nuttx/nuttx-update
1
2
Fork 1
Code Issues 1 Pull requests 1 Projects Releases Packages Wiki Activity Actions

Add LPC31 Kconfig

Browse source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5104 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-09-06 20:08:25 +00:00
parent 9d243baa0e
commit 595862c60f
55 changed files with 390 additions and 107 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

53
arch/Kconfig
View file

@ -119,11 +119,58 @@ config BOARD_LOOPSPERMSEC
is 100 seconds.
config DRAM_START
hex "DRAM start address"
hex "DRAM start physical address"
help
The physical start address of installed RAM.
The physical start address of installed RAM. Despite the naming,
this may be SDRAM or SRAM or any other RAM technology that support
program execution.
config DRAM_VSTART
hex "DRAM start virtual address"
depends on ARCH_HAVE_MMU
help
The virtual start address of installed RAM. Despite the naming,
this may be SDRAM or SRAM or any other RAM technology that support
program execution.
config DRAM_SIZE
int "DRAM size"
help
The size in bytes of the installed RAM.
The size in bytes of the installed RAM. Despite the naming,
this may be SDRAM or SRAM or any other RAM technology that support
program execution.
comment "Boot options"
choice
prompt "LPC31xx Boot Mode"
default BOOT_RUNFROMFLASH
config BOOT_RUNFROMEXTSRAM
bool "Run from external SRAM"
---help---
Some configuration support booting and running from external SRAM.
config BOOT_RUNFROMFLASH
bool "Boot and run from flash"
---help---
Most configurations support XIP operation from FLASH but must copy
initialized .data sections to RAM. (This is the default).
config BOOT_RUNFROMISRAM
bool "Boot and run from internal SRAM"
---help---
Some configuration support booting and running from internal SRAM.
config BOOT_RUNFROMSDRAM
bool "Boot and run from external SDRAM"
---help---
Some configuration support booting and running from external SDRAM.
config BOOT_COPYTORAM
bool "Boot from FLASH but copy to ram"
---help---
Some configurations boot in FLASH but copy themselves entirely into
RAM for better performance.
endchoice

