Add OV2640 camera support to test the SAMA5 ISI peripheral
This commit is contained in:
Gregory Nutt
parent
227cddccfa
commit
4d07c15932
17 changed files with 2380 additions and 12 deletions
11
COPYING
11
COPYING
|
|
@ -233,3 +233,14 @@ Documents/rss.gif
|
|||
* share alike – If you alter, transform, or build upon this work,
|
||||
you may distribute the resulting work only under the same or
|
||||
similar license to this one.
|
||||
|
||||
drivers/video/ov2640
|
||||
^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
WARNING: Some of the information in the data tables in this file came
|
||||
from other projects with conflicting licenses: Linux and ArduCAM. Those
|
||||
both have GPL licenses. I am not sure if it is proper or not to lift the
|
||||
content of those tables and still retain this BSD license. I am guessing
|
||||
so, but I am not copyright attorney so you should use this driver in
|
||||
products at your own risk.
|
||||
|
||||
|
|
@ -6179,4 +6179,7 @@
|
|||
(2013-12-8).
|
||||
* arch/arm/src/a1x/a1x_irq.c: A10 interrupt handling logic (partial)
|
||||
(2013-12-8).
|
||||
|
||||
* drivers/video/ov2640.c: An OV2640 camera driver that will be used to
|
||||
verify the SAMA5D3x-EK ISI peripheral (2013-1209).
|
||||
* sama5d3x-ek/ov2640 and src/sam_ov2640.c. Board logic to test the SAMA5D3
|
||||
ISI peripheral usign the OV2640 camera (2013-12-9).
|
||||
|
|
|
|||
|
|
@ -268,12 +268,12 @@
|
|||
/* PMC Programmable Clock Register (0,1,2) */
|
||||
|
||||
#define PMC_PCK_CSS_SHIFT (0) /* Bits 0-2: Master Clock Source Selection */
|
||||
#define PMC_PCK_CSS_MASK (7 << PMC_PCK_CSS_MASK)
|
||||
# define PMC_PCK_CSS_SLOW (0 << PMC_PCK_CSS_MASK) /* Slow Clock */
|
||||
# define PMC_PCK_CSS_MAIN (1 << PMC_PCK_CSS_MASK) /* Main Clock */
|
||||
# define PMC_PCK_CSS_PLLA (2 << PMC_PCK_CSS_MASK) /* PLLA Clock */
|
||||
# define PMC_PCK_CSS_UPLL (3 << PMC_PCK_CSS_MASK) /* UPLL Clock */
|
||||
# define PMC_PCK_CSS_MCK (4 << PMC_PCK_CSS_MASK) /* Master Clock */
|
||||
#define PMC_PCK_CSS_MASK (7 << PMC_PCK_CSS_SHIFT)
|
||||
# define PMC_PCK_CSS_SLOW (0 << PMC_PCK_CSS_SHIFT) /* Slow Clock */
|
||||
# define PMC_PCK_CSS_MAIN (1 << PMC_PCK_CSS_SHIFT) /* Main Clock */
|
||||
# define PMC_PCK_CSS_PLLA (2 << PMC_PCK_CSS_SHIFT) /* PLLA Clock */
|
||||
# define PMC_PCK_CSS_UPLL (3 << PMC_PCK_CSS_SHIFT) /* UPLL Clock */
|
||||
# define PMC_PCK_CSS_MCK (4 << PMC_PCK_CSS_SHIFT) /* Master Clock */
|
||||
#define PMC_PCK_PRES_SHIFT (4) /* Bits 4-6: Programmable Clock Prescaler */
|
||||
#define PMC_PCK_PRES_MASK (7 << PMC_PCK_PRES_SHIFT)
|
||||
# define PMC_PCK_PRES_DIV1 (0 << PMC_PCK_PRES_SHIFT) /* Selected clock */
|
||||
|
|
|
|||
|
|
@ -39,12 +39,20 @@
|
|||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <assert.h>
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip/sam_pinmap.h"
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "sam_pio.h"
|
||||
#include "sam_isi.h"
|
||||
|
||||
#include "sam_pck.h"
|
||||
|
||||
#ifdef CONFIG_SAMA5_ISI
|
||||
|
||||
/****************************************************************************
|
||||
|
|
@ -96,12 +104,13 @@ uint32_t sam_pck_configure(enum pckid_e pckid, uint32_t frequency)
|
|||
{
|
||||
uint32_t regval;
|
||||
uint32_t clkin;
|
||||
uint32_t actual;
|
||||
|
||||
/* Pick a clock source. Several are possible but only MCK or PLLA is
|
||||
* chosen here.
