boards/stm32: add support to STM32F401RC-RS485 board
The STM32F401RC-RS485 is a board with RS485 support, SD Card, buttons, leds, temperature sensor, adc and etc. Signed-off-by: Rodrigo Sim rcsim10@gmail.com
This commit is contained in:
Rodrigo Sim
Xiang Xiao
parent
d84aba8a42
commit
21ba49408c
14 changed files with 1329 additions and 0 deletions
|
|
@ -1604,6 +1604,16 @@ config ARCH_BOARD_NUCLEO_F401RE
|
||||||
This is a minimal configuration that supports low-level test of the
|
This is a minimal configuration that supports low-level test of the
|
||||||
Nucleo F401RE in the NuttX source tree.
|
Nucleo F401RE in the NuttX source tree.
|
||||||
|
|
||||||
|
config ARCH_BOARD_STM32F401RC_RS485
|
||||||
|
bool "STM32F401RC-RS485 Board"
|
||||||
|
depends on ARCH_CHIP_STM32F401RC
|
||||||
|
select ARCH_HAVE_LEDS
|
||||||
|
select ARCH_HAVE_BUTTONS
|
||||||
|
select ARCH_HAVE_IRQBUTTONS
|
||||||
|
---help---
|
||||||
|
This is a minimal configuration that supports low-level test of the
|
||||||
|
STM32F401RC-RS485 in the NuttX source tree.
|
||||||
|
|
||||||
config ARCH_BOARD_NUCLEO_F410RB
|
config ARCH_BOARD_NUCLEO_F410RB
|
||||||
bool "STM32F410 Nucleo F410RB"
|
bool "STM32F410 Nucleo F410RB"
|
||||||
depends on ARCH_CHIP_STM32F410RB
|
depends on ARCH_CHIP_STM32F410RB
|
||||||
|
|
@ -3144,6 +3154,7 @@ config ARCH_BOARD
|
||||||
default "nucleo-f303ze" if ARCH_BOARD_NUCLEO_F303ZE
|
default "nucleo-f303ze" if ARCH_BOARD_NUCLEO_F303ZE
|
||||||
default "nucleo-f334r8" if ARCH_BOARD_NUCLEO_F334R8
|
default "nucleo-f334r8" if ARCH_BOARD_NUCLEO_F334R8
|
||||||
default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
|
default "nucleo-f4x1re" if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
|
||||||
|
default "stm32f401rc-rs485" if ARCH_BOARD_STM32F401RC_RS485
|
||||||
default "nucleo-f429zi" if ARCH_BOARD_NUCLEO_F429ZI
|
default "nucleo-f429zi" if ARCH_BOARD_NUCLEO_F429ZI
|
||||||
default "nucleo-f446re" if ARCH_BOARD_NUCLEO_F446RE
|
default "nucleo-f446re" if ARCH_BOARD_NUCLEO_F446RE
|
||||||
default "nucleo-f410rb" if ARCH_BOARD_NUCLEO_F410RB
|
default "nucleo-f410rb" if ARCH_BOARD_NUCLEO_F410RB
|
||||||
|
|
@ -3860,6 +3871,9 @@ endif
|
||||||
if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
|
if ARCH_BOARD_NUCLEO_F401RE || ARCH_BOARD_NUCLEO_F411RE
|
||||||
source "boards/arm/stm32/nucleo-f4x1re/Kconfig"
|
source "boards/arm/stm32/nucleo-f4x1re/Kconfig"
|
||||||
endif
|
endif
|
||||||
|
if ARCH_BOARD_STM32F401RC_RS485
|
||||||
|
source "boards/arm/stm32/stm32f401rc-rs485/Kconfig"
|
||||||
|
endif
|
||||||
if ARCH_BOARD_NUCLEO_F429ZI
|
if ARCH_BOARD_NUCLEO_F429ZI
|
||||||
source "boards/arm/stm32/nucleo-f429zi/Kconfig"
|
source "boards/arm/stm32/nucleo-f429zi/Kconfig"
|
||||||
endif
|
endif
|
||||||
|
|
|
||||||
21
boards/arm/stm32/stm32f401rc-rs485/CMakeLists.txt
Normal file
21
boards/arm/stm32/stm32f401rc-rs485/CMakeLists.txt
Normal file
|
|
@ -0,0 +1,21 @@
|
||||||
|
# ##############################################################################
|
||||||
|
# boards/arm/stm32/stm32f401rc-rs485/CMakeLists.txt
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
|
||||||
|
# license agreements. See the NOTICE file distributed with this work for
|
||||||
|
# additional information regarding copyright ownership. The ASF licenses this
|
||||||
|
# file to you under the Apache License, Version 2.0 (the "License"); you may not
|
||||||
|
# use this file except in compliance with the License. You may obtain a copy of
|
||||||
|
# the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations under
|
||||||
|
# the License.
|
||||||
|
#
|
||||||
|
# ##############################################################################
|
||||||
|
|
||||||
|
add_subdirectory(src)
