ATMega Configuration Options
|
||||
#
|
||||
CONFIG_AVR_USART0=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
CONFIG_ARCH_NOINTC=y
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
# CONFIG_ARCH_HAVE_IRQPRIO is not set
|
||||
# CONFIG_ARCH_ADDRENV is not set
|
||||
# CONFIG_ARCH_HAVE_VFORK is not set
|
||||
# CONFIG_ARCH_HAVE_MMU is not set
|
||||
# CONFIG_ARCH_NAND_HWECC is not set
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_IDLE_CUSTOM is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=864
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# Interrupt options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x800100
|
||||
CONFIG_RAM_SIZE=16384
|
||||
# CONFIG_ARCH_HAVE_SDRAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_MOTEINO_MEGA=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="moteino-mega"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_USEC_PER_TICK=10000
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2015
|
||||
CONFIG_START_MONTH=1
|
||||
CONFIG_START_DAY=21
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||
CONFIG_DISABLE_PTHREAD=y
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
CONFIG_DISABLE_MQUEUE=y
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=8
|
||||
CONFIG_NPTHREAD_KEYS=0
|
||||
CONFIG_NFILE_DESCRIPTORS=6
|
||||
CONFIG_NFILE_STREAMS=6
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=0
|
||||
CONFIG_MQ_MAXMSGSIZE=0
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_WDOG_INTRESERVE=0
|
||||
CONFIG_PREALLOC_TIMERS=0
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=512
|
||||
CONFIG_USERMAIN_STACKSIZE=512
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=512
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_I2S is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_VIDEO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART0=y
|
||||
|
||||
#
|
||||
# USART Configuration
|
||||
#
|
||||
CONFIG_USART0_ISUART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_USART0_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART0 Configuration
|
||||
#
|
||||
CONFIG_USART0_RXBUFSIZE=256
|
||||
CONFIG_USART0_TXBUFSIZE=256
|
||||
CONFIG_USART0_BAUD=115200
|
||||
CONFIG_USART0_BITS=8
|
||||
CONFIG_USART0_PARITY=0
|
||||
CONFIG_USART0_2STOP=0
|
||||
# CONFIG_USART0_IFLOWCONTROL is not set
|
||||
# CONFIG_USART0_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_NET is not set
|
||||
# CONFIG_ARCH_HAVE_PHY is not set
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_PSEUDOFS_OPERATIONS=y
|
||||
# CONFIG_FS_READABLE is not set
|
||||
# CONFIG_FS_WRITABLE is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_PROCFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=1
|
||||
# CONFIG_ARCH_HAVE_HEAP2 is not set
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=0
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=0
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=y
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXTERM is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_WEBSERVER is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_NETLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
CONFIG_NSH_READLINE=y
|
||||
# CONFIG_NSH_CLE is not set
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
CONFIG_NSH_DISABLE_ADDROUTE=y
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
CONFIG_NSH_DISABLE_CMP=y
|
||||
CONFIG_NSH_DISABLE_DD=y
|
||||
CONFIG_NSH_DISABLE_DF=y
|
||||
CONFIG_NSH_DISABLE_DELROUTE=y
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
CONFIG_NSH_DISABLE_EXEC=y
|
||||
CONFIG_NSH_DISABLE_EXIT=y
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
CONFIG_NSH_DISABLE_GET=y
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
CONFIG_NSH_DISABLE_HEXDUMP=y
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
CONFIG_NSH_DISABLE_LOSETUP=y
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
CONFIG_NSH_DISABLE_MKFIFO=y
|
||||
CONFIG_NSH_DISABLE_MKRD=y
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
CONFIG_NSH_DISABLE_PUT=y
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
CONFIG_NSH_DISABLE_WGET=y
|
||||
CONFIG_NSH_DISABLE_XD=y
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_DISABLE_SEMICOLON=y
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
# CONFIG_NSH_ARGCAT is not set
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
CONFIG_NSH_DISABLESCRIPT=y