|
||||
*/
|
||||
|
||||
DEBUGASSERT(BOARD_MCK_FREQUENCY < BOARD_PLLA_FREQUENCY)
|
||||
DEBUGASSERT(BOARD_MCK_FREQUENCY < BOARD_PLLA_FREQUENCY);
|
||||
if (frequency <= BOARD_MCK_FREQUENCY ||
|
||||
frequency < BOARD_PLLA_FREQUENCY / 64)
|
||||
{
|
||||
|
|
@ -158,7 +167,7 @@ uint32_t sam_pck_configure(enum pckid_e pckid, uint32_t frequency)
|
|||
sdbg("ERROR: frequency cannot be realized.\n");
|
||||
sdbg(" frequency=%d MCK=%d\n",
|
||||
frequency, clkin);
|
||||
return -ERANGE;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Disable the programmable clock, configure the PCK output pin, then set
|
||||
|
|
|
|||
|
|
@ -213,4 +213,13 @@ config SAMA5D3X_EK_I2SCHAR_MINOR
|
|||
|
||||
endif # AUDIO_I2SCHAR && (SAMA5_SSC0 || SAMA5_SSC1)
|
||||
|
||||
if VIDEO_OV2640
|
||||
|
||||
config SAMA5_OV2640_DEMO
|
||||
bool "SAMA5 OV2640 camera demo"
|
||||
default n
|
||||
---help---
|
||||
Enable the SAMA5 OV2640 camera demo
|
||||
|
||||
endif # VIDEO_OV2640
|
||||
endif # ARCH_BOARD_SAMA5D3X_EK
|
||||
|
|
|
|||
|
|
@ -2638,6 +2638,7 @@ Configurations
|
|||
It executes an exhaustive OS test to verify a correct port of NuttX
|
||||
to the SAMA5D3-EK. Since it now passes that test, the configuration
|
||||
has little further use other than for reference.
|
||||
ov2640: A test of the SAMA5 ISI using an OV2640 camera.
|
||||
|
||||
There may be issues with some of these configurations. See the details
|
||||
before of the status of individual configurations.
|
||||
|
|
@ -3050,6 +3051,10 @@ Configurations
|
|||
STATUS:
|
||||
See the To-Do list below
|
||||
|
||||
ov2640:
|
||||
|
||||
A test of the SAMA5 ISI using an OV2640 camera.
|
||||
|
||||
To-Do List
|
||||
==========
|
||||
|
||||
|
|
|
|||
136
configs/sama5d3x-ek/ov2640/Make.defs
Normal file
136
configs/sama5d3x-ek/ov2640/Make.defs
Normal file
|
|
@ -0,0 +1,136 @@
|
|||
############################################################################
|
||||
# configs/sama5d3x-ek/ov2640/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
|
||||
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
|
||||
LDSCRIPT = isram.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
|
||||
LDSCRIPT = ddram.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
|
||||
LDSCRIPT = norflash.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
|
||||
# LDSCRIPT = cs1flash.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
|
||||
# LDSCRIPT = cs2flash.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
|
||||
# LDSCRIPT = cs3flash.ld
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||
HOSTEXEEXT = .exe
|
||||
else
|
||||
HOSTEXEEXT =
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native host tools
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
else
|
||||
# Linux/Cygwin-native host tools
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||
endif
|
||||
|
||||
706
configs/sama5d3x-ek/ov2640/defconfig
Normal file
706
configs/sama5d3x-ek/ov2640/defconfig
Normal file
|
|
@ -0,0 +1,706 @@
|
|||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_A1X is not set
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
CONFIG_ARCH_CHIP_SAMA5=y
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
# CONFIG_ARCH_ARM7TDMI is not set
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM4 is not set
|
||||
CONFIG_ARCH_CORTEXA5=y
|
||||
# CONFIG_ARCH_CORTEXA8 is not set
|
||||