107
arch/arm/Kconfig
View file

@ -11,6 +11,7 @@ choice
config ARCH_CHIP_C5471
bool "TMS320 C5471"
select ARCH_ARM7TDMI
select ARCH_HAVE_LOWVECTORS
---help---
TI TMS320 C5471, A180, or DA180 (ARM7TDMI)
@ -18,12 +19,15 @@ config ARCH_CHIP_CALYPSO
bool "Calypso"
select ARCH_ARM7TDMI
select ARCH_HAVE_HEAP2
select ARCH_HAVE_LOWVECTORS
---help---
TI Calypso-based cell phones (ARM7TDMI)
config ARCH_CHIP_DM320
bool "TMS320 DM320"
select ARCH_ARM926EJS
select ARCH_HAVE_LOWVECTORS
select ARCH_HAVE_MMU
---help---
TI DMS320 DM320 (ARM926EJS)
@ -31,70 +35,81 @@ config ARCH_CHIP_IMX
bool "Freescale iMX"
select ARCH_ARM920T
select ARCH_HAVE_HEAP2
select ARCH_HAVE_LOWVECTORS
select ARCH_HAVE_MMU
---help---
Freescale iMX architectures (ARM920T)
config ARCH_CHIP_KINETIS
bool "Freescale Kinetis"
select ARCH_CORTEXM
select ARCH_CORTEXM4
select ARCH_HAVE_MPU
---help---
Freescale Kinetis Architectures (ARM Cortex-M4)
config ARCH_CHIP_LM3S
bool "TI Stellaris"
select ARCH_CORTEXM
select ARCH_CORTEXM3
select ARCH_HAVE_MPU
---help---
TI Stellaris LMS3 architecutres (ARM Cortex-M3)
config ARCH_CHIP_LPC17XX
bool "NXP LPC17xx"
select ARCH_CORTEXM
select ARCH_CORTEXM3
select ARCH_HAVE_MPU
---help---
NXP LPC17xx architectures (ARM Cortex-M3)
config ARCH_CHIP_LPC214X
bool "NXP LPC214x"
select ARCH_ARM7TDMI
select ARCH_HAVE_LOWVECTORS
---help---
NXP LPC2145x architectures (ARM7TDMI)
config ARCH_CHIP_LPC2378
bool "NXP LPC2378"
select ARCH_ARM7TDMI
select ARCH_HAVE_LOWVECTORS
---help---
NXP LPC2145x architectures (ARM7TDMI)
config ARCH_CHIP_LPC31XX
bool "NXP LPC31XX"
select ARCH_ARM926EJS
select ARCH_HAVE_LOWVECTORS
select ARCH_HAVE_MMU
---help---
NPX LPC31XX architectures (ARM926EJS).
config ARCH_CHIP_LPC43XX
bool "NXP LPC43XX"
select ARCH_CORTEXM4
select ARCH_HAVE_CMNVECTOR
select ARMV7M_CMNVECTOR
select ARCH_HAVE_MPU
---help---
NPX LPC43XX architectures (ARM Cortex-M4).
config ARCH_CHIP_SAM3U
bool "Atmel AT91SAM3U"
select ARCH_CORTEXM
select ARCH_CORTEXM3
select ARCH_HAVE_MPU
---help---
Atmel AT91SAM3U architectures (ARM Cortex-M3)
config ARCH_CHIP_STM32
bool "STMicro STM32"
select ARCH_HAVE_CMNVECTOR
select ARCH_HAVE_MPU
---help---
STMicro STM32 architectures (ARM Cortex-M3/4).
config ARCH_CHIP_STR71X
bool "STMicro STR71x"
select ARCH_ARM7TDMI
select ARCH_HAVE_LOWVECTORS
---help---
STMicro STR71x architectures (ARM7TDMI).
@ -115,26 +130,6 @@ config ARCH_CORTEXM3
config ARCH_CORTEXM4
bool
config ARMV7M_CMNVECTOR
bool
default n
config ARCH_FPU
bool "FPU support"
default y
depends on ARCH_CORTEXM4
---help---
Build in support for the ARM Cortex-M4 Floating Point Unit (FPU).
Check your chip specifications first; not all Cortex-M4 chips support the FPU.
config ARMV7M_MPU
bool "MPU support"
default n
depends on ARCH_CORTEXM3 || ARCH_CORTEXM4
---help---
Build in support for the ARM Cortex-M3/4 Memory Protection Unit (MPU).
Check your chip specifications first; not all Cortex-M3/4 chips support the MPU.
config ARCH_FAMILY
string
default "arm" if ARCH_ARM7TDMI || ARCH_ARM926EJS || ARCH_ARM920T
@ -157,6 +152,70 @@ config ARCH_CHIP
default "stm32" if ARCH_CHIP_STM32
default "str71x" if ARCH_CHIP_STR71X
config ARMV7M_CMNVECTOR
bool "Use common ARMv7-M vectors"
default n
depends on ARCH_HAVE_CMNVECTOR
---help---
Some architectures use their own, built-in vector logic. Some use only
the common vector logic. Some can use either their own built-in vector
logic or the common vector logic. This applies only to ARMv7-M
architectures.
config ARCH_FPU
bool "FPU support"
default y
depends on ARCH_CORTEXM4
---help---
Build in support for the ARM Cortex-M4 Floating Point Unit (FPU).
Check your chip specifications first; not all Cortex-M4 chips support the FPU.
config ARCH_HAVE_MPU
bool
config ARMV7M_MPU
bool "MPU support"
default n
depends on ARCH_HAVE_MPU
---help---
Build in support for the ARM Cortex-M3/4 Memory Protection Unit (MPU).
Check your chip specifications first; not all Cortex-M3/4 chips support the MPU.
config ARCH_HAVE_LOWVECTORS
bool
config ARCH_LOWVECTORS
bool "Vectors in low memory"
default n
depends on ARCH_HAVE_LOWVECTORS
---help---
Support ARM vectors in low memory.
config ARCH_HAVE_MMU
bool
config PGTABLE_VADDR
hex "Page table virtual address"
depends on ARCH_HAVE_MMU
---help---
Page table virtual address (might be defined in the board.h file). Not
applicable to all architectures.
config ARCH_ROMPGTABLE
bool "ROM page table"
default n
depends on ARCH_HAVE_MMU
---help---
Support a fixed memory mapping use a (read-only) page table in ROM/FLASH.
config PAGING
bool "On-demand paging"
default n
depends on ARCH_HAVE_MMU && !ARCH_ROMPGTABLE
---help---
If set =y in your configation file, this setting will enable the on-demand
paging feature as described in http://www.nuttx.org/NuttXDemandPaging.html.
config ARCH_LEDS
bool "Use board LEDs to show state"
default y

