Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This patch fixed userspace headers conflict. Architecture-related definition and API should not be exposed to users.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
currently, nuttx implements readv/writev on the top of read/write.
while it might work for the simplest cases, it's broken by design.
for example, it's impossible to make it work correctly for files
which need to preserve data boundaries without allocating a single
contiguous buffer. (udp socket, some character devices, etc)
this change is a start of the migration to a better design.
that is, implement read/write on the top of readv/writev.
to avoid a single huge change, following things will NOT be done in
this commit:
* fix actual bugs caused by the original readv-based-on-read design.
(cf. https://github.com/apache/nuttx/pull/12674)
* adapt filesystems/drivers to actually benefit from the new interface.
(except a few trivial examples)
* eventually retire the old interface.
* retire read/write syscalls. implement them in libc instead.
* pread/pwrite/preadv/pwritev (except the introduction of struct uio,
which is a preparation to back these variations with the new
interface.)
Using ONESHOT_CURRENT retrieves the tick number multiplied by tick time; thus
it doesn't give the accurate monotonic time - it is quantized by
the tick time. This cannot be used as a ndelay timer, it would always loop
at least to the end of the ongoing tick.
Revert the up_udelay to use the original "coarse" looping. The "accurate" udelay,
if such is needed, should either be done under arch specific code, or there should be
a function for getting the accurate time that is available for all the platforms.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
When using alarm_arch implementation, 64-bit time can be returned. Using unsign long will cause precision loss.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
When monitoring multiple capture channels, the `ioctl` function
is called three times, leading to significant overhead mainly due
to VFS and `nxmutex_lock/unlock`. Adding a new interface can save
the overhead of two `ioctl` calls.
Signed-off-by: yangguangcai <yangguangcai@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
MCP794XX supports digital trimming that periodically adds or subtracts
clock cycles, resulting in small adjustments in the internal timing.
This way inaccuracies of clock source can be compensated.
This commit adds option to set the trimming register for MCP794XX.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit adds configuration option CONFIG_MCP794XX_DATETIME_UTC.
If set, the datetime is stored in UTC instead of local time. The
default value is kept at local time to keep backwards compatibility
with devices currently using the RTC.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Use private naming to avoid conflicts with user applications
In file included from libuv/src/unix/internal.h:25,
from libuv/src/unix/udp.c:23:
libuv/src/uv-common.h:57: warning: "container_of" redefined
57 | #define container_of(ptr, type, member) \
|
In file included from nuttx/include/nuttx/list.h:47,
from nuttx/include/nuttx/tls.h:40,
from nuttx/include/nuttx/sched.h:48,
from nuttx/include/nuttx/arch.h:87,
from nuttx/include/nuttx/userspace.h:35,
from nuttx/include/nuttx/mm/mm.h:30,
from nuttx/include/nuttx/kmalloc.h:34,
from nuttx/include/nuttx/lib/lib.h:31,
from nuttx/include/stdio.h:35,
from apps/system/libuv/libuv/include/uv.h:59,
from libuv/src/unix/udp.c:22:
nuttx/include/nuttx/nuttx.h:48: note: this is the location of the previous definition
48 | #define container_of(ptr, type, member) \
|
Signed-off-by: chao an <anchao@lixiang.com>
Previous adjtime() implementation was limited to adjusting system
timer tick period. This commit reimplements the internals to use
a kernel watchdog timer. Platform-independent part of the code now
works also for adjusting hires RTC and tickless timer rate.
User code facing API is unchanged. Architecture code API has changed:
up_adj_timer_period() is replaced by up_adjtime().
Other improvements:
- Support query of remaining adjustment by passing NULL to first
argument of adjtime(). This matches Linux behavior.
- Improve resolution available for architecture driver, previously
limited to 1 microsecond per tick. Now 1 nanosecond per second.
When the system starts up, the hw count may not start counting from 0,
which can cause the processing time of the first oneshot handler to be
too long. Therefore, the current tick value should be set based on the
hw count during initialization.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Documentation for PWMIOC_SETCHARACTERISTICS ioctl command mentioned
that this command will neither start nor stop the pulsed output. This
however is incorrect as PWMIOC_SETCHARACTERISTICS command leads to
pwm_start() function which starts the pulsed output.
While this might not be the correct behaviour (I would probably welcome
the option to set PWM characteristics without starting the pulsed output)
it is the way the PWM driver is coded for many architectures. Future
enhancement might be to add function pwm_setchar() for example to just
set characteristics without starting the PWM output.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Adding the CONFIG_ARCH_PERF_EVENTS configuration to enable
hardware performance counting，solve the problem that some platform
hardware counting support is not perfect, you can choose to use
software interface.
This is configured using CONFIG_ARCH_PERF_EVENTS, so weak_functions
are removed to prevent confusion
To use hardware performance counting, must:
1. Configure CONFIG_ARCH_PERF_EVENTS, default selection
2. Call up_perf_init for initialization
Signed-off-by: wangming9 <wangming9@xiaomi.com>
The memory allocated with strdup and asprintf is done via lib_malloc
so we need to use lib_free to deallocate memory otherwise the assertion
"Free memory from the wrong heap" is hit with flat mode and user separated
heap enabled mode.
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
wdog_notifier() will be called in _assert to keep the crash scene
as mush as possible, which is useful for debug.
But once disable the watchdog, the hardware watchdog can not reboot
the system too. If a crash happened in the _assert (e.g. the tcb sp
has been corrupted, system will crash again in tack stack dump),
system will crashing forever and can not reboot.
So add a config to disable this feature by default and can be enable
if anyone need it.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
The implementation of up_perf_*() is in a different static library in nuttx:
Hardware: libarch.a
Software: libdrivers.a (weak function)
Since functions with weak attributes cannot be correctly replaced in multiple static libraries,
this PR will use macros to replace whether the arch supports hardware perf events
Signed-off-by: chao an <anchao@xiaomi.com>