CONFIG_ARCH_FAMILY="armv7-a"
|
||||
CONFIG_ARCH_CHIP="sama5"
|
||||
CONFIG_ARCH_HAVE_FPU=y
|
||||
CONFIG_ARCH_FPU=y
|
||||
# CONFIG_ARCH_HAVE_MPU is not set
|
||||
CONFIG_ARCH_HAVE_LOWVECTORS=y
|
||||
CONFIG_ARCH_LOWVECTORS=y
|
||||
CONFIG_PGTABLE_VADDR=0x20000000
|
||||
# CONFIG_ARCH_ROMPGTABLE is not set
|
||||
# CONFIG_PAGING is not set
|
||||
|
||||
#
|
||||
# ARMv7-A Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
|
||||
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
|
||||
|
||||
#
|
||||
# SAMA5 Configuration Options
|
||||
#
|
||||
# CONFIG_SAMA5_HAVE_UART0 is not set
|
||||
# CONFIG_SAMA5_HAVE_UART1 is not set
|
||||
# CONFIG_SAMA5_HAVE_CAN0 is not set
|
||||
# CONFIG_SAMA5_HAVE_CAN1 is not set
|
||||
CONFIG_SAMA5_HAVE_LCDC=y
|
||||
CONFIG_SAMA5_HAVE_GMAC=y
|
||||
# CONFIG_SAMA5_HAVE_EMAC is not set
|
||||
# CONFIG_SAMA5_HAVE_HSMCI2 is not set
|
||||
# CONFIG_SAMA5_HAVE_TC1 is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
|
||||
CONFIG_ARCH_CHIP_ATSAMA5D33=y
|
||||
# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
|
||||
|
||||
#
|
||||
# SAMA5 Peripheral Support
|
||||
#
|
||||
# CONFIG_SAMA5_DBGU is not set
|
||||
# CONFIG_SAMA5_PIT is not set
|
||||
# CONFIG_SAMA5_WDT is not set
|
||||
# CONFIG_SAMA5_RTC is not set
|
||||
CONFIG_SAMA5_HSMC=y
|
||||
# CONFIG_SAMA5_SMD is not set
|
||||
# CONFIG_SAMA5_USART0 is not set
|
||||
CONFIG_SAMA5_USART1=y
|
||||
# CONFIG_SAMA5_USART2 is not set
|
||||
# CONFIG_SAMA5_USART3 is not set
|
||||
# CONFIG_SAMA5_TWI0 is not set
|
||||
# CONFIG_SAMA5_TWI1 is not set
|
||||
# CONFIG_SAMA5_TWI2 is not set
|
||||
# CONFIG_SAMA5_HSMCI0 is not set
|
||||
# CONFIG_SAMA5_HSMCI1 is not set
|
||||
# CONFIG_SAMA5_SPI0 is not set
|
||||
# CONFIG_SAMA5_SPI1 is not set
|
||||
# CONFIG_SAMA5_TC0 is not set
|
||||
# CONFIG_SAMA5_PWM is not set
|
||||
# CONFIG_SAMA5_ADC is not set
|
||||
# CONFIG_SAMA5_DMAC0 is not set
|
||||
# CONFIG_SAMA5_DMAC1 is not set
|
||||
# CONFIG_SAMA5_UHPHS is not set
|
||||
# CONFIG_SAMA5_UDPHS is not set
|
||||
# CONFIG_SAMA5_GMAC is not set
|
||||
# CONFIG_SAMA5_LCDC is not set
|
||||
CONFIG_SAMA5_ISI=y
|
||||
# CONFIG_SAMA5_CAN0 is not set
|
||||
# CONFIG_SAMA5_CAN1 is not set
|
||||
# CONFIG_SAMA5_SHA is not set
|
||||
# CONFIG_SAMA5_AES is not set
|
||||
# CONFIG_SAMA5_TDES is not set
|
||||
# CONFIG_SAMA5_TRNG is not set
|
||||
# CONFIG_SAMA5_ARM is not set
|
||||
# CONFIG_SAMA5_FUSE is not set
|
||||
# CONFIG_SAMA5_MPDDRC is not set
|
||||
# CONFIG_SAMA5_PIO_IRQ is not set
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
CONFIG_SAMA5_EBICS0=y
|
||||
CONFIG_SAMA5_EBICS0_SIZE=134217728
|
||||
# CONFIG_SAMA5_EBICS0_SRAM is not set
|
||||
# CONFIG_SAMA5_EBICS0_PSRAM is not set
|
||||
# CONFIG_SAMA5_EBICS0_PROM is not set
|
||||
# CONFIG_SAMA5_EBICS0_EEPROM is not set
|
||||
# CONFIG_SAMA5_EBICS0_EPROM is not set
|
||||
# CONFIG_SAMA5_EBICS0_LCD is not set
|
||||
CONFIG_SAMA5_EBICS0_NOR=y
|
||||
# CONFIG_SAMA5_EBICS1 is not set
|
||||
# CONFIG_SAMA5_EBICS2 is not set
|
||||
# CONFIG_SAMA5_EBICS3 is not set
|
||||
# CONFIG_SAMA5_HAVE_NAND is not set
|
||||
# CONFIG_SAMA5_HAVE_PMECC is not set
|
||||
# CONFIG_SAMA5_BOOT_ISRAM is not set
|
||||
CONFIG_SAMA5_BOOT_CS0FLASH=y
|
||||
|
||||
#
|
||||
# Heap Configuration
|
||||
#
|
||||
CONFIG_SAMA5_ISRAM_HEAP=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_HAVE_MMU=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=49341