2
arch/arm/src/lpc17xx/Kconfig
View file

@ -484,7 +484,7 @@ endmenu
menu "USB device driver options"
config USBDEV_EP0_MAXSIZE
config LPC17_USBDEV_EP0_MAXSIZE
int "EP0 Max packet size"
depends on LPC17_USBDEV
default 64

12
arch/arm/src/lpc17xx/lpc17_usbdev.c
View file

@ -69,8 +69,8 @@
/* Configuration ***************************************************************/
#ifndef CONFIG_USBDEV_EP0_MAXSIZE
# define CONFIG_USBDEV_EP0_MAXSIZE 64
#ifndef CONFIG_LPC17_USBDEV_EP0_MAXSIZE
# define CONFIG_LPC17_USBDEV_EP0_MAXSIZE 64
#endif
#ifndef CONFIG_USBDEV_MAXPOWER
@ -1369,8 +1369,8 @@ static inline void lpc17_ep0configure(struct lpc17_usbdev_s *priv)
/* EndPoint 0 initialization */
lpc17_eprealize(&priv->eplist[LPC17_CTRLEP_OUT], 0, CONFIG_USBDEV_EP0_MAXSIZE);
lpc17_eprealize(&priv->eplist[LPC17_CTRLEP_IN], 1, CONFIG_USBDEV_EP0_MAXSIZE);
lpc17_eprealize(&priv->eplist[LPC17_CTRLEP_OUT], 0, CONFIG_LPC17_USBDEV_EP0_MAXSIZE);
lpc17_eprealize(&priv->eplist[LPC17_CTRLEP_IN], 1, CONFIG_LPC17_USBDEV_EP0_MAXSIZE);
/* Enable EP0 interrupts (not DMA) */
@ -1930,7 +1930,7 @@ static inline void lpc17_ep0dataoutinterrupt(struct lpc17_usbdev_s *priv)
case LPC17_EP0SHORTWRITE:
{
priv->ep0state = LPC17_EP0STATUSOUT;
pktlen = lpc17_epread(LPC17_EP0_OUT, NULL, CONFIG_USBDEV_EP0_MAXSIZE);
pktlen = lpc17_epread(LPC17_EP0_OUT, NULL, CONFIG_LPC17_USBDEV_EP0_MAXSIZE);
if (LPC17_READOVERRUN(pktlen))
{
lpc17_ep0setup(priv);
@ -1941,7 +1941,7 @@ static inline void lpc17_ep0dataoutinterrupt(struct lpc17_usbdev_s *priv)
case LPC17_EP0SHORTWRSENT:
{
priv->ep0state = LPC17_EP0REQUEST;
pktlen = lpc17_epread(LPC17_EP0_OUT, NULL, CONFIG_USBDEV_EP0_MAXSIZE);
pktlen = lpc17_epread(LPC17_EP0_OUT, NULL, CONFIG_LPC17_USBDEV_EP0_MAXSIZE);
if (LPC17_READOVERRUN(pktlen))
{
lpc17_ep0setup(priv);