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
|
||||
#
|
||||
# System Libraries and NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# USB CDC/ACM Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# USB Composite Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# INI File Parser
|
||||
#
|
||||
# CONFIG_SYSTEM_INIFILE is not set
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# NxPlayer media player library / command Line
|
||||
#
|
||||
# CONFIG_SYSTEM_NXPLAYER is not set
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# EMACS-like Command Line Editor
|
||||
#
|
||||
# CONFIG_SYSTEM_CLE is not set
|
||||
|
||||
#
|
||||
# VI Work-Alike Editor
|
||||
#
|
||||
# CONFIG_SYSTEM_VI is not set
|
||||
|
||||
#
|
||||
# Stack Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# USB Mass Storage Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
211
configs/moteino-mega/nsh/ld.script
Normal file
211
configs/moteino-mega/nsh/ld.script
Normal file
|
|
@ -0,0 +1,211 @@
|
|||
/**************************************************************************************
|
||||
* configs/moteino-mega/nsh/ld.script
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
/* Memory Regions *********************************************************************/
|
||||
/* -------------- ------ ------+------- -- ------ -- ------ --- ------ ----+------- ---
|
||||
* FLASH | REGISTERS I/O EXT I/O ISRAM | EEPROM
|
||||
* | REGISTERS REGISTERS |
|
||||
* -------------- ------ ------+------- -- ------ -- ------ --- ------ ----+------- ---
|
||||
* ATMEGA1284P 0x0000 128Kb | 0x0000 32 0x0020 64 0x0060 160 0x0100 16Kb| 0x0000 4Kb
|
||||
* -------------- ------ ------+------- -- ------ -- ------ --- ------ ----+------- ---
|
||||
* *Memory configuration A
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0, LENGTH = 128K
|
||||
sram (rw!x) : ORIGIN = 0x800100, LENGTH = 16K
|
||||
eeprom (rw!x) : ORIGIN = 0x810000, LENGTH = 4K
|
||||
}
|
||||
|
||||
OUTPUT_FORMAT("elf32-avr","elf32-avr","elf32-avr")
|
||||
OUTPUT_ARCH(avr:5)
|
||||
ENTRY(__start)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
/* Read-only sections, merged into text segment: */
|
||||
|
||||
.hash : { *(.hash) }
|
||||
.dynsym : { *(.dynsym) }
|
||||
.dynstr : { *(.dynstr) }
|
||||
.gnu.version : { *(.gnu.version) }
|
||||
.gnu.version_d : { *(.gnu.version_d) }
|
||||
.gnu.version_r : { *(.gnu.version_r) }
|
||||
.rel.init : { *(.rel.init) }
|
||||
.rela.init : { *(.rela.init) }
|
||||
|
||||
.rel.text :
|
||||
{
|
||||
*(.rel.text)
|
||||
*(.rel.text.*)
|
||||
*(.rel.gnu.linkonce.t*)
|
||||
}
|
||||
|
||||
.rela.text :
|
||||
{
|
||||
*(.rela.text)
|
||||
*(.rela.text.*)
|
||||
*(.rela.gnu.linkonce.t*)
|
||||
}
|
||||
|
||||
.rel.fini : { *(.rel.fini) }
|
||||
.rela.fini : { *(.rela.fini) }
|
||||
|
||||
.rel.rodata :
|
||||
{
|
||||
*(.rel.rodata)
|
||||
*(.rel.rodata.*)
|
||||
*(.rel.gnu.linkonce.r*)
|
||||
}
|
||||
|
||||
.rela.rodata :
|
||||
{
|
||||
*(.rela.rodata)
|
||||
*(.rela.rodata.*)
|
||||
*(.rela.gnu.linkonce.r*)
|
||||
}
|
||||
|
||||
.rel.data :
|
||||
{
|
||||
*(.rel.data)
|
||||
*(.rel.data.*)
|
||||
*(.rel.gnu.linkonce.d*)
|
||||
}
|
||||
|
||||
.rela.data :
|
||||
{
|
||||
*(.rela.data)
|
||||
*(.rela.data.*)
|
||||
*(.rela.gnu.linkonce.d*)
|
||||
}
|
||||
|
||||
.rel.ctors : { *(.rel.ctors) }
|
||||
.rela.ctors : { *(.rela.ctors) }
|
||||
.rel.dtors : { *(.rel.dtors) }
|
||||
.rela.dtors : { *(.rela.dtors) }
|
||||
.rel.got : { *(.rel.got) }
|
||||
.rela.got : { *(.rela.got) }
|
||||
.rel.bss : { *(.rel.bss) }
|
||||
.rela.bss : { *(.rela.bss) }
|
||||
.rel.plt : { *(.rel.plt) }
|
||||
.rela.plt : { *(.rela.plt) }
|
||||
|
||||
.text :
|
||||
{
|
||||
_stext = . ;
|
||||
*(.vectors)
|
||||
*(.init)
|
||||
*(.handlers)
|
||||
*(.text)
|
||||
*(.text.*)
|
||||
_etext = . ;
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data :
|
||||
{
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.bss :
|
||||
{
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Global data not cleared after reset. */
|
||||
|
||||
.noinit :
|
||||
{
|
||||
_snoinit = ABSOLUTE(.);
|
||||
*(.noinit*)
|
||||
_enoinit = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
.eeprom :
|
||||
{
|
||||
_seeprom = ABSOLUTE(.);
|
||||
*(.eeprom*)
|
||||
_eeeprom = ABSOLUTE(.);
|
||||
} > eeprom
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
|
||||
/* DWARF debug sections.