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x00304000
|
||||
CONFIG_RAM_VSTART=0x00304000
|
||||
CONFIG_RAM_SIZE=114688
|
||||
CONFIG_FLASH_START=0x10000000
|
||||
CONFIG_FLASH_VSTART=0x10000000
|
||||
CONFIG_FLASH_SIZE=134217728
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_SAMA5D3X_EK=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="sama5d3x-ek"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
# CONFIG_ARCH_BUTTONS is not set
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
CONFIG_SAMA5_OV2640_DEMO=y
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2013
|
||||
CONFIG_START_MONTH=7
|
||||
CONFIG_START_DAY=19
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="ov2640_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||
CONFIG_I2C=y
|
||||
# CONFIG_I2C_SLAVE is not set
|
||||
CONFIG_I2C_TRANSFER=y
|
||||
# CONFIG_I2C_WRITEREAD is not set
|
||||
# CONFIG_I2C_POLLED is not set
|
||||
# CONFIG_I2C_TRACE is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_I2S is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
CONFIG_VIDEO_DEVICES=y
|
||||
CONFIG_VIDEO_OV2640=y
|
||||
# CONFIG_OV2640_MULTIPLE is not set
|
||||
CONFIG_OV2640_I2CADDR=0x21
|
||||
CONFIG_OV2640_FREQUENCY=400000
|
||||
CONFIG_OV2640_I2CMODE=0
|
||||
CONFIG_OV2640_RGB565_COLORFMT=y
|
||||
# CONFIG_OV2640_YUV422_COLORFMT is not set
|
||||
# CONFIG_OV2640_JPEG is not set
|
||||
# CONFIG_OV2640_QCIF_RESOLUTION is not set
|
||||
# CONFIG_OV2640_QVGA_RESOLUTION is not set
|
||||
# CONFIG_OV2640_CIF_RESOLUTION is not set
|
||||
# CONFIG_OV2640_VGA_RESOLUTION is not set
|
||||
CONFIG_OV2640_SVGA_RESOLUTION=y
|
||||
# CONFIG_OV2640_XVGA_RESOLUTION is not set
|
||||
# CONFIG_OV2640_SXGA_RESOLUTION is not set
|
||||
# CONFIG_OV2640_UXGA_RESOLUTION is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
CONFIG_ARCH_NAND_HWECC=y
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART1=y
|
||||
|
||||
#
|
||||
# USART Configuration
|
||||
#
|
||||
CONFIG_USART1_ISUART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_USART1_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART1 Configuration
|
||||
#
|
||||
CONFIG_USART1_RXBUFSIZE=256
|
||||
CONFIG_USART1_TXBUFSIZE=256
|
||||
CONFIG_USART1_BAUD=115200
|
||||
CONFIG_USART1_BITS=8
|
||||
CONFIG_USART1_PARITY=0
|
||||
CONFIG_USART1_2STOP=0
|
||||
# CONFIG_USART1_IFLOWCONTROL is not set
|
||||
# CONFIG_USART1_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_NET is not set
|
||||
# CONFIG_ARCH_HAVE_PHY is not set
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
# CONFIG_FS_READABLE is not set
|
||||
# CONFIG_FS_WRITABLE is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_PROCFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=1
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# USB CDC/ACM Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# USB Composite Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
# CONFIG_SYSTEM_I2CTOOL is not set
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# NxPlayer media player library / command Line
|
||||
#
|
||||
# CONFIG_SYSTEM_NXPLAYER is not set
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# Stack Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# USB Mass Storage Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
76
configs/sama5d3x-ek/ov2640/setenv.sh
