nuttx/nuttx-update
1
2
Fork 1
Code Issues 1 Pull requests 1 Projects Releases Packages Wiki Activity Actions

Merge branch 'olimex-stm32-h407'

Browse source
This commit is contained in:
neilh10 2016-01-15 17:24:55 -08:00
commit e771c82fa6
22 changed files with 4777 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

11
configs/Kconfig
View file

@ -510,6 +510,17 @@ config ARCH_BOARD_OLIMEX_STM32H405
further information. This board features the STMicro STM32F405RGT6
MCU.
config ARCH_BOARD_OLIMEX_STM32H407
bool "Olimex STM32 H407 board"
depends on ARCH_CHIP_STM32F407ZG
select ARCH_HAVE_LEDS
select ARCH_HAVE_BUTTONS
select ARCH_HAVE_IRQBUTTONS
---help---
This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
further information. This board features the STMicro STM32F407ZGT6 (144pins).
config ARCH_BOARD_OLIMEX_STM32P107
bool "Olimex STM32 P107 board"
depends on ARCH_CHIP_STM32F107VC

8
configs/olimex-stm32-h407/Kconfig Normal file
View file

@ -0,0 +1,8 @@
#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#
if ARCH_BOARD_OLIMEX_STM32H407
endif

30
configs/olimex-stm32-h407/README.txt Normal file
View file

@ -0,0 +1,30 @@
README
======
The NuttX configuration for the Olimex STM32-H407 is based on the configuration
Olimex STM32-H405 / STM32-P207.
[[[It was tested with the NuttX EABI "buildroot" Toolchain.
Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that
CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG
are enabled so that the JTAG connection is not disconnected by the idle
loop.
nshusb - tested stm32F407 OTG_HS
added nsh
Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults
to '/dev/console' which makes problems with the shell over USB.
The following peripherals are enabled in this configuration.
?? - LED: Shows the sytem status
?? - Button: Built in app 'buttons' works.
?? - ADC: ADC1 samples ADC_IN1. Built in app 'adc' works.
?? - USB-FS-OTG: The console is running on the virtual serial port. Note that you
have to press enter three times until NSH appears.
- CAN: Built in app 'can' is enabled but not tested, since no CAN transceiver
is on board.