|
||||
Symbols in the DWARF debugging sections are relative to the beginning
|
||||
of the section so we begin them at 0. */
|
||||
|
||||
/* DWARF 1 */
|
||||
|
||||
.debug 0 : { *(.debug) }
|
||||
.line 0 : { *(.line) }
|
||||
|
||||
/* GNU DWARF 1 extensions */
|
||||
|
||||
.debug_srcinfo 0 : { *(.debug_srcinfo) }
|
||||
.debug_sfnames 0 : { *(.debug_sfnames) }
|
||||
|
||||
/* DWARF 1.1 and DWARF 2 */
|
||||
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
|
||||
/* DWARF 2 */
|
||||
|
||||
.debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_frame 0 : { *(.debug_frame) }
|
||||
.debug_str 0 : { *(.debug_str) }
|
||||
.debug_loc 0 : { *(.debug_loc) }
|
||||
.debug_macinfo 0 : { *(.debug_macinfo) }
|
||||
}
|
||||
63
configs/moteino-mega/nsh/setenv.sh
Executable file
63
configs/moteino-mega/nsh/setenv.sh
Executable file
|
|
@ -0,0 +1,63 @@
|
|||
#!/bin/bash
|
||||
# configs/moteino-mega/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the WinAVR
|
||||
# toolchain under windows. This is *not* the default install
|
||||
# location so you will probably have to edit this. You will also have
|
||||
# to edit this if you install the Linux AVR toolchain as well
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/WinAVR/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_avr/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
2
configs/moteino-mega/src/.gitignore
vendored
Normal file
2
configs/moteino-mega/src/.gitignore
vendored
Normal file
|
|
@ -0,0 +1,2 @@
|
|||
/.depend
|
||||
/Make.dep
|
||||
96
configs/moteino-mega/src/Makefile
Normal file
96
configs/moteino-mega/src/Makefile
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
############################################################################
|
||||
# configs/moteino-mega/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
ASRCS =
|
||||
CSRCS = up_boot.c
|
||||
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
CSRCS += up_leds.c
|
||||
endif
|
||||
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(CONFIG_ARCH_FAMILY_AVR32),y)
|
||||
ARCH_SUBDIR = avr32
|
||||
endif
|
||||
ifeq ($(CONFIG_ARCH_FAMILY_AVR),y)
|
||||
ARCH_SUBDIR = avr
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(TOPDIR)/sched}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/common}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}"
|
||||
else
|
||||
CFLAGS += -I "$(TOPDIR)/sched"
|
||||
CFLAGS += -I "$(ARCH_SRCDIR)/chip"
|
||||
CFLAGS += -I "$(ARCH_SRCDIR)/common"
|
||||
CFLAGS += -I "$(ARCH_SRCDIR)/$(ARCH_SUBDIR)"
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
$(call ARCHIVE, $@, $(OBJS))
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
$(Q) touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, libboard$(LIBEXT))
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(call DELFILE, Make.dep)
|
||||
$(call DELFILE, .depend)
|
||||
|
||||
-include Make.dep
|
||||
101
configs/moteino-mega/src/moteino_mega_internal.h
Normal file
101
configs/moteino-mega/src/moteino_mega_internal.h
Normal file
|
|
@ -0,0 +1,101 @@
|
|||
/****************************************************************************
|
||||
* configs/moteino-mega/src/moteino-mega-internal.h
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __CONFIGS_MOTEINO_MEGA_SRC_MOTEINO_MEGA_INTERNAL_H
|
||||
#define __CONFIGS_MOTEINO_MEGA_SRC_MOTEINO_MEGA_INTERNAL_H
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************
|
||||
* Inline Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: atmega_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the Amber Web Server.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#if defined(CONFIG_AVR_SPI1) || defined(CONFIG_AVR_SPI2)
|
||||
EXTERN void weak_function atmega_spiinitialize(void);
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: atmega_ledinit
|
||||
*
|
||||
* Description:
|
||||
* Configure on-board LEDs if LED support has been selected.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
EXTERN void atmega_ledinit(void);
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_MOTEINO_MEGA_SRC_MOTEINO_MEGA_INTERNAL_H */
|
||||
92
configs/moteino-mega/src/up_boot.c
Normal file
92
configs/moteino-mega/src/up_boot.c
Normal file
|
|
@ -0,0 +1,92 @@
|
|||