Executable file
76
configs/sama5d3x-ek/ov2640/setenv.sh
Executable file
|
|
@ -0,0 +1,76 @@
|
|||
#!/bin/bash
|
||||
# configs/samard3x-ek/ov2640/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
|
|
@ -144,6 +144,10 @@ ifeq ($(CONFIG_SAMA5_TSD),y)
|
|||
CSRCS += sam_touchscreen.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_VIDEO_OV2640),y)
|
||||
CSRCS += sam_ov2640.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
CSRCS += sam_autoleds.c
|
||||
else
|
||||
|
|
|
|||
79
configs/sama5d3x-ek/src/sam_ov2640.c
Normal file
79
configs/sama5d3x-ek/src/sam_ov2640.c
Normal file
|
|
@ -0,0 +1,79 @@
|
|||
/************************************************************************************
|
||||
* configs/sama5d3x-ek/src/sam_ov2640.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdlib.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include "sama5d3x-ek.h"
|
||||
|
||||
#if defined(CONFIG_SAMA5_ISI) && defined(CONFIG_SAMA5_OV2640_DEMO)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Data
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: ov2640_main
|
||||
*
|
||||
* Description:
|
||||
* Entry point for the OV2640 Camera Demo
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
int ov2640_main(int argc, char *argv[])
|
||||
{
|
||||
return EXIT_SUCCESS;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SAMA5_ISI && CONFIG_SAMA5_OV2640_DEMO */
|
||||
|
|
@ -259,7 +259,7 @@ menuconfig AUDIO_DEVICES
|
|||
bool "Audio Device Support"
|
||||
default n
|
||||
---help---
|
||||
This directory holds implementations of audio device drivers.
|
||||
Enable support for audio device drivers.
|
||||
This includes drivers for MP3, WMA and Ogg Vorbis encoding,
|
||||
decoding, as well as drivers for interfacing with external
|
||||
DSP chips to perform custom audio functions.
|
||||
|
|
@ -268,6 +268,16 @@ if AUDIO_DEVICES
|
|||
source drivers/audio/Kconfig
|
||||
endif # AUDIO_DEVICES
|
||||
|
||||
menuconfig VIDEO_DEVICES
|
||||
bool "Video Device Support"
|
||||
default n
|
||||
---help---
|
||||
Enable support for video device drivers.
|
||||
|
||||
if VIDEO_DEVICES
|
||||
source drivers/video/Kconfig
|
||||
endif # VIDEO_DEVICES
|
||||
|
||||
menuconfig BCH
|
||||
bool "Block-to-Character (BCH) Support"
|
||||
default n
|
||||
|
|
|
|||
|
|
@ -66,6 +66,7 @@ include spi$(DELIM)Make.defs
|
|||
include syslog$(DELIM)Make.defs
|
||||
include usbdev$(DELIM)Make.defs
|
||||
include usbhost$(DELIM)Make.defs
|
||||
include video$(DELIM)Make.defs
|
||||
include wireless$(DELIM)Make.defs
|
||||
|
||||
ifneq ($(CONFIG_NFILE_DESCRIPTORS),0)
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ config LIS331DL
|
|||
bool "ST LIS331DL device support"
|
||||
default n
|
||||
select I2C
|
||||
|
||||
|
||||
config I2C_LM75
|
||||
bool
|
||||
default y if LM75
|
||||
|
|
@ -22,7 +22,7 @@ config DEBUG_LM75
|
|||
bool "Enable LM-75 debug"
|
||||
default n
|
||||
depends on LM75
|
||||
|
||||
|
||||
config QENCODER
|
||||
bool "Qencoder"
|
||||
default n
|
||||
|
|
|
|||
117
drivers/video/Kconfig
Normal file
117
drivers/video/Kconfig
Normal file
|
|
@ -0,0 +1,117 @@
|
|||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
config VIDEO_OV2640
|
||||
bool "OV2640 camera chip"
|
||||
default n
|
||||
select I2C
|
||||
|
||||
if VIDEO_OV2640
|
||||
|
||||
config OV2640_MULTIPLE
|
||||
bool "Multiple OV2640 devices"
|