232
configs/olimex-stm32-h407/include/board.h Normal file
View file

@ -0,0 +1,232 @@
/************************************************************************************
* configs/olimex-stm32-h407/include/board.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H
#define __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H 1
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdio.h"
#include "stm32.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* HSI - 16 MHz RC factory-trimmed
* LSI - 32 KHz RC (30-60KHz, uncalibrated)
* HSE - On-board crystal frequency is 12MHz
* LSE - 32.768 kHz
* STM32F407ZGT6 - too 168Mhz
*/
#define STM32_BOARD_XTAL 12000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE
* PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
* = (25,000,000 / 12) * 360
* = 240,000,000
* SYSCLK = PLL_VCO / PLLP
* = 240,000,000 / 2 = 120,000,000
* USB OTG FS, SDIO and RNG Clock
* = PLL_VCO / PLLQ
* = 240,000,000 / 5 = 48,000,000
* = 48,000,000
*
* Xtal /M *n /P SysClk AHB HCLK APB1 PCLK1
* 12Mhz HSE /12 336 /2 PLLCLK 168Mhz /1 168 /4 42Mhz
* 12Mhz HSE /6 168 /2 PLLCLK 168Mhz /1 168 /4 42Mhz
*/
#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(3)
#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(84)
#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5)
#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
/* AHB clock (HCLK) is SYSCLK (168MHz) ?*/
#define STM32_SYSCLK_FREQUENCY 168000000ul
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */
#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/4 (30MHz) */
/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4)
/* Timers driven from APB1 will be twice PCLK1 (60Mhz)*/
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* APB2 clock (PCLK2) is HCLK/2 (60MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timers driven from APB2 will be twice PCLK2 (120Mhz)*/
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1
*/
#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY
#define STM32_TIM27_FREQUENCY STM32_HCLK_FREQUENCY
/* LED definitions ******************************************************************/
/* If CONFIG_ARCH_LEDS is not defined, then the user can control the status LED in any
* way. The following definitions are used to access individual LEDs.
*/
/* LED index values for use with board_userled() */
#define BOARD_LED_STATUS 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_LED_STATUS_BIT (1 << BOARD_LED1)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of the
* Olimex STM32-H405. The following definitions describe how NuttX controls the LEDs:
*/
#define LED_STARTED 0 /* LED_STATUS on */
#define LED_HEAPALLOCATE 1 /* no change */
#define LED_IRQSENABLED 2 /* no change */
#define LED_STACKCREATED 3 /* no change */
#define LED_INIRQ 4 /* no change */
#define LED_SIGNAL 5 /* no change */
#define LED_ASSERTION 6 /* LED_STATUS off */
#define LED_PANIC 7 /* LED_STATUS blinking */
/* Button definitions ***************************************************************/
/* The Olimex STM32-H405 supports one buttons: */
#define BUTTON_BUT 0
#define NUM_BUTTONS 1
#define BUTTON_BUT_BIT (1 << BUTTON_BUT)
/* Alternate function pin selections ************************************************/
//USART3:
//#define GPIO_USART3_RX GPIO_USART3_RX_1 //PB11
//#define GPIO_USART3_TX GPIO_USART3_TX_1 //PB10
//#define GPIO_USART3_CTS GPIO_USART3_CTS_1 //PB13
//#define GPIO_USART3_RTS GPIO_USART3_RTS_1 //PB14
#define GPIO_USART2_RX GPIO_USART2_RX_1 //
#define GPIO_USART2_TX GPIO_USART2_TX_1 //
#define GPIO_USART2_CTS GPIO_USART2_CTS_1 //
#define GPIO_USART2_RTS GPIO_USART2_RTS_1 //
//CAN:
#define GPIO_CAN1_RX GPIO_CAN1_RX_2 //PB8
#define GPIO_CAN1_TX GPIO_CAN1_TX_2 //PB9
#define GPIO_CAN2_RX GPIO_CAN1_RX_2 //PB5
#define GPIO_CAN2_TX GPIO_CAN1_TX_2 //PB6
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H */

113
configs/olimex-stm32-h407/nsh/Make.defs Normal file
View file

@ -0,0 +1,113 @@
############################################################################
# configs/stm32f4discovery/nsh/Make.defs
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =

1106
configs/olimex-stm32-h407/nsh/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

80
configs/olimex-stm32-h407/nsh/setenv.sh Executable file
View file

@ -0,0 +1,80 @@
#!/bin/bash
# configs/stm32f4discovery/nsh/setenv.sh
#
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH variable
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

111
configs/olimex-stm32-h407/nshusb/Make.defs Normal file
View file

@ -0,0 +1,111 @@
############################################################################
# configs/olimex-stm32-h407/nshusb/Make.defs
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -gdwarf-2
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
ASMEXT = .S
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
HOSTLDFLAGS =

1163
configs/olimex-stm32-h407/nshusb/defconfig Normal file
View file

File diff suppressed because it is too large Load diff

75
configs/olimex-stm32-h407/nshusb/setenv.sh Normal file
View file

@ -0,0 +1,75 @@
#!/bin/bash
# configs/olimex-stm32-h407/nshusb/setenv.sh
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

122
configs/olimex-stm32-h407/scripts/ld.script Normal file
View file

@ -0,0 +1,122 @@
/****************************************************************************
* configs/olimex-stm32-h405/scripts/ld.script
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F405RGT6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into two blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000
* 2) 16Kb of SRAM beginning at address 0x2001:c000
3) 64Kb of SRAM beginning at address 0x2002:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

