esp32[s2|s3]: Add qencoder defconfig

Documentation/platforms/xtensa/esp32/boards/esp32-devkitc/index.rst

@@ -761,6 +761,16 @@ To test it, just execute the ``pwm`` application::
     pwm_main: starting output with frequency: 10000 duty: 00008000
     pwm_main: stopping output
 
+qencoder
+---
+
+This configuration demostrates the use of Quadrature Encoder connected to pins
+GPIO10 and GPIO11. You can start measurement of pulses using the following
+command (by default, it will open ``\dev\qe0`` device and print 20 samples
+using 1 second delay)::
+
+    nsh> qe
+
 random
 ------
 

Documentation/platforms/xtensa/esp32s2/boards/esp32s2-saola-1/index.rst

@@ -312,6 +312,16 @@ ostest
 This is the NuttX test at apps/testing/ostest that is run against all new
 architecture ports to assure a correct implementation of the OS.
 
+qencoder
+---
+
+This configuration demostrates the use of Quadrature Encoder connected to pins
+GPIO10 and GPIO11. You can start measurement of pulses using the following
+command (by default, it will open ``\dev\qe0`` device and print 20 samples
+using 1 second delay)::
+
+    nsh> qe
+
 pwm
 ------
 

Documentation/platforms/xtensa/esp32s3/boards/esp32s3-devkit/index.rst

@@ -358,6 +358,16 @@ To test it, just run the ``oneshot`` example::
     Waiting...
     Finished
 
+qencoder
+---
+
+This configuration demostrates the use of Quadrature Encoder connected to pins
+GPIO10 and GPIO11. You can start measurement of pulses using the following
+command (by default, it will open ``\dev\qe0`` device and print 20 samples
+using 1 second delay)::
+
+    nsh> qe
+
 pm
 -------
 

boards/xtensa/esp32/esp32-devkitc/configs/qencoder/defconfig

@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_ARCH="xtensa"
+CONFIG_ARCH_BOARD="esp32-devkitc"
+CONFIG_ARCH_BOARD_COMMON=y
+CONFIG_ARCH_BOARD_ESP32_DEVKITC=y
+CONFIG_ARCH_CHIP="esp32"
+CONFIG_ARCH_CHIP_ESP32=y
+CONFIG_ARCH_CHIP_ESP32WROVER=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_XTENSA=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_ESP32_UART0=y
+CONFIG_ESP_PCNT=y
+CONFIG_ESP_PCNT_U0=y
+CONFIG_ESP_PCNT_U0_CH0_EDGE_PIN=10
+CONFIG_ESP_PCNT_U0_CH1_LEVEL_PIN=11
+CONFIG_ESP_PCNT_U0_FILTER_EN=y
+CONFIG_ESP_PCNT_U0_QE=y
+CONFIG_EXAMPLES_QENCODER=y
+CONFIG_EXAMPLES_QENCODER_DELAY=1000
+CONFIG_EXAMPLES_QENCODER_NSAMPLES=20
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=3072
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3072
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MM_REGIONS=3
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SENSORS=y
+CONFIG_SENSORS_QENCODER=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SYSLOG_BUFFER=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_UART0_SERIAL_CONSOLE=y

boards/xtensa/esp32s2/esp32s2-saola-1/configs/qencoder/defconfig

@@ -0,0 +1,56 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_ARCH="xtensa"
+CONFIG_ARCH_BOARD="esp32s2-saola-1"
+CONFIG_ARCH_BOARD_COMMON=y
+CONFIG_ARCH_BOARD_ESP32S2_SAOLA_1=y
+CONFIG_ARCH_CHIP="esp32s2"
+CONFIG_ARCH_CHIP_ESP32S2=y
+CONFIG_ARCH_CHIP_ESP32S2WROVER=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_XTENSA=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_ESP32S2_UART0=y
+CONFIG_ESP_PCNT=y
+CONFIG_ESP_PCNT_U0=y
+CONFIG_ESP_PCNT_U0_CH0_EDGE_PIN=10
+CONFIG_ESP_PCNT_U0_CH1_LEVEL_PIN=11
+CONFIG_ESP_PCNT_U0_FILTER_EN=y
+CONFIG_ESP_PCNT_U0_QE=y
+CONFIG_EXAMPLES_QENCODER=y
+CONFIG_EXAMPLES_QENCODER_DELAY=1000
+CONFIG_EXAMPLES_QENCODER_NSAMPLES=20
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=3072
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3072
+CONFIG_INTELHEX_BINARY=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SENSORS=y
+CONFIG_SENSORS_QENCODER=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SYSLOG_BUFFER=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_UART0_SERIAL_CONSOLE=y

boards/xtensa/esp32s3/esp32s3-devkit/configs/qencoder/defconfig

@@ -0,0 +1,59 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_ARCH_LEDS is not set
+# CONFIG_NSH_ARGCAT is not set
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_ARCH="xtensa"
+CONFIG_ARCH_BOARD="esp32s3-devkit"
+CONFIG_ARCH_BOARD_COMMON=y
+CONFIG_ARCH_BOARD_ESP32S3_DEVKIT=y
+CONFIG_ARCH_CHIP="esp32s3"
+CONFIG_ARCH_CHIP_ESP32S3=y
+CONFIG_ARCH_CHIP_ESP32S3WROOM1N4=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_XTENSA=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_ESP32S3_UART0=y
+CONFIG_ESP_PCNT=y
+CONFIG_ESP_PCNT_U0=y
+CONFIG_ESP_PCNT_U0_CH0_EDGE_PIN=10
+CONFIG_ESP_PCNT_U0_CH1_LEVEL_PIN=11
+CONFIG_ESP_PCNT_U0_FILTER_EN=y
+CONFIG_ESP_PCNT_U0_QE=y
+CONFIG_EXAMPLES_QENCODER=y
+CONFIG_EXAMPLES_QENCODER_DELAY=1000
+CONFIG_EXAMPLES_QENCODER_NSAMPLES=20
+CONFIG_FS_PROCFS=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=3072
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3072
+CONFIG_INTELHEX_BINARY=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=114688
+CONFIG_RAM_START=0x20000000
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_WAITPID=y
+CONFIG_SENSORS=y
+CONFIG_SENSORS_QENCODER=y
+CONFIG_START_DAY=6
+CONFIG_START_MONTH=12
+CONFIG_START_YEAR=2011
+CONFIG_SYSLOG_BUFFER=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_UART0_SERIAL_CONSOLE=y