||||
default n
|
||||
---help---
|
||||
Build in support for multiple on-board OV2640 devices
|
||||
|
||||
config OV2640_I2CADDR
|
||||
hex "I2C address (7-bit)"
|
||||
default 0x21
|
||||
---help---
|
||||
OV2640 I2C address in 7-bit format
|
||||
|
||||
config OV2640_FREQUENCY
|
||||
int "I2C frequency"
|
||||
default 400000
|
||||
---help---
|
||||
OV2640 I2C frequency
|
||||
choice
|
||||
prompt "Color format"
|
||||
default OV2640_RGB565_COLORFMT
|
||||
|
||||
config OV2640_RGB565_COLORFMT
|
||||
bool "RGB565"
|
||||
|
||||
config OV2640_YUV422_COLORFMT
|
||||
bool "YUV422"
|
||||
|
||||
endchoice
|
||||
|
||||
config OV2640_JPEG
|
||||
bool "JPEG output format"
|
||||
default n
|
||||
---help---
|
||||
Select JPEG output format
|
||||
|
||||
choice
|
||||
prompt "JPEG resolution"
|
||||
default OV2640_JPEG_SVGA_RESOLUTION
|
||||
depends on OV2640_JPEG
|
||||
|
||||
config OV2640_JPEG_QCIF_RESOLUTION
|
||||
bool "QCIF (176x144)"
|
||||
|
||||
config OV2640_JPEG_QVGA_RESOLUTION
|
||||
bool "QVGA (320x240)"
|
||||
|
||||
config OV2640_JPEG_CIF_RESOLUTION
|
||||
bool "CIF (352x288)"
|
||||
|
||||
config OV2640_JPEG_VGA_RESOLUTION
|
||||
bool "VGA (640x480)"
|
||||
|
||||
config OV2640_JPEG_SVGA_RESOLUTION
|
||||
bool "SVGA (800x600)"
|
||||
|
||||
config OV2640_JPEG_XVGA_RESOLUTION
|
||||
bool "XVGA (1024x768)"
|
||||
|
||||
config OV2640_JPEG_SXVGA_RESOLUTION
|
||||
bool "SXVGA (1280x1024)"
|
||||
|
||||
config OV2640_JPEG_UXGA_RESOLUTION
|
||||
bool "UXVGA (1600x1200)"
|
||||
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output resolution"
|
||||
default OV2640_SVGA_RESOLUTION
|
||||
depends on !OV2640_JPEG
|
||||
|
||||
config OV2640_QCIF_RESOLUTION
|
||||
bool "QCIF (176x144)"
|
||||
|
||||
config OV2640_QVGA_RESOLUTION
|
||||
bool "QVGA (320x240)"
|
||||
|
||||
config OV2640_CIF_RESOLUTION
|
||||
bool "CIF (352x288)"
|
||||
|
||||
config OV2640_VGA_RESOLUTION
|
||||
bool "VGA (640x480)"
|
||||
|
||||
config OV2640_SVGA_RESOLUTION
|
||||
bool "SVGA (800x600)"
|
||||
|
||||
config OV2640_XVGA_RESOLUTION
|
||||
bool "XVGA (1024x768)"
|
||||
|
||||
config OV2640_SXGA_RESOLUTION
|
||||
bool "SXVGA (1280x1024)"
|
||||
|
||||
config OV2640_UXGA_RESOLUTION
|
||||
bool "UXVGA (1600x1200)"
|
||||
|
||||
endchoice
|
||||
|
||||
config OV2640_REGDEBUG
|
||||
bool "Register level debug output"
|
||||
default n
|
||||
depends on DEBUG
|
||||
---help---
|
||||
Enable details, register level debug output.
|
||||
|
||||
endif
|
||||
56
drivers/video/Make.defs
Normal file
56
drivers/video/Make.defs
Normal file
|
|
@ -0,0 +1,56 @@
|
|||
############################################################################
|
||||
# drivers/ov2640/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Include video drivers
|
||||
|
||||
ifeq ($(CONFIG_VIDEO_DEVICES),y)
|
||||
|
||||
# These video drivers depend on I2C support
|
||||
|
||||
ifeq ($(CONFIG_I2C),y)
|
||||
|
||||
ifeq ($(CONFIG_VIDEO_OV2640),y)
|
||||
CSRCS += ov2640.c
|
||||
endif
|
||||
|
||||
endif
|
||||
|
||||
# Include video driver build support
|
||||
|
||||
DEPPATH += --dep-path video
|
||||
VPATH += :video
|
||||
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)video}
|
||||
|
||||
endif
|
||||
1146
drivers/video/ov2640.c
Normal file
1146
drivers/video/ov2640.c
Normal file
File diff suppressed because it is too large
Load diff
Loading…
Reference in a new issue