87
configs/olimex-stm32-h407/src/Makefile Normal file
View file

@ -0,0 +1,87 @@
############################################################################
# configs/olimex-stm32-h407/src/Makefile
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
ASRCS =
CSRCS = stm32_boot.c
ifeq ($(CONFIG_HAVE_CXX),y)
CSRCS += stm32_cxxinitialize.c
endif
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += stm32_autoleds.c
else
CSRCS += stm32_userleds.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += stm32_buttons.c
endif
ifeq ($(CONFIG_NSH_LIBRARY),y)
CSRCS += stm32_nsh.c
endif
ifeq ($(CONFIG_ARCH_IDLE_CUSTOM),y)
CSRCS += stm32_idle.c
endif
ifeq ($(CONFIG_STM32_FSMC),y)
CSRCS += stm32_extmem.c
endif
ifeq ($(CONFIG_STM32_OTGFS),y)
CSRCS += stm32_usb.c
endif
ifeq ($(CONFIG_STM32_OTGHS),y)
CSRCS += stm32_usb.c
endif
ifeq ($(CONFIG_ADC),y)
CSRCS += stm32_adc.c
endif
ifeq ($(CONFIG_CAN),y)
CSRCS += stm32_can.c
endif
ifeq ($(CONFIG_ARCH_FPU),y)
CSRCS += stm32_ostest.c
endif
include $(TOPDIR)/configs/Board.mk

142
configs/olimex-stm32-h407/src/olimex-stm32-h407.h Normal file
View file

@ -0,0 +1,142 @@
/****************************************************************************
* configs/olimex-stm32-h405/src/olimex-stm32-h405.h
*
* Copyright (C) 2014 Max Holtzberg. All rights reserved.
* Author: Max Holtzberg <mholtzberg@uvc-ingenieure.de>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIGS_OLIMEX_STM32_H407_SRC_H
#define __CONFIGS_OLIMEX_STM32_H407_SRC_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Olimex-STM32-P407 GPIOs ****************************************************/
/* LEDs */
#define GPIO_LED_STATUS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN12)
/* BUTTONS -- NOTE that all have EXTI interrupts configured */
#define MIN_IRQBUTTON BUTTON_BUT
#define MAX_IRQBUTTON BUTTON_BUT
#define NUM_IRQBUTTONS 1
#define GPIO_BTN_BUT (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0)
/* USB OTG FS - USB-A connector
*
* PC4 OTG_FS_VBUS VBUS sensing
*/
//#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4)
//#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4)
/* USB OTG HS - miniUSB connector
*
* PB13 OTG_HS_VBUS VBUS sensing (also connected to the green LED)
* PA8 OTG_HS_PowerSwitchOn
* PB5 OTG_HS_Overcurrent
*/
#define GPIO_OTGHS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTB|GPIO_PIN13)
#define GPIO_OTGHS_PWRON (GPIO_OUTPUT|GPIO_OUTPUT_SET|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN8)
#ifdef CONFIG_USBHOST
# define GPIO_OTGHS_OVER (GPIO_INPUT|GPIO_EXTI|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN5)
#else
# define GPIO_OTGHS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN5)
#endif
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called from stm32_usbinitialize very early in initialization to setup USB-related
* GPIO pins for the Olimex-STM32-H405 board.
*
************************************************************************************/
#if defined(CONFIG_STM32_OTGFS) || defined(CONFIG_STM32_OTGHS)
void weak_function stm32_usbinitialize(void);
#endif
/************************************************************************************
* Name: stm32_adc_initialize
*
* Description:
* Called at application startup time to initialize the ADC functionality.
*
************************************************************************************/
#ifdef CONFIG_ADC
int stm32_adc_initialize(void);
#endif
/************************************************************************************
* Name: stm32_can_initialize
*
* Description:
* Called at application startup time to initialize the CAN functionality.
*
************************************************************************************/
#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
int stm32_can_initialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_OLIMEX_STM32_H407_SRC_INTERNAL_H */