180
arch/arm/src/lpc31xx/Kconfig
View file

@ -2,3 +2,183 @@
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
choice
prompt "LPC31 Chip Selection"
default ARCH_CHIP_LPC3131
depends on ARCH_CHIP_LPC31XX
config ARCH_CHIP_LPC3130
bool "LPC3130"
config ARCH_CHIP_LPC3131
bool "LPC3131"
config ARCH_CHIP_LPC3152
bool "LPC3152"
config ARCH_CHIP_LPC3154
bool "LPC3154"
endchoice
choice
prompt "Toolchain Selection"
default LPC31_CODESOURCERYW
depends on ARCH_CHIP_LPC31XX
config LPC31_CODESOURCERYW
bool "CodeSourcery for Windows"
config LPC31_CODESOURCERYL
bool "CodeSourcery for Linux"
config LPC31_DEVKITARM
bool "DevkitARM (Windows)"
config LPC31_BUILDROOT
bool "NuttX buildroot (Cygwin or Linux)"
endchoice
menu "LPC31xx Memory Mapping"
config LPC31_EXTNAND
bool "Map external NAND"
default n
---help---
Map external NAND into the memory map.
config LPC31_EXTSDRAM
bool "Map external SDRAM"
default n
---help---
Map external SDRAM into the memory map.
config LPC31_EXTSDRAMHEAP
bool "Add external SDRAM to the heap"
default y
depends on LPC31_EXTSDRAM
---help---
Add external SDRAM into the heap.
config LPC31_EXTSDRAMSIZE
int "External SDRAM size"
depends on LPC31_EXTSDRAM
---help---
Size of the external SDRAM.
config LPC31_EXTSRAM0
bool "Map external SRAM0"
default n
---help---
Map external SRAM0 into the memory map.
config LPC31_EXTSRAM0HEAP
bool "Add external SRAM0 to the heap"
default y
depends on LPC31_EXTSRAM0
---help---
Add external SRAM0 into the heap.
config LPC31_EXTSRAM0SIZE
int "External SRAM size"
depends on LPC31_EXTSRAM0
---help---
Size of the external SRAM.
config LPC31_EXTSRAM1
bool "Map external SRAM0"
default n
---help---
Map external SRAM1 into the memory map.
config LPC31_EXTSRAM1HEAP
bool "Add external SRAM1 to the heap"
default y
depends on LPC31_EXTSRAM1
---help---
Add external SRAM1 into the heap.
config LPC31_EXTSRAM1SIZE
int "External SRAM1 size"
depends on LPC31_EXTSRAM1
---help---
Size of the external SRAM1.
endmenu
menu "LPC31xx Peripheral Support"
config LPC31_UART
bool "UART"
default n
select ARCH_HAS_UART
endmenu
menu "LPC31xx UART Configuration"
depends on LPC31_UART
config LPC31_UART_DIVADDVAL
int "BAUD pre-scaler divisor"
---help---
BAUD pre-scaler divisor
config LPC31_UART_DIVISOR
int "BAUD divisor"
---help---
BAUD divisor
config LPC31_UART_MULVAL
int "BAUD multiplier"
---help---
BAUD multiplier
endmenu
menu "USB device driver options"
config LPC31_USBDEV_EP0_MAXSIZE
int "EP0 Max packet size"
depends on USBDEV
default 64
---help---
Endpoint 0 maximum packet size. Default: 64
config LPC31_USBDEV_FRAME_INTERRUPT
bool "USB frame interrupt"
depends on USBDEV
default n
---help---
Handle USB Start-Of-Frame events. Enable reading SOF from interrupt
handler vs. simply reading on demand. Probably a bad idea... Unless
there is some issue with sampling the SOF from hardware asynchronously.
config LPC31_USBDEV_DMA
bool "Enable USB device DMA"
depends on USBDEV
default n
---help---
Enable lpc31xx-specific DMA support
config LPC31_USBDEV_REGDEBUG
bool "Register level debug"
depends on USBDEV && DEBUG
default n
---help---
Output detailed register-level USB device debug information. Requires also DEBUG.
endmenu
menu "SPI device driver options"
config LPC31_SPI_REGDEBUG
bool "Register level debug"
depends on DEBUG
default n
---help---
Output detailed register-level SPI device debug information. Requires also DEBUG.
endmenu

2
arch/arm/src/lpc31xx/Make.defs
View file

@ -2,7 +2,7 @@
# arch/arm/lpc31xx/Make.defs
#
# Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions

5
arch/arm/src/lpc31xx/chip.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/chip.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -59,11 +59,10 @@
# define HAVE_INTSRAM1 1 /* 192Kb internal SRAM */
# define LPC31_NDMACH 12 /* 12 DMA channels */
# undef HAVE_AESENGINE /* No AES engine */
#elif defined(CONFIG_ARCH_CHIP_LPC3152)
#elif defined(CONFIG_ARCH_CHIP_LPC3154)
# define HAVE_INTSRAM1 1 /* 192Kb internal SRAM */
# define LPC31_NDMACH 12 /* 12 DMA channels */
# define HAVE_AESENGINE 1 /* AES engine */
# undef HAVE_AESENGINE /* No AES engine */
#else
# error "Unsupported LPC31XX architecture"
# undef HAVE_INTSRAM1 /* No INTSRAM1 */

2
arch/arm/src/lpc31xx/lpc31_adc.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_adc.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_allocateheap.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_allocateheap.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_analogdie.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_analogdie.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_bcrndx.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_bcrndx.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_cgu.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_cgu.h
*
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_cgudrvr.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_cgudrvr.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - NXP UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_clkdomain.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_clkdomain.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_clkexten.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_exten.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_clkfreq.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_clkfreq.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_clkinit.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_clkinit.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_decodeirq.c
View file

@ -3,7 +3,7 @@
* arch/arm/src/chip/lpc31_decodeirq.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_defclk.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_defclk.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_dma.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_dma.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_esrndx.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_esrndx.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_evntrtr.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_evntrtr.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_fdcndx.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_fdcndx.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_fdivinit.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_fdivinit.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_freqin.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_freqin.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_i2c.c
View file

