nuttx/nuttx-update
1
2
Fork 1
Code Issues 1 Pull requests 1 Projects Releases Packages Wiki Activity Actions

pcDuino: More changes to get the code fragments that are in place building successfully

Browse source
This commit is contained in:
Gregory Nutt 2013-12-07 16:44:23 -06:00
parent 2f8a32a109
commit b3216c317a
7 changed files with 239 additions and 27 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
configs/Kconfig
View file

@ -462,6 +462,9 @@ config ARCH_BOARD_PCBLOGICPIC32MX
config ARCH_BOARD_PCDUINO_A10
bool "pcDuino A10"
depends on ARCH_CHIP_A10
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This is the port of NuttX to the Allwinner A10-based pcDuino v1
board. See http://www.pcduino.com/ for information about pcDuino Lite, v1,

9
configs/pcduino-a10/include/board.h
View file

@ -52,6 +52,15 @@
/* LED definitions ******************************************************************/
#warning Missing Logic
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_INIRQ 4
#define LED_SIGNAL 5
#define LED_ASSERTION 6
#define LED_PANIC 7
/* Button definitions ***************************************************************/
#warning Missing Logic

73
configs/pcduino-a10/include/board_memorymap.h Normal file
View file

@ -0,0 +1,73 @@
/************************************************************************************
* configs/pcduino-a10/include/board_memorymap.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_PCDUINO_A10_INCLUDE_BOARD_MEMORYMAP_H
#define __CONFIGS_PCDUINO_A10_INCLUDE_BOARD_MEMORYMAP_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_PCDUINO_A10_INCLUDE_BOARD_MEMORYMAP_H */

61
configs/pcduino-a10/nsh/defconfig
View file

@ -44,6 +44,7 @@ CONFIG_RAW_BINARY=y
#
# CONFIG_DEBUG is not set
CONFIG_ARCH_HAVE_STACKCHECK=y
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
@ -112,6 +113,15 @@ CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
#
# A1x Configuration Options
#
CONFIG_ARCH_CHIP_A10=y
# CONFIG_A1X_BOOT_NAND is not set
# CONFIG_A1X_BOOT_SPINOR is not set
CONFIG_A1X_BOOT_SDCARD=y
# CONFIG_A1X_BOOT_USB is not set
#
# Architecture Options
#
@ -140,20 +150,17 @@ CONFIG_ARCH_INTERRUPTSTACK=2048
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMFLASH is not set
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
CONFIG_BOOT_RUNFROMSDRAM=y
# CONFIG_BOOT_COPYTORAM is not set
#
# Boot Memory Configuration
#
CONFIG_RAM_START=0x00304000
CONFIG_RAM_VSTART=0x00304000
CONFIG_RAM_SIZE=114688
CONFIG_FLASH_START=0x10000000
CONFIG_FLASH_VSTART=0x10000000
CONFIG_FLASH_SIZE=134217728
CONFIG_RAM_START=0x40000000
CONFIG_RAM_VSTART=0x40000000
CONFIG_RAM_SIZE=268435456
#
# Board Selection
@ -248,9 +255,12 @@ CONFIG_DEV_NULL=y
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
# CONFIG_PWM is not set
# CONFIG_ARCH_HAVE_I2CRESET is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_I2S is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
@ -264,31 +274,15 @@ CONFIG_DEV_NULL=y
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_USART1=y
#
# USART Configuration
#
CONFIG_USART1_ISUART=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_USART1_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART1 Configuration
#
CONFIG_USART1_RXBUFSIZE=256
CONFIG_USART1_TXBUFSIZE=256
CONFIG_USART1_BAUD=115200
CONFIG_USART1_BITS=8
CONFIG_USART1_PARITY=0
CONFIG_USART1_2STOP=0
# CONFIG_USART1_IFLOWCONTROL is not set
# CONFIG_USART1_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
# CONFIG_USBDEV is not set
@ -307,6 +301,8 @@ CONFIG_USART1_2STOP=0
#
# Networking Support
#
# CONFIG_ARCH_HAVE_NET is not set
# CONFIG_ARCH_HAVE_PHY is not set
# CONFIG_NET is not set
#
@ -317,6 +313,8 @@ CONFIG_USART1_2STOP=0
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
CONFIG_FS_READABLE=y
CONFIG_FS_WRITABLE=y
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
CONFIG_FAT_LCNAMES=y
@ -328,6 +326,7 @@ CONFIG_FAT_MAXFNAME=32
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
# CONFIG_FS_BINFS is not set
# CONFIG_FS_PROCFS is not set
#
# System Logging
@ -425,6 +424,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CONFIGDATA is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
@ -569,6 +569,7 @@ CONFIG_NSH_BUILTIN_APPS=y
#
# CONFIG_NSH_CMDOPT_DF_H is not set
CONFIG_NSH_CODECS_BUFSIZE=128
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=80
CONFIG_NSH_MAXARGUMENTS=6
@ -587,6 +588,11 @@ CONFIG_NSH_CONSOLE=y
# NxWidgets/NxWM
#
#
# Platform-specific Support
#
# CONFIG_PLATFORM_CONFIGDATA is not set
#
# System NSH Add-Ons
#
@ -617,6 +623,11 @@ CONFIG_NSH_CONSOLE=y
# FLASH Erase-all Command
#
#
# NxPlayer media player library / command Line
#
# CONFIG_SYSTEM_NXPLAYER is not set
#
# RAM test
#

116
configs/pcduino-a10/scripts/sdram.ld Normal file
View file

@ -0,0 +1,116 @@
/****************************************************************************
* configs/pcduino-a10/scripts/ddram.ld
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The pcDuino and 256MB of SDRAM beginning at virtual address 0x4000:0000 */
MEMORY
{
sdram (W!RX) : ORIGIN = 0x40000000, LENGTH = 256M
}
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(entry)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
*(.ARM.extab*)
*(.gnu.linkonce.armextab.*)
_etext = ABSOLUTE(.);
} > sdram
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > sdram
.ARM.extab : {
*(.ARM.extab*)
} > sdram
/* .ARM.exidx is sorted, so has to go in its own output section. */
PROVIDE_HIDDEN (__exidx_start = .);
.ARM.exidx :
{
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
} > sdram
PROVIDE_HIDDEN (__exidx_end = .);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sdram
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sdram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

2
configs/pcduino-a10/src/Makefile
View file

@ -40,7 +40,7 @@ CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = a1x_boot.c a2x_leds.c
CSRCS = a1x_boot.c a1x_leds.c
ifeq ($(CONFIG_HAVE_CXX),y)
CSRCS += a1x_cxxinitialize.c

2
configs/sama5d3x-ek/scripts/ddram.ld
View file

@ -1,5 +1,5 @@
/****************************************************************************
* configs/ea3131/scripts/ddram.ld
* configs/sama5d3x-ek/scripts/ddram.ld
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>