187
configs/olimex-stm32-h407/src/stm32_adc.c Normal file
View file

@ -0,0 +1,187 @@
/************************************************************************************
* configs/olimex-stm32-h405/src/stm32_adc.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/board.h>
#include <nuttx/analog/adc.h>
#include <arch/board/board.h>
#include "chip.h"
#include "stm32_adc.h"
#include "olimex-stm32-h407.h"
#ifdef CONFIG_ADC
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
/* Up to 3 ADC interfaces are supported */
#if STM32_NADC < 3
# undef CONFIG_STM32_ADC3
#endif
#if STM32_NADC < 2
# undef CONFIG_STM32_ADC2
#endif
#if STM32_NADC < 1
# undef CONFIG_STM32_ADC1
#endif
#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3)
#ifndef CONFIG_STM32_ADC1
# warning "Channel information only available for ADC1"
#endif
/* The number of ADC channels in the conversion list */
#define ADC1_NCHANNELS 1//14
/************************************************************************************
* Private Data
************************************************************************************/
/* The Olimex STM32-P405 has a 10 Kohm potentiometer AN_TR connected to PC0
* ADC123_IN10
*/
/* Identifying number of each ADC channel: Variable Resistor. */
#ifdef CONFIG_STM32_ADC1
static const uint8_t g_chanlist[ADC1_NCHANNELS] = {1};/*, 2, 3,
4, 5, 6,
7, 8, 9,
10, 11, 12,
13, 15};*/
/* Configurations of pins used byte each ADC channels */
static const uint32_t g_pinlist[ADC1_NCHANNELS] = {GPIO_ADC1_IN1};/*, GPIO_ADC1_IN2, GPIO_ADC1_IN3,
GPIO_ADC1_IN4, GPIO_ADC1_IN5, GPIO_ADC1_IN6,
GPIO_ADC1_IN7, GPIO_ADC1_IN8, GPIO_ADC1_IN9,
GPIO_ADC1_IN10, GPIO_ADC1_IN11, GPIO_ADC1_IN12,
GPIO_ADC1_IN13, GPIO_ADC1_IN15};*/
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: board_adc_setup
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/adc.
*
************************************************************************************/
int board_adc_setup(void)
{
return stm32_adc_initialize();
}
/************************************************************************************
* Name: stm32_adc_initialize
*
* Description:
* Called at application startup time to initialize the ADC functionality.
*
************************************************************************************/
int stm32_adc_initialize(void)
{
#ifdef CONFIG_STM32_ADC1
static bool initialized = false;
struct adc_dev_s *adc;
int ret;
int i;
/* Check if we have already initialized */
if (!initialized)
{
/* Configure the pins as analog inputs for the selected channels */
for (i = 0; i < ADC1_NCHANNELS; i++)
{
stm32_configgpio(g_pinlist[i]);
}
/* Call stm32_adcinitialize() to get an instance of the ADC interface */
adc = stm32_adcinitialize(1, g_chanlist, ADC1_NCHANNELS);
if (adc == NULL)
{
adbg("ERROR: Failed to get ADC interface\n");
return -ENODEV;
}
/* Register the ADC driver at "/dev/adc0" */
ret = adc_register("/dev/adc0", adc);
if (ret < 0)
{
adbg("adc_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
#else
return -ENOSYS;
#endif
}
#endif /* CONFIG_STM32_ADC1 || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */
#endif /* CONFIG_ADC */

122
configs/olimex-stm32-h407/src/stm32_autoleds.c Normal file
View file

@ -0,0 +1,122 @@
/****************************************************************************
* configs/olimex-stm32-h407/src/stm32_autoleds.c
*
* Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32.h"
#include "olimex-stm32-h407.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_autoled_initialize
****************************************************************************/
void board_autoled_initialize(void)
{
/* Configure LED_STATUS GPIO for output */
stm32_configgpio(GPIO_LED_STATUS);
}
/****************************************************************************
* Name: board_autoled_on
****************************************************************************/
void board_autoled_on(int led)
{
if(led == LED_STARTED)
stm32_gpiowrite(GPIO_LED_STATUS, true);
if(led == LED_ASSERTION || led == LED_PANIC)
stm32_gpiowrite(GPIO_LED_STATUS, false);
}
/****************************************************************************
* Name: board_autoled_off
****************************************************************************/
void board_autoled_off(int led)
{
if(led == LED_STARTED)
stm32_gpiowrite(GPIO_LED_STATUS, false);
if(led == LED_ASSERTION || led == LED_PANIC)
stm32_gpiowrite(GPIO_LED_STATUS, true);
}
#endif /* CONFIG_ARCH_LEDS */

126
configs/olimex-stm32-h407/src/stm32_boot.c Normal file
View file

@ -0,0 +1,126 @@
/************************************************************************************
* configs/olimex-stm32-h405/src/stm32_boot.c
*
* Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "olimex-stm32-h407.h"
#include "stm32_ccm.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32_boardinitialize(void)
{
/* Initialize USB if the 1) OTG FS controller is in the configuration and 2)
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* into the build. Presumeably either CONFIG_USBDEV is also selected.
*/
#if defined(CONFIG_STM32_OTGFS) || defined(CONFIG_STM32_OTGHS)
if (stm32_usbinitialize)
{
stm32_usbinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
board_autoled_initialize();
#endif
/* Configure on-board BUTTONs if BUTTON support has been selected. */
#ifdef CONFIG_ARCH_BUTTONS
board_button_initialize();
#endif
}
/****************************************************************************
* Name: board_initialize
*
* Description:
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_initialize(). board_initialize() will be
* called immediately after up_intitialize() is called and just before the
* initial application is started. This additional initialization phase
* may be used, for example, to initialize board-specific device drivers.
*
****************************************************************************/
#ifdef CONFIG_BOARD_INITIALIZE
void board_initialize(void)
{
/* Perform NSH initialization here instead of from the NSH. This
* alternative NSH initialization is necessary when NSH is ran in user-space
* but the initialization function must run in kernel space.
*/
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
board_app_initialize();
#endif
}
#endif

158
configs/olimex-stm32-h407/src/stm32_buttons.c Normal file
View file

@ -0,0 +1,158 @@
/****************************************************************************
* configs/olimex-stm32-h405/src/stm32_buttons.c
*
* Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <nuttx/arch.h>
#include <nuttx/board.h>
#include <arch/board/board.h>
#include "olimex-stm32-h407.h"
#ifdef CONFIG_ARCH_BUTTONS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/* Pin configuration for each Olimex-STM32-H405 button. This array is indexed by
* the BUTTON_* definitions in board.h
*/
static const uint16_t g_buttons[NUM_BUTTONS] =
{
GPIO_BTN_BUT
};
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_button_initialize
*
* Description:
* board_button_initialize() must be called to initialize button resources. After
* that, board_buttons() may be called to collect the current state of all
* buttons or board_button_irq() may be called to register button interrupt
* handlers.
*
****************************************************************************/
void board_button_initialize(void)
{
int i;
/* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are
* configured for all pins.
*/
for (i = 0; i < NUM_BUTTONS; i++)
{
stm32_configgpio(g_buttons[i]);
}
}
/****************************************************************************
* Name: board_buttons
****************************************************************************/
uint8_t board_buttons(void)
{
uint8_t ret = 0;
/* Check that state of each key */
if (!stm32_gpioread(g_buttons[BUTTON_BUT]))
{
ret |= BUTTON_BUT_BIT;
}
return ret;
}
/************************************************************************************
* Button support.
*
* Description:
* board_button_initialize() must be called to initialize button resources. After
* that, board_buttons() may be called to collect the current state of all
* buttons or board_button_irq() may be called to register button interrupt
* handlers.
*
* After board_button_initialize() has been called, board_buttons() may be called to
* collect the state of all buttons. board_buttons() returns an 8-bit bit set
* with each bit associated with a button. See the BUTTON_*_BIT
* definitions in board.h for the meaning of each bit.
*
* board_button_irq() may be called to register an interrupt handler that will
* be called when a button is depressed or released. The ID value is a
* button enumeration value that uniquely identifies a button resource. See the
* BUTTON_* definitions in board.h for the meaning of enumeration
* value. The previous interrupt handler address is returned (so that it may
* restored, if so desired).
*
************************************************************************************/
#ifdef CONFIG_ARCH_IRQBUTTONS
xcpt_t board_button_irq(int id, xcpt_t irqhandler)
{
xcpt_t oldhandler = NULL;
/* The following should be atomic */
if (id >= MIN_IRQBUTTON && id <= MAX_IRQBUTTON)
{
oldhandler = stm32_gpiosetevent(g_buttons[id], true, true, true, irqhandler);
}
return oldhandler;
}
#endif
#endif /* CONFIG_ARCH_BUTTONS */

