diff --git a/arch/arm/src/at32/Kconfig b/arch/arm/src/at32/Kconfig index 5fce0ed654..2ad9180f8f 100644 --- a/arch/arm/src/at32/Kconfig +++ b/arch/arm/src/at32/Kconfig @@ -10,7 +10,6 @@ choice default ARCH_CHIP_AT32F437VM depends on ARCH_CHIP_AT32 - config ARCH_CHIP_AT32F437VM bool "AT32F437VM" select AT32_AT32F43XX @@ -37,7 +36,7 @@ config ARCH_CHIP_AT32F437RG select AT32_AT32F43XX select AT32_AT32F437 ---help--- - AT32F43X 64-pin , 1024KB FLASH, 384KB SRAM + AT32F43X 64-pin , 1024KB FLASH, 384KB SRAM config ARCH_CHIP_AT32F435VM bool "AT32F435VM" @@ -1067,7 +1066,6 @@ config AT32_NOEXT_VECTORS Sometimes you may not need any Vector support beyond SysTick and wish to save memory. This applies only to ARMv7-M architectures. - choice prompt "JTAG Configuration" default AT32_JTAG_DISABLE diff --git a/arch/arm/src/imxrt/Kconfig b/arch/arm/src/imxrt/Kconfig index b7017a7b06..ff29185c11 100644 --- a/arch/arm/src/imxrt/Kconfig +++ b/arch/arm/src/imxrt/Kconfig @@ -183,7 +183,7 @@ config IMXRT_APP_FORMAT_MCUBOOT select IMXRT_HAVE_OTA_PARTITION depends on EXPERIMENTAL ---help--- - The MCUboot support of loading the firmware images. + The MCUboot support of loading the firmware images. comment "MCUboot support depends on CONFIG_EXPERIMENTAL" depends on !EXPERIMENTAL diff --git a/arch/arm/src/sama5/Kconfig b/arch/arm/src/sama5/Kconfig index f290565b34..f128387f36 100644 --- a/arch/arm/src/sama5/Kconfig +++ b/arch/arm/src/sama5/Kconfig @@ -1092,13 +1092,13 @@ choice TRAILING EDGE: The signal is single-ended. If bit NON_OVERLAP is cleared, the signal is sent to CLASSD_L0 and CLASSD_R0. - + If bit NON_OVERLAP is set, the signal is sent to CLASSD_L0/L1 and CLASSD_R0/R1. UNIFORM: The signal is differential. If bit NON_OVERLAP is cleared, the signal is sent to CLASSD_L0/L2 and CLASSD_R0/R2. - + If bit NON_OVERLAP is set, the signal is sent to CLASSD_L0/L1/L2/L3 and CLASSD_R0/R1/R2/R3. @@ -1109,7 +1109,7 @@ config SAMA5D2_CLASSD_PWM_UNIFORM bool "Uniform" endchoice # Class D PWM Modulation Type - + config SAMA5D2_CLASSD_NON_OVERLAP_MODE bool "Non-overlapping Circuit Enable (NON_OVERLAP)" default n diff --git a/arch/xtensa/src/esp32s2/Kconfig b/arch/xtensa/src/esp32s2/Kconfig index 625ea79ccd..12e56a62eb 100644 --- a/arch/xtensa/src/esp32s2/Kconfig +++ b/arch/xtensa/src/esp32s2/Kconfig @@ -865,7 +865,7 @@ comment "General storage MTD configuration" config ESP32S2_MTD bool "MTD driver" - default y + default y select MTD select MTD_BYTE_WRITE select MTD_PARTITION diff --git a/boards/Kconfig b/boards/Kconfig index 0619819d7e..d956a3c5c6 100644 --- a/boards/Kconfig +++ b/boards/Kconfig @@ -1721,7 +1721,7 @@ config ARCH_BOARD_LINUM_STM32H753BI select ARCH_HAVE_BUTTONS ---help--- The Linum board is based on the STMicro STM32H753BI MCU. - + config ARCH_BOARD_NUCLEO_L152RE bool "STM32L152 Nucleo L152RE" depends on ARCH_CHIP_STM32L152RE @@ -3064,7 +3064,7 @@ config ARCH_BOARD default "esp32-pico-kit" if ARCH_BOARD_ESP32_PICO_KIT default "esp32-sparrow-kit" if ARCH_BOARD_ESP32_SPARROWKIT default "esp32-wrover-kit" if ARCH_BOARD_ESP32_WROVERKIT - default "esp32-2432S028" if ARCH_BOARD_ESP32_2432S028 + default "esp32-2432S028" if ARCH_BOARD_ESP32_2432S028 default "esp32c3-devkit" if ARCH_BOARD_ESP32C3_DEVKIT default "esp32c3-devkit-rust-1" if ARCH_BOARD_ESP32C3_DEVKIT_RUST1 default "esp32c3-generic" if ARCH_BOARD_ESP32C3_GENERIC @@ -3337,7 +3337,7 @@ config ARCH_BOARD default "xx3823" if ARCH_BOARD_XX3823 default "s698pm-dkit" if ARCH_BOARD_S698PM_DKIT default "hpm6750evk2" if ARCH_BOARD_HPM6750EVK2 - default "at32f437-mini" if ARCH_BOARD_AT32F437_MINI + default "at32f437-mini" if ARCH_BOARD_AT32F437_MINI comment "Common Board Options" @@ -4271,7 +4271,7 @@ config ARCH_BOARD_COMMON bool "Board common logic" default n ---help--- - Board common logic located in each board/common folder. + Board common logic located in each board/common folder. if ARCH_BOARD_COMMON if ARCH_CHIP_ESP32 diff --git a/boards/risc-v/litex/arty_a7/Kconfig b/boards/risc-v/litex/arty_a7/Kconfig index 7977b985b2..4109837f08 100644 --- a/boards/risc-v/litex/arty_a7/Kconfig +++ b/boards/risc-v/litex/arty_a7/Kconfig @@ -67,8 +67,8 @@ config LITEX_APPLICATION_RAMDISK bool "Use application ramdisk" depends on BUILD_KERNEL ---help--- - The application ramdisk is currently only intended only to hold + The application ramdisk is currently only intended only to hold application elfs in the romfs format. These applications must loaded externally into ram through litex_term, or similar method. -endif +endif # ARCH_BOARD_ARTY_A7 diff --git a/boards/xtensa/esp32s3/esp32s3-eye/Kconfig b/boards/xtensa/esp32s3/esp32s3-eye/Kconfig index d533243d3e..51df4a13d5 100644 --- a/boards/xtensa/esp32s3/esp32s3-eye/Kconfig +++ b/boards/xtensa/esp32s3/esp32s3-eye/Kconfig @@ -57,6 +57,6 @@ config ESP32S3_EYE_LCD select LCD_DEV select LCD_ST7789 ---help--- - Enable board LCD support, IC is LCD_ST7789V. + Enable board LCD support, IC is LCD_ST7789V. endif # ARCH_BOARD_ESP32S3_EYE diff --git a/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig b/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig index 01a4b2e000..3d26b68551 100644 --- a/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig +++ b/boards/xtensa/esp32s3/esp32s3-lcd-ev/Kconfig @@ -58,7 +58,7 @@ config ESP32S3_BOARD_IOEXPANDER default n depends on ESP32S3_BOARD_I2C ---help--- - Enable board IO expander support, IC is TC9554. + Enable board IO expander support, IC is TC9554. config ESP32S3_BOARD_LCD bool "Enable Board LCD" @@ -66,13 +66,13 @@ config ESP32S3_BOARD_LCD depends on ESP32S3_LCD select ESP32S3_BOARD_IOEXPANDER ---help--- - Enable board LCD support, IC is GC9503CV. + Enable board LCD support, IC is GC9503CV. config ESP32S3_BOARD_TOUCHPAD bool "Enable Board Touchpad" default n depends on ESP32S3_BOARD_I2C ---help--- - Enable board touchpad support, IC is FT5X06. + Enable board touchpad support, IC is FT5X06. endif # ARCH_BOARD_ESP32S3_LCD_EV