@ -4,7 +4,7 @@
* Author: David Hewson
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_i2c.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_i2c.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_i2s.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_i2s.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_intc.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_intc.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_internal.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_internal.h
*
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_ioconfig.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_ioconfig.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_irq.c
View file

@ -3,7 +3,7 @@
* arch/arm/src/chip/lpc31_irq.c
*
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_lcd.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_lcd.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_mci.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_mci.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_memorymap.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_memorymap.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_mpmc.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_mpmc.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_nand.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_nand.h
*
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_otp.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_otp.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_pcm.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_pcm.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_pllconfig.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_pllconfig.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - NXP UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_pwm.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_pwm.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_resetclks.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_resetclks.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_rng.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_rng.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_setfdiv.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_setfdiv.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_setfreqin.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_setfreqin.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - NXP UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

2
arch/arm/src/lpc31xx/lpc31_softreset.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_softreset.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* References:
* - UM10314 LPC3130/31 User manual Rev. 1.01 — 9 September 2009

26
arch/arm/src/lpc31xx/lpc31_spi.c
View file

@ -1,9 +1,9 @@
/************************************************************************************
* arm/arm/src/lpc31xx/lpc31_spi.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved.
* Author: David Hewson, deriving in part from other SPI drivers originally by
* Gregory Nutt <spudmonkey@racsa.co.cr>
* Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -62,14 +62,12 @@
/* Configuration ********************************************************************/
/* Debug ****************************************************************************/
/* Define the following to enable extremely detailed register debug */
#undef CONFIG_DEBUG_SPIREGS
/* CONFIG_DEBUG must also be defined */
/* CONFIG_LPC31_SPI_REGDEBUG enabled very low, register-level debug output.
* CONFIG_DEBUG must also be defined
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_SPIREGS
# undef CONFIG_LPC31_SPI_REGDEBUG
#endif
/* FIFOs ****************************************************************************/
@ -102,7 +100,7 @@ struct lpc31_spidev_s
* Private Function Prototypes
************************************************************************************/
#ifdef CONFIG_DEBUG_SPIREGS
#ifdef CONFIG_LPC31_SPI_REGDEBUG
static bool spi_checkreg(bool wr, uint32_t value, uint32_t address);
static void spi_putreg(uint32_t value, uint32_t address);
static uint32_t spi_getreg(uint32_t address);
@ -163,7 +161,7 @@ static struct lpc31_spidev_s g_spidev =
.spidev = { &g_spiops },
};
#ifdef CONFIG_DEBUG_SPIREGS
#ifdef CONFIG_LPC31_SPI_REGDEBUG
static bool g_wrlast;
static uint32_t g_addresslast;
static uint32_t g_valuelast;
@ -194,7 +192,7 @@ static int g_ntimes;
*
****************************************************************************/
#ifdef CONFIG_DEBUG_SPIREGS
#ifdef CONFIG_LPC31_SPI_REGDEBUG
static bool spi_checkreg(bool wr, uint32_t value, uint32_t address)
{
if (wr == g_wrlast && value == g_valuelast && address == g_addresslast)
@ -233,7 +231,7 @@ static bool spi_checkreg(bool wr, uint32_t value, uint32_t address)
*
****************************************************************************/
#ifdef CONFIG_DEBUG_SPIREGS
#ifdef CONFIG_LPC31_SPI_REGDEBUG
static void spi_putreg(uint32_t value, uint32_t address)
{
if (spi_checkreg(true, value, address))
@ -258,7 +256,7 @@ static void spi_putreg(uint32_t value, uint32_t address)
*
****************************************************************************/
#ifdef CONFIG_DEBUG_SPIREGS
#ifdef CONFIG_LPC31_SPI_REGDEBUG
static uint32_t spi_getreg(uint32_t address)
{
uint32_t value = getreg32(address);
@ -920,7 +918,7 @@ FAR struct spi_dev_s *up_spiinitialize(int port)
* default to "driven-by-IP" on reset.
*/
#ifdef CONFIG_DEBUG_SPIREGS
#ifdef CONFIG_LPC31_SPI_REGDEBUG
lldbg("PINS: %08x MODE0: %08x MODE1: %08x\n",
spi_getreg(LPC31_IOCONFIG_SPI_PINS),
spi_getreg(LPC31_IOCONFIG_SPI_MODE0),