149
configs/olimex-stm32-h407/src/stm32_can.c Normal file
View file

@ -0,0 +1,149 @@
/************************************************************************************
* configs/olimex-stm32-405/src/stm32_can.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/can.h>
#include <arch/board/board.h>
#include "stm32.h"
#include "stm32_can.h"
#include "olimex-stm32-h407.h"
#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2))
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
# warning "Both CAN1 and CAN2 are enabled. Only CAN1 is used."
# undef CONFIG_STM32_CAN2
#endif
#ifdef CONFIG_STM32_CAN1
# define CAN_PORT 1
#else
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define candbg dbg
# define canvdbg vdbg
# define canlldbg lldbg
# define canllvdbg llvdbg
#else
# define candbg(x...)
# define canvdbg(x...)
# define canlldbg(x...)
# define canllvdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: board_can_initialize
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/can.
*
************************************************************************************/
int board_can_initialize(void)
{
return stm32_can_initialize();
}
/****************************************************************************************************
* Name: stm32_can_initialize
*
* Description:
* Called at application startup time to initialize the CAN functionality.
*
****************************************************************************************************/
int stm32_can_initialize(void)
{
static bool initialized = false;
struct can_dev_s *can;
int ret;
/* Check if we have already initialized */
if (!initialized)
{
/* Call stm32_caninitialize() to get an instance of the CAN interface */
can = stm32_caninitialize(CAN_PORT);
if (can == NULL)
{
candbg("ERROR: Failed to get CAN interface\n");
return -ENODEV;
}
/* Register the CAN driver at "/dev/can0" */
ret = can_register("/dev/can0", can);
if (ret < 0)
{
candbg("ERROR: can_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif /* CONFIG_CAN && (CONFIG_STM32_CAN1 || CONFIG_STM32_CAN2) */

153
configs/olimex-stm32-h407/src/stm32_cxxinitialize.c Normal file
View file

@ -0,0 +1,153 @@
/************************************************************************************
* configs/olimex-stm32-h405/src/stm32_cxxinitialize.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <arch/stm32/chip.h>
#include "chip.h"
#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Debug ****************************************************************************/
/* Non-standard debug that may be enabled just for testing the static constructors */
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_CXX
#endif
#ifdef CONFIG_DEBUG_CXX
# define cxxdbg dbg
# define cxxlldbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define cxxvdbg vdbg
# define cxxllvdbg llvdbg
# else
# define cxxvdbg(x...)
# define cxxllvdbg(x...)
# endif
#else
# define cxxdbg(x...)
# define cxxlldbg(x...)
# define cxxvdbg(x...)
# define cxxllvdbg(x...)
#endif
/************************************************************************************
* Private Types
************************************************************************************/
/* This type defines one entry in initialization array */
typedef void (*initializer_t)(void);
/************************************************************************************
* External references
************************************************************************************/
/* _sinit and _einit are symbols exported by the linker script that mark the
* beginning and the end of the C++ initialization section.
*/
extern initializer_t _sinit;
extern initializer_t _einit;
/* _stext and _etext are symbols exported by the linker script that mark the
* beginning and the end of text.
*/
extern uint32_t _stext;
extern uint32_t _etext;
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/****************************************************************************
* Name: up_cxxinitialize
*
* Description:
* If C++ and C++ static constructors are supported, then this function
* must be provided by board-specific logic in order to perform
* initialization of the static C++ class instances.
*
* This function should then be called in the application-specific
* user_start logic in order to perform the C++ initialization. NOTE
* that no component of the core NuttX RTOS logic is involved; This
* function defintion only provides the 'contract' between application
* specific C++ code and platform-specific toolchain support
*
****************************************************************************/
void up_cxxinitialize(void)
{
initializer_t *initp;
cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
&_sinit, &_einit, &_stext, &_etext);
/* Visit each entry in the initialzation table */
for (initp = &_sinit; initp != &_einit; initp++)
{
initializer_t initializer = *initp;
cxxdbg("initp: %p initializer: %p\n", initp, initializer);
/* Make sure that the address is non-NULL and lies in the text region
* defined by the linker script. Some toolchains may put NULL values
* or counts in the initialization table
*/
if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
{
cxxdbg("Calling %p\n", initializer);
initializer();
}
}
}
#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */

170
configs/olimex-stm32-h407/src/stm32_nsh.c Normal file
View file

@ -0,0 +1,170 @@
/****************************************************************************
* config/olimex-stm32-h405/src/stm32_nsh.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <syslog.h>
#include <errno.h>
#include <nuttx/board.h>
#ifdef CONFIG_SYSTEM_USBMONITOR
# include <apps/usbmonitor.h>
#endif
#ifdef CONFIG_STM32_OTGFS
# include "stm32_usbhost.h"
#endif
#include "stm32.h"
#include "olimex-stm32-h407.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#define HAVE_USBDEV 1
#define HAVE_USBHOST 1
#define HAVE_USBMONITOR 1
/* Can't support USB host or device features if USB OTG HS is not enabled */
#ifndef CONFIG_STM32_OTGHS
# undef HAVE_USBDEV
# undef HAVE_USBHOST
# undef HAVE_USBMONITOR
#endif
/* Can't support USB device monitor if USB device is not enabled */
#ifndef CONFIG_USBDEV
# undef HAVE_USBDEV
# undef HAVE_USBMONITOR
#endif
/* Can't support USB host is USB host is not enabled */
#ifndef CONFIG_USBHOST
# undef HAVE_USBHOST
#endif
/* Check if we should enable the USB monitor before starting NSH */
#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR)
# undef HAVE_USBMONITOR
#endif
#if !defined(CONFIG_STM32_CAN1) && !defined(CONFIG_STM32_CAN2)
# undef CONFIG_CAN
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform architecture specific initialization
*
* CONFIG_NSH_ARCHINIT=y :
* Called from the NSH library
*
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
* CONFIG_NSH_ARCHINIT=n :
* Called from board_initialize().
*
****************************************************************************/
int board_app_initialize(void)
{
#if defined(CONFIG_CAN) || defined(CONFIG_ADC)
int ret;
#endif
#ifdef CONFIG_CAN
/* Configure on-board CAN if CAN support has been selected. */
ret = stm32_can_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize CAN: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Configure on-board ADCs if ADC support has been selected. */
ret = stm32_adc_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize ADC: %d\n", ret);
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. stm32_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = stm32_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start(0, NULL);
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d\n", ret);
}
#endif
return OK;
}

314
configs/olimex-stm32-h407/src/stm32_usb.c Normal file
View file

@ -0,0 +1,314 @@
/************************************************************************************
* configs/olimex-stm32-h405/src/stm32_usbdev.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <sched.h>
#include <errno.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbhost.h>
#include <nuttx/usb/usbdev_trace.h>
#include "up_arch.h"
#include "stm32.h"
#include "stm32_otgfs.h"
#include "stm32_otghs.h"
#include "olimex-stm32-h407.h"
#ifdef CONFIG_STM32_OTGHS
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST)
# define HAVE_USB 1
#else
# warning "CONFIG_STM32_OTGHS is enabled but neither CONFIG_USBDEV nor CONFIG_USBHOST"
# undef HAVE_USB
#endif
#ifndef CONFIG_STM32F407_USBHOST_PRIO
# define CONFIG_STM32F407_USBHOST_PRIO 100
#endif
#ifndef CONFIG_STM32F407_USBHOST_STACKSIZE
# define CONFIG_STM32F407_USBHOST_STACKSIZE 1024
#endif
/************************************************************************************
* Private Data
************************************************************************************/
#ifdef CONFIG_USBHOST
static struct usbhost_connection_s *g_usbconn;
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Name: usbhost_waiter
*
* Description:
* Wait for USB devices to be connected.
*
************************************************************************************/
#ifdef CONFIG_USBHOST
static int usbhost_waiter(int argc, char *argv[])
{
struct usbhost_hubport_s *hport;
uvdbg("Running\n");
for (;;)
{
/* Wait for the device to change state */
DEBUGVERIFY(CONN_WAIT(g_usbconn, &hport));
uvdbg("%s\n", hport->connected ? "connected" : "disconnected");
/* Did we just become connected? */
if (hport->connected)
{
/* Yes.. enumerate the newly connected device */
(void)CONN_ENUMERATE(g_usbconn, hport);
}
}
/* Keep the compiler from complaining */
return 0;
}
#endif
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called from stm32_usbinitialize very early in inialization to setup USB-related
* GPIO pins for the STM32F4Discovery board.
*
************************************************************************************/
void stm32_usbinitialize(void)
{
/* The OTG HS has an internal soft pull-up. No GPIO configuration is required */
/* Configure the OTG HS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32_OTGHS
stm32_configgpio(GPIO_OTGHS_VBUS);
stm32_configgpio(GPIO_OTGHS_PWRON);
stm32_configgpio(GPIO_OTGHS_OVER);
#endif
}
/***********************************************************************************
* Name: stm32_usbhost_initialize
*
* Description:
* Called at application startup time to initialize the USB host functionality.
* This function will start a thread that will monitor for device
* connection/disconnection events.
*
***********************************************************************************/
#ifdef CONFIG_USBHOST
int stm32_usbhost_initialize(void)
{
int pid;
int ret;
/* First, register all of the class drivers needed to support the drivers
* that we care about:
*/
uvdbg("Register class drivers\n");
#ifdef CONFIG_USBHOST_HUB
/* Initialize USB hub class support */
ret = usbhost_hub_initialize();
if (ret < 0)
{
udbg("ERROR: usbhost_hub_initialize failed: %d\n", ret);
}
#endif
#ifdef CONFIG_USBHOST_MSC
/* Register the USB mass storage class class */
ret = usbhost_msc_initialize();
if (ret != OK)
{
udbg("ERROR: Failed to register the mass storage class: %d\n", ret);
}
#endif
#ifdef CONFIG_USBHOST_CDCACM
/* Register the CDC/ACM serial class */
ret = usbhost_cdcacm_initialize();
if (ret != OK)
{
udbg("ERROR: Failed to register the CDC/ACM serial class: %d\n", ret);
}
#endif
/* Then get an instance of the USB host interface */
uvdbg("Initialize USB host\n");
g_usbconn = stm32_otghshost_initialize(0);
if (g_usbconn)
{
/* Start a thread to handle device connection. */
uvdbg("Start usbhost_waiter\n");
pid = task_create("usbhost", CONFIG_STM32H407_USBHOST_PRIO,
CONFIG_STM32H407_USBHOST_STACKSIZE,
(main_t)usbhost_waiter, (FAR char * const *)NULL);
return pid < 0 ? -ENOEXEC : OK;
}
return -ENODEV;
}
#endif
/***********************************************************************************
* Name: stm32_usbhost_vbusdrive
*
* Description:
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG HS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_HS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
* iface - For future growth to handle multiple USB host interface. Should be zero.
* enable - true: enable VBUS power; false: disable VBUS power
*
* Returned Value:
* None
*
***********************************************************************************/
#ifdef CONFIG_USBHOST
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
stm32_gpiowrite(GPIO_OTGHS_PWRON, false);
}
else
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGHS_PWRON, true);
}
}
#endif
/************************************************************************************
* Name: stm32_setup_overcurrent
*
* Description:
* Setup to receive an interrupt-level callback if an overcurrent condition is
* detected.
*
* Input Parameters:
* handler - New overcurrent interrupt handler
*
* Returned Value:
* Old overcurrent interrupt handler
*
************************************************************************************/
#ifdef CONFIG_USBHOST
xcpt_t stm32_setup_overcurrent(xcpt_t handler)
{
return stm32_gpiosetevent(GPIO_OTGHS_OVER, true, true, true, handler);
}
#endif
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
#ifdef CONFIG_USBDEV
void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
ulldbg("resume: %d\n", resume);
}
#endif
#endif /* CONFIG_STM32_OTGHS */

118
configs/olimex-stm32-h407/src/stm32_userleds.c Normal file
View file

@ -0,0 +1,118 @@
/****************************************************************************
* configs/olimex-stm32-h405/src/stm32_leds.c
*
* Copyright (C) 2014-2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/power/pm.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32.h"
#include "olimex-stm32-h407.h"
#ifndef CONFIG_ARCH_LEDS
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/* This array maps an LED number to GPIO pin configuration */
static uint32_t g_ledcfg[BOARD_NLEDS] =
{
GPIO_LED_STATUS
};
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: board_userled_initialize
****************************************************************************/
void board_userled_initialize(void)
{
/* Configure LED1-4 GPIOs for output */
stm32_configgpio(GPIO_LED_STATUS);
}
/****************************************************************************
* Name: board_userled
****************************************************************************/
void board_userled(int led, bool ledon)
{
if ((unsigned)led < BOARD_NLEDS)
{
stm32_gpiowrite(g_ledcfg[led], ledon);
}
}
/****************************************************************************
* Name: board_userled_all
****************************************************************************/
void board_userled_all(uint8_t ledset)
{
stm32_gpiowrite(GPIO_LED_STATUS, (ledset & BOARD_LED1_BIT) != 0);
}
#endif /* !CONFIG_ARCH_LEDS */