|
||||||
8
boards/arm/stm32/stm32f401rc-rs485/Kconfig
Normal file
8
boards/arm/stm32/stm32f401rc-rs485/Kconfig
Normal file
|
|
@ -0,0 +1,8 @@
|
||||||
|
#
|
||||||
|
# For a description of the syntax of this configuration file,
|
||||||
|
# see the file kconfig-language.txt in the NuttX tools repository.
|
||||||
|
#
|
||||||
|
|
||||||
|
if ARCH_BOARD_STM32F401RC_RS485
|
||||||
|
|
||||||
|
endif # ARCH_BOARD_STM32F401RC_RS485
|
||||||
48
boards/arm/stm32/stm32f401rc-rs485/configs/nsh/defconfig
Normal file
48
boards/arm/stm32/stm32f401rc-rs485/configs/nsh/defconfig
Normal file
|
|
@ -0,0 +1,48 @@
|
||||||
|
#
|
||||||
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||||
|
#
|
||||||
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||||
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||||
|
# modifications.
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_FPU is not set
|
||||||
|
# CONFIG_NSH_ARGCAT is not set
|
||||||
|
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
|
||||||
|
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||||
|
# CONFIG_NSH_DISABLE_PS is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
CONFIG_ARCH_BOARD="stm32f401rc-rs485"
|
||||||
|
CONFIG_ARCH_BOARD_STM32F401RC_RS485=y
|
||||||
|
CONFIG_ARCH_BUTTONS=y
|
||||||
|
CONFIG_ARCH_CHIP="stm32"
|
||||||
|
CONFIG_ARCH_CHIP_STM32=y
|
||||||
|
CONFIG_ARCH_CHIP_STM32F401RC=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=2048
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=8499
|
||||||
|
CONFIG_BUILTIN=y
|
||||||
|
CONFIG_HAVE_CXX=y
|
||||||
|
CONFIG_HAVE_CXXINITIALIZE=y
|
||||||
|
CONFIG_INIT_ENTRYPOINT="nsh_main"
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_NSH_BUILTIN_APPS=y
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_LINELEN=64
|
||||||
|
CONFIG_NSH_READLINE=y
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
CONFIG_RAM_SIZE=98304
|
||||||
|
CONFIG_RAM_START=0x20000000
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
CONFIG_SPI=y
|
||||||
|
CONFIG_START_DAY=5
|
||||||
|
CONFIG_START_MONTH=5
|
||||||
|
CONFIG_START_YEAR=2014
|
||||||
|
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||||
|
CONFIG_STM32_OTGFS=y
|
||||||
|
CONFIG_STM32_PWR=y
|
||||||
|
CONFIG_STM32_USART2=y
|
||||||
|
CONFIG_SYSTEM_NSH=y
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_USART2_SERIAL_CONSOLE=y
|
||||||
401
boards/arm/stm32/stm32f401rc-rs485/include/board.h
Normal file
401
boards/arm/stm32/stm32f401rc-rs485/include/board.h
Normal file
|
|
@ -0,0 +1,401 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/include/board.h
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __BOARDS_ARM_STM32F401RC_RS485_INCLUDE_BOARD_H
|
||||||
|
#define __BOARDS_ARM_STM32F401RC_RS485_INCLUDE_BOARD_H
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
# include <stdint.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Clocking *****************************************************************/
|
||||||
|
|
||||||
|
/* The STM32F401RC-RS485 supports both HSE and LSE crystals (X2 and X3).
|
||||||
|
* However, as shipped, the X2 and X3 crystals are not populated.
|
||||||
|
* Therefore the Nucleo-F401RE will need to run off the 16MHz HSI clock.
|
||||||
|
*
|
||||||
|
* System Clock source : PLL (HSI)
|
||||||
|
* SYSCLK(Hz) : 84000000 Determined by PLL
|
||||||
|
* configuration
|
||||||
|
* HCLK(Hz) : 84000000 (STM32_RCC_CFGR_HPRE)
|
||||||
|
* AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE)
|
||||||
|
* APB1 Prescaler : 2 (STM32_RCC_CFGR_PPRE1)
|
||||||
|
* APB2 Prescaler : 1 (STM32_RCC_CFGR_PPRE2)
|
||||||
|
* HSI Frequency(Hz) : 16000000 (nominal)
|
||||||
|
* PLLM : 16 (STM32_PLLCFG_PLLM)
|
||||||
|
* PLLN : 336 (STM32_PLLCFG_PLLN)
|
||||||
|
* PLLP : 4 (STM32_PLLCFG_PLLP)
|
||||||
|
* PLLQ : 7 (STM32_PLLCFG_PPQ)
|
||||||
|
* Flash Latency(WS) : 5
|
||||||
|
* Prefetch Buffer : OFF
|
||||||
|
* Instruction cache : ON
|
||||||
|
* Data cache : ON
|
||||||
|
* Require 48MHz for USB OTG FS, : Enabled
|
||||||
|
* SDIO and RNG clock
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* HSI - 16 MHz RC factory-trimmed
|
||||||
|
* LSI - 32 KHz RC
|
||||||
|
* HSE - not installed
|
||||||
|
* LSE - not installed
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define STM32_HSI_FREQUENCY 16000000ul
|
||||||
|
#define STM32_LSI_FREQUENCY 32000
|
||||||
|
#define STM32_BOARD_USEHSI 1
|
||||||
|
|
||||||
|
/* Main PLL Configuration.
|
||||||
|
*
|
||||||
|
* Formulae:
|
||||||
|
*
|
||||||
|
* VCO input frequency = PLL input clock frequency / PLLM,
|
||||||
|
* 2 <= PLLM <= 63
|
||||||
|
* VCO output frequency = VCO input frequency × PLLN,
|
||||||
|
* 192 <= PLLN <= 432
|
||||||
|
* PLL output clock frequency = VCO frequency / PLLP,
|
||||||
|
* PLLP = 2, 4, 6, or 8
|
||||||
|
* USB OTG FS clock frequency = VCO frequency / PLLQ,
|
||||||
|
* 2 <= PLLQ <= 15
|
||||||
|
*
|
||||||
|
* We would like to have SYSYCLK=84MHz and we must have the USB clock= 48MHz.
|
||||||
|
* Some possible solutions include:
|
||||||
|
*
|
||||||
|
* PLLN=210 PLLM=5 PLLP=8 PLLQ=14 SYSCLK=84000000 OTGFS=48000000
|
||||||
|
* PLLN=210 PLLM=10 PLLP=4 PLLQ=7 SYSCLK=84000000 OTGFS=48000000
|
||||||
|
* PLLN=336 PLLM=8 PLLP=8 PLLQ=14 SYSCLK=84000000 OTGFS=48000000
|
||||||
|
* PLLN=336 PLLM=16 PLLP=4 PLLQ=7 SYSCLK=84000000 OTGFS=48000000
|
||||||
|
* PLLN=420 PLLM=10 PLLP=8 PLLQ=14 SYSCLK=84000000 OTGFS=48000000
|
||||||
|
* PLLN=420 PLLM=20 PLLP=4 PLLQ=7 SYSCLK=84000000 OTGFS=48000000
|
||||||
|
*
|
||||||
|
* We will configure like this
|
||||||
|
*
|
||||||
|
* PLL source is HSI
|
||||||
|
* PLL_VCO = (STM32_HSI_FREQUENCY / PLLM) * PLLN
|
||||||
|
* = (16,000,000 / 16) * 336
|
||||||
|
* = 336,000,000
|
||||||
|
* SYSCLK = PLL_VCO / PLLP
|
||||||
|
* = 336,000,000 / 4 = 84,000,000
|
||||||
|
* USB OTG FS and SDIO Clock
|
||||||
|
* = PLL_VCO / PLLQ
|
||||||
|
* = 336,000,000 / 7 = 48,000,000
|
||||||
|
*
|
||||||
|
* REVISIT: Trimming of the HSI is not yet supported.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(16)
|
||||||
|
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
|
||||||
|
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_4
|
||||||
|
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
|
||||||
|
|
||||||
|
#define STM32_SYSCLK_FREQUENCY 84000000ul
|
||||||
|
|
||||||
|
/* AHB clock (HCLK) is SYSCLK (84MHz) */
|
||||||
|
|
||||||
|
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
|
||||||
|
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
|
||||||
|
|
||||||
|
/* APB1 clock (PCLK1) is HCLK/2 (42MHz) */
|
||||||
|
|
||||||
|
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
|
||||||
|
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
|
||||||
|
|
||||||
|
/* Timers driven from APB1 will be twice PCLK1 */
|
||||||
|
|
||||||
|
/* REVISIT */
|
||||||
|
|
||||||
|
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
|
||||||
|
/* APB2 clock (PCLK2) is HCLK (84MHz) */
|
||||||
|
|
||||||
|
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */
|
||||||
|
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/1)
|
||||||
|
|
||||||
|
/* Timers driven from APB2 will be twice PCLK2 */
|
||||||
|
|
||||||
|
/* REVISIT */
|
||||||
|
|
||||||
|
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
|
||||||
|
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
|
||||||
|
* otherwise frequency is 2xAPBx.
|
||||||
|
* Note: TIM1,8 are on APB2, others on APB1
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* REVISIT */
|
||||||
|
|
||||||
|
#define BOARD_TIM1_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
#define BOARD_TIM2_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define BOARD_TIM3_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define BOARD_TIM4_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define BOARD_TIM5_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define BOARD_TIM6_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define BOARD_TIM7_FREQUENCY (2*STM32_PCLK1_FREQUENCY)
|
||||||
|
#define BOARD_TIM8_FREQUENCY (2*STM32_PCLK2_FREQUENCY)
|
||||||
|
|
||||||
|
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
|
||||||
|
* in order to avoid RX overrun/TX underrun errors due to delayed responses
|
||||||
|
* to service FIFOs in interrupt driven mode. These values have not been
|
||||||
|
* tuned!!!
|
||||||
|
*
|
||||||
|
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* REVISIT */
|
||||||
|
|
||||||
|
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
|
||||||
|
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
|
||||||
|
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* REVISIT */
|
||||||
|
|
||||||
|
#ifdef CONFIG_SDIO_DMA
|
||||||
|
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#else
|
||||||
|
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
|
||||||
|
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* REVISIT */
|
||||||
|
|
||||||
|
#ifdef CONFIG_SDIO_DMA
|
||||||
|
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#else
|
||||||
|
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
#define EXTERN extern "C"
|
||||||
|
extern "C"
|
||||||
|
{
|
||||||
|
#else
|
||||||
|
#define EXTERN extern
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __ASSEMBLY__ */
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* DMA Channel/Stream Selections ********************************************/
|
||||||
|
|
||||||
|
/* Stream selections are arbitrary for now but might become important in
|
||||||
|
* the future is we set aside more DMA channels/streams.
|
||||||
|
*
|
||||||
|
* SDIO DMA
|
||||||
|
* DMAMAP_SDIO_1 = Channel 4, Stream 3 <- may later be used by SPI DMA
|
||||||
|
* DMAMAP_SDIO_2 = Channel 4, Stream 6
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define DMAMAP_SDIO DMAMAP_SDIO_1
|
||||||
|
|
||||||
|
/* Need to VERIFY fwb */
|
||||||
|
|
||||||
|
#define DMACHAN_SPI1_RX DMAMAP_SPI1_RX_1
|
||||||
|
#define DMACHAN_SPI1_TX DMAMAP_SPI1_TX_1
|
||||||
|
#define DMACHAN_SPI2_RX DMAMAP_SPI2_RX
|
||||||
|
#define DMACHAN_SPI2_TX DMAMAP_SPI2_TX
|
||||||
|
|
||||||
|
/* Alternate function pin selections ****************************************/
|
||||||
|
|
||||||
|
/* USART1:
|
||||||
|
* RXD: PA10 CN9 pin 3, CN10 pin 33
|
||||||
|
* PB7 CN7 pin 21
|
||||||
|
* TXD: PA9 CN5 pin 1, CN10 pin 21
|
||||||
|
* PB6 CN5 pin 3, CN10 pin 17
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if 1
|
||||||
|
# define GPIO_USART1_RX GPIO_USART1_RX_1 /* PA10 */
|
||||||
|
# define GPIO_USART1_TX GPIO_USART1_TX_1 /* PA9 */
|
||||||
|
#else
|
||||||
|
# define GPIO_USART1_RX GPIO_USART1_RX_2 /* PB7 */
|
||||||
|
# define GPIO_USART1_TX GPIO_USART1_TX_2 /* PB6 */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* USART2:
|
||||||
|
* RXD: PA3 CN9 pin 1 (See SB13, 14, 62, 63). CN10 pin 37
|
||||||
|
* PD6
|
||||||
|
* TXD: PA2 CN9 pin 2(See SB13, 14, 62, 63). CN10 pin 35
|
||||||
|
* PD5
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_USART2_RX GPIO_USART2_RX_1 /* PA3 */
|
||||||
|
#define GPIO_USART2_TX GPIO_USART2_TX_1 /* PA2 */
|
||||||
|
#define GPIO_USART2_RTS GPIO_USART2_RTS_2
|
||||||
|
#define GPIO_USART2_CTS GPIO_USART2_CTS_2
|
||||||
|
|
||||||
|
/* USART6:
|
||||||
|
* RXD: PC7 CN5 pin2, CN10 pin 19
|
||||||
|
* PA12 CN10, pin 12
|
||||||
|
* TXD: PC6 CN10, pin 4
|
||||||
|
* PA11 CN10, pin 14
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_USART6_RX GPIO_USART6_RX_1 /* PC7 */
|
||||||
|
#define GPIO_USART6_TX GPIO_USART6_TX_1 /* PC6 */
|
||||||
|
|
||||||
|
/* UART RX DMA configurations */
|
||||||
|
|
||||||
|
#define DMAMAP_USART1_RX DMAMAP_USART1_RX_2
|
||||||
|
#define DMAMAP_USART6_RX DMAMAP_USART6_RX_2
|
||||||
|
|
||||||
|
/* I2C
|
||||||
|
*
|
||||||
|
* The optional _GPIO configurations allow the I2C driver to manually
|
||||||
|
* reset the bus to clear stuck slaves. They match the pin configuration,
|
||||||
|
* but are normally-high GPIOs.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2
|
||||||
|
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
|
||||||
|
#define GPIO_I2C1_SCL_GPIO \
|
||||||
|
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
|
||||||
|
#define GPIO_I2C1_SDA_GPIO \
|
||||||
|
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
|
||||||
|
|
||||||
|
#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
|
||||||
|
#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
|
||||||
|
#define GPIO_I2C2_SCL_GPIO \
|
||||||
|
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
|
||||||
|
#define GPIO_I2C2_SDA_GPIO \
|
||||||
|
(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
|
||||||
|
|
||||||
|
/* SPI
|
||||||
|
*
|
||||||
|
* There are sensors on SPI1, and SPI2 is connected to the FRAM.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
|
||||||
|
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
|
||||||
|
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1
|
||||||
|
|
||||||
|
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1
|
||||||
|
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_1
|
||||||
|
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_2
|
||||||
|
|
||||||
|
/* LEDs
|
||||||
|
*
|
||||||
|
* The Nucleo F401RE and F411RE boards provide a single user LED, LD2. LD2
|
||||||
|
* is the green LED connected to Arduino signal D13 corresponding to MCU I/O
|
||||||
|
* PA5 (pin 21) or PB13 (pin 34) depending on the STM32 target.
|
||||||
|
*
|
||||||
|
* - When the I/O is HIGH value, the LED is on.
|
||||||
|
* - When the I/O is LOW, the LED is off.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* LED index values for use with board_userled() */
|
||||||
|
|
||||||
|
#define BOARD_LD2 0
|
||||||
|
#define BOARD_NLEDS 1
|
||||||
|
|
||||||
|
/* LED bits for use with board_userled_all() */
|
||||||
|
|
||||||
|
#define BOARD_LD2_BIT (1 << BOARD_LD2)
|
||||||
|
|
||||||
|
/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
|
||||||
|
* defined. In that case, the usage by the board port is defined in
|
||||||
|
* include/board.h and src/sam_leds.c. The LEDs are used to encode OS-related
|
||||||
|
* events as follows when the red LED (PE24) is available:
|
||||||
|
*
|
||||||
|
* SYMBOL Meaning LD2
|
||||||
|
* ------------------- ----------------------- -----------
|
||||||
|
* LED_STARTED NuttX has been started OFF
|
||||||
|
* LED_HEAPALLOCATE Heap has been allocated OFF
|
||||||
|
* LED_IRQSENABLED Interrupts enabled OFF
|
||||||
|
* LED_STACKCREATED Idle stack created ON
|
||||||
|
* LED_INIRQ In an interrupt No change
|
||||||
|
* LED_SIGNAL In a signal handler No change
|
||||||
|
* LED_ASSERTION An assertion failed No change
|
||||||
|
* LED_PANIC The system has crashed Blinking
|
||||||
|
* LED_IDLE MCU is is sleep mode Not used
|
||||||
|
*
|
||||||
|
* Thus if LD2, NuttX has successfully booted and is, apparently, running
|
||||||
|
* normally. If LD2 is flashing at approximately 2Hz, then a fatal error
|
||||||
|
* has been detected and the system has halted.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define LED_STARTED 0
|
||||||
|
#define LED_HEAPALLOCATE 0
|
||||||
|
#define LED_IRQSENABLED 0
|
||||||
|
#define LED_STACKCREATED 1
|
||||||
|
#define LED_INIRQ 2
|
||||||
|
#define LED_SIGNAL 2
|
||||||
|
#define LED_ASSERTION 2
|
||||||
|
#define LED_PANIC 1
|
||||||
|
|
||||||
|
/* Buttons
|
||||||
|
*
|
||||||
|
* B1 USER:
|
||||||
|
* the user button is connected to the I/O PC13 (pin 2) of the STM32
|
||||||
|
* microcontroller.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BUTTON_USER 0
|
||||||
|
#define NUM_BUTTONS 1
|
||||||
|
|
||||||
|
#define BUTTON_USER_BIT (1 << BUTTON_USER)
|
||||||
|
|
||||||
|
#define GPIO_TIM2_CH1IN (GPIO_TIM2_CH1IN_1 | GPIO_PULLUP)
|
||||||
|
#define GPIO_TIM2_CH2IN (GPIO_TIM2_CH2IN_1 | GPIO_PULLUP)
|
||||||
|
|
||||||
|
#endif /* __BOARDS_ARM_STM32F401RC_RS485_INCLUDE_BOARD_H */
|
||||||
43