2
arch/arm/src/lpc31xx/lpc31_spi.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_spi.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_syscreg.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_syscreg.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_timer.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_timer.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_timerisr.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_timerisr.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_uart.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_uart.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

18
arch/arm/src/lpc31xx/lpc31_usbdev.c
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_usbdev.c
*
* Authors: David Hewson
* Gregory Nutt <spudmonkey@racsa.co.cr>
* Gregory Nutt <gnutt@nuttx.org>
*
* Part of the NuttX OS and based, in part, on the LPC2148 USB driver:
*
@ -74,8 +74,8 @@
/* Configuration ***************************************************************/
#ifndef CONFIG_USBDEV_EP0_MAXSIZE
# define CONFIG_USBDEV_EP0_MAXSIZE 64
#ifndef CONFIG_LPC31_USBDEV_EP0_MAXSIZE
# define CONFIG_LPC31_LPC31_USBDEV_EP0_MAXSIZE 64
#endif
#ifndef CONFIG_USBDEV_MAXPOWER
@ -401,7 +401,7 @@ static int lpc31_epdisable(FAR struct usbdev_ep_s *ep);
static FAR struct usbdev_req_s *lpc31_epallocreq(FAR struct usbdev_ep_s *ep);
static void lpc31_epfreereq(FAR struct usbdev_ep_s *ep,
FAR struct usbdev_req_s *);
#ifdef CONFIG_ARCH_USBDEV_DMA
#ifdef CONFIG_LPC31_USBDEV_DMA
static void *lpc31_epallocbuffer(FAR struct usbdev_ep_s *ep, unsigned bytes);
static void lpc31_epfreebuffer(FAR struct usbdev_ep_s *ep, FAR void *buf);
#endif
@ -438,7 +438,7 @@ static const struct usbdev_epops_s g_epops =
.disable = lpc31_epdisable,
.allocreq = lpc31_epallocreq,
.freereq = lpc31_epfreereq,
#ifdef CONFIG_ARCH_USBDEV_DMA
#ifdef CONFIG_LPC31_USBDEV_DMA
.allocbuffer = lpc31_epallocbuffer,
.freebuffer = lpc31_epfreebuffer,
#endif
@ -1003,11 +1003,11 @@ static void lpc31_dispatchrequest(struct lpc31_usbdev_s *priv,
static void lpc31_ep0configure(struct lpc31_usbdev_s *priv)
{
/* Enable ep0 IN and ep0 OUT */
g_qh[LPC31_EP0_OUT].capability = (DQH_CAPABILITY_MAX_PACKET(CONFIG_USBDEV_EP0_MAXSIZE) |
g_qh[LPC31_EP0_OUT].capability = (DQH_CAPABILITY_MAX_PACKET(CONFIG_LPC31_USBDEV_EP0_MAXSIZE) |
DQH_CAPABILITY_IOS |
DQH_CAPABILITY_ZLT);
g_qh[LPC31_EP0_IN ].capability = (DQH_CAPABILITY_MAX_PACKET(CONFIG_USBDEV_EP0_MAXSIZE) |
g_qh[LPC31_EP0_IN ].capability = (DQH_CAPABILITY_MAX_PACKET(CONFIG_LPC31_USBDEV_EP0_MAXSIZE) |
DQH_CAPABILITY_IOS |
DQH_CAPABILITY_ZLT);
@ -1955,7 +1955,7 @@ static void lpc31_epfreereq(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s
*
*******************************************************************************/
#ifdef CONFIG_ARCH_USBDEV_DMA
#ifdef CONFIG_LPC31_USBDEV_DMA
static void *lpc31_epallocbuffer(FAR struct usbdev_ep_s *ep, unsigned bytes)
{
usbtrace(TRACE_EPALLOCBUFFER, privep->epphy);
@ -1971,7 +1971,7 @@ static void *lpc31_epallocbuffer(FAR struct usbdev_ep_s *ep, unsigned bytes)
*
*******************************************************************************/
#ifdef CONFIG_LPC313x_USBDEV_DMA
#ifdef CONFIG_LPC31_USBDEV_DMA
static void lpc31_epfreebuffer(FAR struct usbdev_ep_s *ep, FAR void *buf)
{
usbtrace(TRACE_EPFREEBUFFER, privep->epphy);

2
arch/arm/src/lpc31xx/lpc31_usbotg.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_usbotg.h
*
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions

2
arch/arm/src/lpc31xx/lpc31_wdt.h
View file

@ -2,7 +2,7 @@
* arch/arm/src/lpc31xx/lpc31_wdt.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions