reason:
1 To improve efficiency, we mimic Linux's behavior where preemption disabling is only applicable to the current CPU and does not affect other CPUs.
2 In the future, we will implement "spinlock+sched_lock", and use it extensively. Under such circumstances, if preemption is still globally disabled, it will seriously impact the scheduling efficiency.
3 We have removed g_cpu_lockset and used irqcount in order to eliminate the dependency of schedlock on critical sections in the future, simplify the logic, and further enhance the performance of sched_lock.
4 We set lockcount to 1 in order to lock scheduling on all CPUs during startup, without the need to provide additional functions to disable scheduling on other CPUs.
5 Cpu1~n must wait for cpu0 to enter the idle state before enabling scheduling because it prevents CPUs1~n from competing with cpu0 for the memory manager mutex, which could cause the cpu0 idle task to enter a wait state and trigger an assert.
size nuttx
before:
text data bss dec hex filename
265396 51057 63646 380099 5ccc3 nuttx
after:
text data bss dec hex filename
265184 51057 63642 379883 5cbeb nuttx
size -216
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
wd_timer handler will change current task, so need process
scheduler before wd timer handler, Ensure that the current
task is not updated before the RR process
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
nxsem_tickwait correctly sleeps more than 1 tick. But nxsem_tickwait_uninterruptible
may wake up to a signal (with -EINTR), in which case the tick + 1 must also
be taken into account. Otherwise the nxsem_tickwait_uninterruptible may
wake up 1 tick too early.
Also fix the nxsem_tickwait to return with -ETIMEDOUT if called with delay 0.
This is similar to e.g. posix sem_timedwait.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
1. extract dump from assert main flow
2. use OSINIT_PANIC for fatal error.
3. fix the method to judge kernel thread.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
1.nxsem_post wake up nxsched_smp_call;
2.stack smp_call_data_s may return;
3.nxsched_smp_call_handler access call_data->lock is not safety;
so adjust the unlock order
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1. mainly for long time within critical_section
2. move out memcpy buffer from enter_critical_section()
3. let mq_send() return fail when mq buffer full in ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
LD: nuttx.elf
ld: /home/ligd/platform/mainline/nuttx/staging/libsched.a(mq_sndinternal.o): in function `wd_start_realtime':
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274: undefined reference to `clock_realtime2absticks'
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274:(.text+0xad): relocation truncated to fit: R_X86_64_PLT32 against undefined symbol `clock_realtime2absticks'
ld: /home/ligd/platform/mainline/nuttx/staging/libsched.a(mq_rcvinternal.o): in function `wd_start_realtime':
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274: undefined reference to `clock_realtime2absticks'
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274:(.text+0xad): relocation truncated to fit: R_X86_64_PLT32 against undefined symbol `clock_realtime2absticks'
make[1]: *** [Makefile:128: nuttx.elf] Error 1
make: *** [tools/Unix.mk:551: nuttx.elf] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
The feature depends on ARCH_USE_SEPARATED_SECTION
the different memory area has different access speed and cache
capability, so the arch can custom allocate them based on
section names to achieve performance optimization
test:
sim:elf
sim:sotest
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
reason:
Currently, if we need to schedule a task to another CPU, we have to completely halt the other CPU,
manipulate the scheduling linked list, and then resume the operation of that CPU. This process is both time-consuming and unnecessary.
During this process, both the current CPU and the target CPU are inevitably subjected to busyloop.
The improved strategy is to simply send a cross-core interrupt to the target CPU.
The current CPU continues to run while the target CPU responds to the interrupt, eliminating the certainty of a busyloop occurring.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1.call_data->refcount is not remote_cpus;
2.nxsched_smp_call_add enqueue the call_data;
3.maybe nxsched_smp_call_handler is just doing;
4.dequeue the call_data but call_data->refcount is not corret;
5.unpredictability case will occur;
reason:
1In the scenario of active waiting, context switching is inevitable, and we can eliminate redundant judgments.
code size
before
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
263324 49985 63893 377202 5c172 nuttx
reduce code size by -476
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
This commit simplified thread ID dispatching logic by integrating it into the `nxsig_dispatch` function.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
When statistics when sched_cpuload_critMonitor, thread switching only
calculates the current CPU's running time. Other CPU running threads
are updated for updates
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Converted the timer overrun check from a loop-based approach to a division-based method. This change ensures a deterministic worst-case execution time (WCET), even if it might not outperform the loop in average scenarios.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This patch added support for SIGEV_THREAD_ID and sigev_notify_thread_id.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