boards/arm/stm32/stm32f401rc-rs485/scripts/Make.defs
Normal file
43
boards/arm/stm32/stm32f401rc-rs485/scripts/Make.defs
Normal file
|
|
@ -0,0 +1,43 @@
|
||||||
|
############################################################################
|
||||||
|
# boards/arm/stm32/stm32f401rc-rs485/scripts/Make.defs
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
# contributor license agreements. See the NOTICE file distributed with
|
||||||
|
# this work for additional information regarding copyright ownership. The
|
||||||
|
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
# "License"); you may not use this file except in compliance with the
|
||||||
|
# License. You may obtain a copy of the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations
|
||||||
|
# under the License.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include $(TOPDIR)/.config
|
||||||
|
include $(TOPDIR)/tools/Config.mk
|
||||||
|
include $(TOPDIR)/arch/arm/src/armv7-m/Toolchain.defs
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ARCH_CHIP_STM32F401RC),y)
|
||||||
|
LDSCRIPT = ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||||
|
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
|
||||||
|
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
107
boards/arm/stm32/stm32f401rc-rs485/scripts/ld.script
Normal file
107
boards/arm/stm32/stm32f401rc-rs485/scripts/ld.script
Normal file
|
|
@ -0,0 +1,107 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/scripts/ld.script
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The STM32F401RC has 128Kb of FLASH beginning at address 0x0800:0000 and
|
||||||
|
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
|
||||||
|
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
|
||||||
|
* begin execution by jumping to the entry point in the 0x0800:0000 address
|
||||||
|
* range.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||||
|
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
EXTERN(_vectors)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
.init_section : {
|
||||||
|
_sinit = ABSOLUTE(.);
|
||||||
|
KEEP(*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
|
||||||
|
KEEP(*(.init_array .ctors))
|
||||||
|
_einit = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
.ARM.exidx : {
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
} > flash
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.);
|
||||||
|
|
||||||
|
/* The STM32F401RC has 128Kb of SRAM beginning at the following address */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.bss : {
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
35
boards/arm/stm32/stm32f401rc-rs485/src/CMakeLists.txt
Normal file
35
boards/arm/stm32/stm32f401rc-rs485/src/CMakeLists.txt
Normal file
|
|
@ -0,0 +1,35 @@
|
||||||
|
# ##############################################################################
|
||||||
|
# boards/arm/stm32/smt32f401rc-rs485/src/CMakeLists.txt
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more contributor
|
||||||
|
# license agreements. See the NOTICE file distributed with this work for
|
||||||
|
# additional information regarding copyright ownership. The ASF licenses this
|
||||||
|
# file to you under the Apache License, Version 2.0 (the "License"); you may not
|
||||||
|
# use this file except in compliance with the License. You may obtain a copy of
|
||||||
|
# the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations under
|
||||||
|
# the License.
|
||||||
|
#
|
||||||
|
# ##############################################################################
|
||||||
|
|
||||||
|
set(SRCS stm32_boot.c stm32_bringup.c)
|
||||||
|
|
||||||
|
if(CONFIG_ARCH_LEDS)
|
||||||
|
list(APPEND SRCS stm32_autoleds.c)
|
||||||
|
endif()
|
||||||
|
|
||||||
|
if(CONFIG_BOARDCTL)
|
||||||
|
list(APPEND SRCS stm32_appinit.c)
|
||||||
|
endif()
|
||||||
|
|
||||||
|
target_sources(board PRIVATE ${SRCS})
|
||||||
|
|
||||||
|
if(CONFIG_ARCH_CHIP_STM32F401RC)
|
||||||
|
set_property(GLOBAL PROPERTY LD_SCRIPT "${NUTTX_BOARD_DIR}/scripts/ld.script")
|
||||||
|
endif()
|
||||||
36
boards/arm/stm32/stm32f401rc-rs485/src/Make.defs
Normal file
36
boards/arm/stm32/stm32f401rc-rs485/src/Make.defs
Normal file
|
|
@ -0,0 +1,36 @@
|
||||||
|
############################################################################
|
||||||
|
# boards/arm/stm32/smt32f401rc-rs485/src/Make.defs
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
# contributor license agreements. See the NOTICE file distributed with
|
||||||
|
# this work for additional information regarding copyright ownership. The
|
||||||
|
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
# "License"); you may not use this file except in compliance with the
|
||||||
|
# License. You may obtain a copy of the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations
|
||||||
|
# under the License.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include $(TOPDIR)/Make.defs
|
||||||
|
|
||||||
|
CSRCS = stm32_boot.c stm32_bringup.c
|
||||||
|
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||||
|
CSRCS += stm32_autoleds.c
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_BOARDCTL),y)
|
||||||
|
CSRCS += stm32_appinit.c
|
||||||
|
endif
|
||||||
|
|
||||||
|
DEPPATH += --dep-path board
|
||||||
|
VPATH += :board
|
||||||
|
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)board$(DELIM)board
|
||||||
76
boards/arm/stm32/stm32f401rc-rs485/src/stm32_appinit.c
Normal file
76
boards/arm/stm32/stm32f401rc-rs485/src/stm32_appinit.c
Normal file
|
|
@ -0,0 +1,76 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/src/stm32_appinit.c
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <sys/types.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
#include "stm32f401rc-rs485.h"
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_app_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform application specific initialization. This function is never
|
||||||
|
* called directly from application code, but only indirectly via the
|
||||||
|
* (non-standard) boardctl() interface using the command BOARDIOC_INIT.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||||
|
* implementation without modification. The argument has no
|
||||||
|
* meaning to NuttX; the meaning of the argument is a contract
|
||||||
|
* between the board-specific initialization logic and the