/************************************************************************************
|
||||
* configs/moteino-mega/src/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
|
||||
#include "atmega_internal.h"
|
||||
#include "moteino_mega_internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: up_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All ATMega architectures must provide the following entry point. This entry
|
||||
* point is called early in the intitialization -- after all memory has been
|
||||
* configured and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void up_boardinitialize(void)
|
||||
{
|
||||
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
|
||||
* function atmega_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_AVR_SPI1) || defined(CONFIG_AVR_SPI2)
|
||||
if (atmega_spiinitialize)
|
||||
{
|
||||
atmega_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
atmega_ledinit();
|
||||
#endif
|
||||
}
|
||||
189
configs/moteino-mega/src/up_leds.c
Normal file
189
configs/moteino-mega/src/up_leds.c
Normal file
|
|
@ -0,0 +1,189 @@
|
|||
/****************************************************************************
|
||||
* configs/moteino-mega/src/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
#include <avr/io.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
|
||||
#include "atmega_internal.h"
|
||||
#include "moteino_mega_internal.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
|
||||
* with CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LEDS
|
||||
# define leddbg lldbg
|
||||
# ifdef CONFIG_DEBUG_VERBOSE
|
||||
# define ledvdbg lldbg
|
||||
# else
|
||||
# define ledvdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
static bool g_ncoff;
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: atmega_ledinit
|
||||
****************************************************************************/
|
||||
|
||||
void atmega_ledinit(void)
|
||||
{
|
||||
/* The MoteinoMEGA's single LED is on Port D, Pin 7. Configure this pin as an
|
||||
* output and turn it OFF. The "other" side of the LED is onnected to
|
||||
* ground through a resistor. Therefore, a logic value of 0 should turn
|
||||
* the LED off.
|
||||
*/
|
||||
|
||||
DDRD |= (1 << 7);
|
||||
PORTD &= ~(1 << 7);
|
||||
g_ncoff = true;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_led_on
|
||||
****************************************************************************/
|
||||
|
||||
void board_led_on(int led)
|
||||
{
|
||||
/* ON OFF
|
||||
* LED_STARTED 0 OFF ON (never happens)
|
||||
* LED_HEAPALLOCATE 0 OFF ON (never happens)
|
||||
* LED_IRQSENABLED 0 OFF ON (never happens)
|
||||
* LED_STACKCREATED 1 ON ON (never happens)
|
||||
* LED_INIRQ 2 OFF NC (momentary)
|
||||
* LED_SIGNAL 2 OFF NC (momentary)
|
||||
* LED_ASSERTION 2 OFF NC (momentary)
|
||||
* LED_PANIC 0 OFF ON (1Hz flashing)
|
||||
*/
|
||||
|
||||
switch (led)
|
||||
{
|
||||
case 0:
|
||||
/* The steady state is OFF */
|
||||
|
||||
g_ncoff = true;
|
||||
|
||||
case 2:
|
||||
/* Turn the LED off */
|
||||
|
||||
PORTD &= ~(1 << 7);
|
||||
break;
|
||||
|
||||
case 1:
|
||||
/* The steady state is ON */
|
||||
|
||||
PORTD |= (1 << 7);
|
||||
g_ncoff = false;
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_led_off
|
||||
****************************************************************************/
|
||||
|
||||
void board_led_off(int led)
|
||||
{
|
||||
/* ON OFF
|
||||
* LED_STARTED 0 OFF ON (never happens)
|
||||
* LED_HEAPALLOCATE 0 OFF ON (never happens)
|
||||
* LED_IRQSENABLED 0 OFF ON (never happens)
|
||||
* LED_STACKCREATED 1 ON ON (never happens)
|
||||
* LED_INIRQ 2 OFF NC (momentary)
|
||||
* LED_SIGNAL 2 OFF NC (momentary)
|
||||
* LED_ASSERTION 2 OFF NC (momentary)
|
||||
* LED_PANIC 0 OFF ON (1Hz flashing)
|
||||
*/
|
||||
|
||||
switch (led)
|
||||
{
|
||||
case 2:
|
||||
/* If the "no-change" state is OFF, then turn the LED off */
|
||||
|
||||
if (g_ncoff)
|
||||
{
|
||||
PORTD &= ~(1 << 7);
|
||||
break;
|
||||
}
|
||||
|
||||
/* Otherwise, fall through to turn the LED ON */
|
||||
|
||||
case 0:
|
||||
case 1:
|
||||
/* Turn the LED on */
|
||||
|
||||
PORTD |= (1 << 7);
|
||||
break;
|
||||
|
||||
default:
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
Loading…
Reference in a new issue