|
||||||
|
* matching application logic. The value could be such things as a
|
||||||
|
* mode enumeration value, a set of DIP switch switch settings, a
|
||||||
|
* pointer to configuration data read from a file or serial FLASH,
|
||||||
|
* or whatever you would like to do with it. Every implementation
|
||||||
|
* should accept zero/NULL as a default configuration.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||||
|
* any failure to indicate the nature of the failure.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int board_app_initialize(uintptr_t arg)
|
||||||
|
{
|
||||||
|
#ifdef CONFIG_BOARD_LATE_INITIALIZE
|
||||||
|
return OK;
|
||||||
|
#else
|
||||||
|
/* Perform board initialization here */
|
||||||
|
|
||||||
|
return stm32_bringup();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
81
boards/arm/stm32/stm32f401rc-rs485/src/stm32_autoleds.c
Normal file
81
boards/arm/stm32/stm32f401rc-rs485/src/stm32_autoleds.c
Normal file
|
|
@ -0,0 +1,81 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/src/stm32_autoleds.c
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
|
||||||
|
#include "chip.h"
|
||||||
|
#include "arm_internal.h"
|
||||||
|
#include "stm32.h"
|
||||||
|
#include "stm32f401rc-rs485.h"
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_LEDS
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_autoled_initialize
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void board_autoled_initialize(void)
|
||||||
|
{
|
||||||
|
/* Configure LD2 GPIO for output */
|
||||||
|
|
||||||
|
stm32_configgpio(GPIO_LED1);
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_autoled_on
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void board_autoled_on(int led)
|
||||||
|
{
|
||||||
|
if (led == 1)
|
||||||
|
{
|
||||||
|
stm32_gpiowrite(GPIO_LED1, true);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_autoled_off
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void board_autoled_off(int led)
|
||||||
|
{
|
||||||
|
if (led == 1)
|
||||||
|
{
|
||||||
|
stm32_gpiowrite(GPIO_LED1, false);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif /* CONFIG_ARCH_LEDS */
|
||||||
85
boards/arm/stm32/stm32f401rc-rs485/src/stm32_boot.c
Normal file
85
boards/arm/stm32/stm32f401rc-rs485/src/stm32_boot.c
Normal file
|
|
@ -0,0 +1,85 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/src/stm32_boot.c
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/arch.h>
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include "arm_internal.h"
|
||||||
|
#include "stm32f401rc-rs485.h"
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_boardinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* All STM32 architectures must provide the following entry point.
|
||||||
|
* This entry point is called early in the initialization -- after all
|
||||||
|
* memory has been configured and mapped but before any devices have been
|
||||||
|
* initialized.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void stm32_boardinitialize(void)
|
||||||
|
{
|
||||||
|
/* Configure on-board LEDs if LED support has been selected. */
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_LEDS
|
||||||
|
board_autoled_initialize();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_late_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
|
||||||
|
* initialization call will be performed in the boot-up sequence to a
|
||||||
|
* function called board_late_initialize(). board_late_initialize() will
|
||||||
|
* be called immediately after up_initialize() is called and just before
|
||||||
|
* the initial application is started. This additional initialization
|
||||||
|
* phase may be used, for example, to initialize board-specific device
|
||||||
|
* drivers.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_BOARD_LATE_INITIALIZE
|
||||||
|
void board_late_initialize(void)
|
||||||
|
{
|
||||||
|
/* Perform board initialization here instead of from the
|
||||||
|
* board_app_initialize().
|
||||||
|
*/
|
||||||
|
|
||||||
|
stm32_bringup();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
65
boards/arm/stm32/stm32f401rc-rs485/src/stm32_bringup.c
Normal file
65
boards/arm/stm32/stm32f401rc-rs485/src/stm32_bringup.c
Normal file
|
|
@ -0,0 +1,65 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/src/stm32_bringup.c
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <syslog.h>
|
||||||
|
#include <errno.h>
|
||||||
|
|
||||||
|
#include <nuttx/arch.h>
|
||||||
|
|
||||||
|
#include <stm32.h>
|
||||||
|
#include <stm32_uart.h>
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include "stm32f401rc-rs485.h"
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_bringup
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecture-specific initialization
|
||||||
|
*
|
||||||
|
* CONFIG_BOARD_LATE_INITIALIZE=y :
|
||||||
|
* Called from board_late_initialize().
|
||||||
|
*
|
||||||
|
* CONFIG_BOARD_LATE_INITIALIZE=n && CONFIG_BOARDCTL=y :
|
||||||
|
* Called from the NSH library
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int stm32_bringup(void)
|
||||||
|
{
|
||||||
|
int ret = OK;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
309
boards/arm/stm32/stm32f401rc-rs485/src/stm32f401rc-rs485.h
Normal file
309
boards/arm/stm32/stm32f401rc-rs485/src/stm32f401rc-rs485.h
Normal file
|
|
@ -0,0 +1,309 @@
|
||||||
|
/****************************************************************************
|
||||||
|
* boards/arm/stm32/stm32f401rc-rs485/src/stm32f401rc-rs485.h
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __BOARDS_ARM_STM32_STM32F401RC_RS485_SRC_STM32F401RC_RS485_H
|
||||||
|
#define __BOARDS_ARM_STM32_STM32F401RC_RS485_SRC_STM32F401RC_RS485_H
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
#include <nuttx/compiler.h>
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Configuration ************************************************************/
|
||||||
|
|
||||||
|
#define HAVE_MMCSD 1
|
||||||
|
#if !defined(CONFIG_STM32_SDIO) || !defined(CONFIG_MMCSD) || \
|
||||||
|
!defined(CONFIG_MMCSD_SDIO)
|
||||||
|
# undef HAVE_MMCSD
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* LED. User LD2: the green LED is a user LED connected to Arduino signal
|
||||||
|
* D13 corresponding to MCU I/O PA5 (pin 21) or PB13 (pin 34) depending on
|
||||||
|
* the STM32 target.
|
||||||
|
*
|
||||||
|
* - When the I/O is HIGH value, the LED is on.
|
||||||
|
* - When the I/O is LOW, the LED is off.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_LED1 \
|
||||||
|
(GPIO_PORTC | GPIO_PIN0 | GPIO_OUTPUT_CLEAR | GPIO_OUTPUT | GPIO_PULLUP | \
|
||||||
|
GPIO_SPEED_50MHz)
|
||||||
|
|
||||||
|
/* Buttons
|
||||||
|
*
|
||||||
|
* B1 USER: the user button is connected to the I/O PC13 (pin 2) of the STM32
|
||||||
|
* microcontroller.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define MIN_IRQBUTTON BUTTON_USER
|
||||||
|
#define MAX_IRQBUTTON BUTTON_USER
|
||||||
|
#define NUM_IRQBUTTONS 1
|
||||||
|
|
||||||
|
#define GPIO_BTN_USER \
|
||||||
|
(GPIO_INPUT |GPIO_FLOAT |GPIO_EXTI | GPIO_PORTC | GPIO_PIN13)
|
||||||
|
|
||||||
|
/* The shield uses the following pins:
|
||||||
|
*
|
||||||
|
* +5V
|
||||||
|
* GND
|
||||||
|
* SERIAL_TX=PA_2 USER_BUTTON=PC_13
|
||||||
|
* SERIAL_RX=PA_3 LD2=PA_5
|
||||||
|
*
|
||||||
|
* Analog Digital
|
||||||
|
* A0=PA_0 USART2RX D0=PA_3 D8 =PA_9
|
||||||
|
* A1=PA_1 USART2TX D1=PA_2 D9 =PC_7
|
||||||
|
* A2=PA_4 D2=PA_10 WIFI_CS=D10=PB_6 SPI_CS
|
||||||
|
* A3=PB_0 WIFI_INT=D3=PB_3 D11=PA_7 SPI_MOSI
|
||||||
|
* A4=PC_1 SD_CS=D4=PB_5 D12=PA_6 SPI_MISO
|
||||||
|
* A5=PC_0 WIFI_EN=D5=PB_4 LD2=D13=PA_5 SPI_SCK
|
||||||
|
* LED2=D6=PB_10 I2C1_SDA=D14=PB_9 WIFI Probe
|
||||||
|
* D7=PA_8 I2C1_SCL=D15=PB_8 WIFI Probe
|
||||||
|
*
|
||||||
|
* mostly from: https://mbed.org/platforms/ST-Nucleo-F401RE/
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* SPI1 off */
|
||||||
|
|
||||||
|
#define GPIO_SPI1_MOSI_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
|
||||||
|
GPIO_PORTA | GPIO_PIN7)
|
||||||
|
#define GPIO_SPI1_MISO_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
|
||||||
|
GPIO_PORTA | GPIO_PIN6)
|
||||||
|
#define GPIO_SPI1_SCK_OFF (GPIO_INPUT | GPIO_PULLDOWN | \
|
||||||
|
GPIO_PORTA | GPIO_PIN5)
|
||||||
|
|
||||||
|
/* SSD1306 */
|
||||||
|
|
||||||
|
#define GPIO_SSD1306_CS (GPIO_OUTPUT|GPIO_OTYPER_PP(0)|GPIO_SPEED_2MHz|\
|
||||||
|
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN6)
|
||||||
|
|
||||||
|
#define GPIO_SSD1306_CMD (GPIO_OUTPUT|GPIO_OTYPER_PP(0)|GPIO_OSPEED_2MHz|\
|
||||||
|
GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN7)
|
||||||
|
|
||||||
|
#define GPIO_SSD1306_RST (GPIO_OUTPUT|GPIO_OTYPER_PP(0)|GPIO_SPEED_2MHz|\
|
||||||
|
GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN9)
|
||||||
|
|
||||||
|
/* MCP2551 */
|
||||||
|
|
||||||
|
#define GPIO_MCP2515_CS (GPIO_OUTPUT|GPIO_OTYPER_PP(0)|GPIO_SPEED_2MHz|\
|
||||||
|
GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
|
||||||
|
|
||||||
|
#define GPIO_MCP2515_IRQ (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTA|GPIO_PIN1)
|
||||||
|
|
||||||
|
#ifdef HAVE_MMCSD
|
||||||
|
# define GPIO_SPI_CS_SD_CARD_OFF \
|
||||||
|
(GPIO_INPUT | GPIO_PULLDOWN | GPIO_SPEED_2MHz | \
|
||||||
|
GPIO_PORTB | GPIO_PIN5)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAVE_MMCSD
|
||||||
|
# define GPIO_SPI_CS_SD_CARD \
|
||||||
|
(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | \
|
||||||
|
GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN5)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Devices on the onboard bus.
|
||||||
|
*
|
||||||
|
* Note that these are unshifted addresses.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define NUCLEO_I2C_OBDEV_LED 0x55
|
||||||
|
#define NUCLEO_I2C_OBDEV_HMC5883 0x1e
|
||||||
|
|
||||||
|
/* Itead Joystick Shield
|
||||||
|
*
|
||||||
|
* See http://imall.iteadstudio.com/im120417014.html for more information
|
||||||
|
* about this joystick.
|
||||||
|
*
|
||||||
|
* --------- ----------------- ---------------------------------
|
||||||
|
* ARDUINO ITEAD NUCLEO-F4x1
|
||||||
|
* PIN NAME SIGNAL SIGNAL
|
||||||
|
* --------- ----------------- ---------------------------------
|
||||||
|
* D3 Button E Output PB3
|
||||||
|
* D4 Button D Output PB5
|
||||||
|
* D5 Button C Output PB4
|
||||||
|
* D6 Button B Output PB10
|
||||||
|
* D7 Button A Output PA8
|
||||||
|
* D8 Button F Output PA9
|
||||||
|
* D9 Button G Output PC7
|
||||||
|
* A0 Joystick Y Output PA0 ADC1_0
|
||||||
|
* A1 Joystick X Output PA1 ADC1_1
|
||||||
|
* --------- ----------------- ---------------------------------
|
||||||
|
*
|
||||||
|
* All buttons are pulled on the shield. A sensed low value indicates
|
||||||
|
* when the button is pressed.
|
||||||
|
*
|
||||||
|
* NOTE: Button F cannot be used with the default USART1 configuration
|
||||||
|
* because PA9 is configured for USART1_RX by default. Use select
|
||||||
|
* different USART1 pins in the board.h file or select a different
|
||||||
|
* USART or select CONFIG_NUCLEO_F401RE_AJOY_MINBUTTONS which will
|
||||||
|
* eliminate all but buttons A, B, and C.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define ADC_XOUPUT 1 /* X output is on ADC channel 1 */
|
||||||
|
#define ADC_YOUPUT 0 /* Y output is on ADC channel 0 */
|
||||||
|
|
||||||
|
#define GPIO_BUTTON_A \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTA | GPIO_PIN8)
|
||||||
|
#define GPIO_BUTTON_B \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN10)
|
||||||
|
#define GPIO_BUTTON_C \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN4)
|
||||||
|
#define GPIO_BUTTON_D \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN5)
|
||||||
|
#define GPIO_BUTTON_E \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTB | GPIO_PIN3)
|
||||||
|
#define GPIO_BUTTON_F \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTA | GPIO_PIN9)
|
||||||
|
#define GPIO_BUTTON_G \
|
||||||
|
(GPIO_INPUT | GPIO_PULLUP |GPIO_EXTI | GPIO_PORTC | GPIO_PIN7)
|
||||||
|
|
||||||
|
/* Itead Joystick Signal interpretation:
|
||||||
|
*
|
||||||
|
* --------- ----------------------- ---------------------------
|
||||||
|
* BUTTON TYPE NUTTX ALIAS
|
||||||
|
* --------- ----------------------- ---------------------------
|
||||||
|
* Button A Large button A JUMP/BUTTON 3
|
||||||
|
* Button B Large button B FIRE/BUTTON 2
|
||||||
|
* Button C Joystick select button SELECT/BUTTON 1
|
||||||
|
* Button D Tiny Button D BUTTON 6
|
||||||
|
* Button E Tiny Button E BUTTON 7
|
||||||
|
* Button F Large Button F BUTTON 4
|
||||||
|
* Button G Large Button G BUTTON 5
|
||||||
|
* --------- ----------------------- ---------------------------
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_BUTTON_1 GPIO_BUTTON_C
|
||||||
|
#define GPIO_BUTTON_2 GPIO_BUTTON_B
|
||||||
|
#define GPIO_BUTTON_3 GPIO_BUTTON_A
|
||||||
|
#define GPIO_BUTTON_4 GPIO_BUTTON_F
|
||||||
|
#define GPIO_BUTTON_5 GPIO_BUTTON_G
|
||||||
|
#define GPIO_BUTTON_6 GPIO_BUTTON_D
|
||||||
|
#define GPIO_BUTTON_7 GPIO_BUTTON_E
|
||||||
|
|
||||||
|
#define GPIO_SELECT GPIO_BUTTON_1
|
||||||
|
#define GPIO_FIRE GPIO_BUTTON_2
|
||||||
|
#define GPIO_JUMP GPIO_BUTTON_3
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Global driver instances */
|
||||||
|
|
||||||
|
#ifdef CONFIG_STM32_SPI1
|
||||||
|
extern struct spi_dev_s *g_spi1;
|
||||||
|
#endif
|
||||||
|
#ifdef CONFIG_STM32_SPI2
|
||||||
|
extern struct spi_dev_s *g_spi2;
|
||||||
|
#endif
|
||||||
|
#ifdef HAVE_MMCSD
|
||||||
|
extern struct sdio_dev_s *g_sdio;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_bringup
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecture specific initialization
|
||||||
|
*
|
||||||
|
* CONFIG_BOARDCTL=y:
|
||||||
|
* If CONFIG_NSH_ARCHINITIALIZE=y:
|
||||||
|
* Called from the NSH library (or other application)
|
||||||
|
* Otherwise, assumed to be called from some other application.
|
||||||
|
*
|
||||||
|
* Otherwise CONFIG_BOARD_LATE_INITIALIZE=y:
|
||||||
|
* Called from board_late_initialize().
|
||||||
|
*
|
||||||
|
* Otherwise, bad news: Never called
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int stm32_bringup(void);
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_spidev_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to configure SPI chip select GPIO pins.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void stm32_spidev_initialize(void);
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_usbinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to setup USB-related GPIO pins.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void stm32_usbinitialize(void);
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_adc_setup
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Initialize ADC and register the ADC driver.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_ADC
|
||||||
|
int stm32_adc_setup(void);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_ajoy_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Initialize and register the button joystick driver
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_INPUT_AJOYSTICK
|
||||||
|
int board_ajoy_initialize(void);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: stm32_mcp2515initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Initialize and register the MCP2515 CAN driver.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_CAN_MCP2515
|
||||||
|
int stm32_mcp2515initialize(const char *devpath);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __BOARDS_ARM_STM32_STM32F401RC_RS485_SRC_STM32F401RC_RS485_H */
|
||||||
Loading…
Reference in a new issue