Split nucleo-f4x1re into nucleo-f401re and nucleo-f411re.
These are separate boards and should be in separate directories as it's
done for all other nucleo boards in NuttX
reason:
When entering an exception or interrupt, there are two sets of registers:
one is the "running regs", which we need to save,
and the other is the "ready to running regs", which we may soon use.
For consistency in logic, we can always store the "running regs" in the regs field of g_running_tasks,
otherwise it may lead to errors in the storage location of the "running regs."
When we need to access the "running regs," we should uniformly retrieve them from the regs field of g_running_tasks.
As the next step, we will rename the set_current_regs/up_current_regs functions
for each architecture to more appropriate names, solely for the purpose of identifying interrupts.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
enable various types of common applications and libraries, and enable CMake CI checks.
To avoid regression issues in the build system
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
added shell script darwin_arm64.sh for macOS Apple Silicon
updated toolchains for macOS on Apple Silicon
- arm64
- aarch64
- xpack-riscv
- xtensa-esp32
Improved
1. The pre-installed "picotool" should not depend on `PICO_SDK_PATH`
2. Perhaps we should compile "picotool" from `PICO_SDK_PATH` if it was not found in $PATH
Tests
1. The "picotool" is pre-installed or built from `PICO_SDK_PATH`
LD: nuttx
Generating: nuttx.uf2
Done.
2. `PICO_SDK_PATH` is specified but "picotool" is not installed
LD: nuttx
Building: picotool
Generating: nuttx.uf2
Done.
3. Neither "picotool" nor `PICO_SDK_PATH` are installed/specified
LD: nuttx
PICO_SDK_PATH/picotool must be specified/installed for flash boot
Signed-off-by: wangjianyu3 <wangjianyu3@xiaomi.com>
1. bin and kbin folders are dynamically generated
2. Context comes before depend, so the bin and kbin folders are created in the context construction phase. When the depend process comes, each library is downloaded, and a relative bin/xxx and kbin/xxx directory is created for each library to place files. This is to prevent duplicate file names.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Calling CLEAN on these folders did not have any effect
2. bin,kbin will be created during the context construction process
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
fixed this error for msys2
====================================================================================
Configuration/Tool: nucleo-l152re/nsh,CONFIG_ARM_TOOLCHAIN_GNU_EABI
2024-11-05 06:12:26
------------------------------------------------------------------------------------
Cleaning...
Configuring...
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
make[3]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
use the dynamic library .so of the binding compilation environment,
and then modify the dynamic loader of elf at runtime to run sim elf across system versions
1.add post-build for sim build
2.collect dynamic .so and dynamic interpreter
3.add execution script for the entire package sim elf
change text-segment to 0x50000000
because patchelf will modify the .dynamic section in elf,
the upward alignment of elf will be less than 0x3fffffff,
which will cause asan shadow memory overlap error
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
1. Since the implementation of gcov has changed since clang17, versions before clang17 need to use the libunwind.a file
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. CONFIG_ARCH_COVERAGE has been replaced by CONFIG_SCHED_GCOV
2. Delete the SIM-specific GCOV_ALL configuration and change it to a universal configuration for all architectures
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
tmpfile.rename(args.output)
^^^^^^^^^^^^^^
AttributeError: '_io.BufferedRandom' object has no attribute 'rename'. Did you mean: 'name'?
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
1. enable CONFIG_BUILTIN_COMPILER_RT to built libclang_rt.builtins-xxx.a and no longer use the compiler's built-in
2. Modify clang version acquisition to get two decimal points
3. It has been ported to support four architectures: ARM, ARM64, RISCV, and x86_64, among which ARM has been validated
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
To skip the style issue:
arch/arm/src/phy62xx/uart.c:59:15: error: Mixed case identifier found
arch/arm/src/phy62xx/uart.c:64:2: error: Mixed case identifier found
arch/arm/src/phy62xx/uart.c:65:2: error: Mixed case identifier found
arch/arm/src/phy62xx/uart.c:70:2: error: Mixed case identifier found
arch/arm/src/phy62xx/uart.c:71:2: error: Mixed case identifier found
arch/arm/src/phy62xx/uart.c:75:2: error: Mixed case identifier found
arch/arm/src/phy62xx/uart.c:77:7: error: Mixed case identifier found
Signed-off-by: chao an <anchao@lixiang.com>
This PR splits the CI Build Job sim-01 and adds sim-03:
Before the Split: Simulator Jobs take up to 1.5 hours to complete
- sim-01 (1 hour 31 mins): adb, citest, lvgl, matter
- sim-02 (28 mins): posix_test, sqlite
After the Split: Simulator Jobs will complete within 1 hour
- sim-01 (58 mins): adb, citest
- sim-02 (35 mins): lvgl, matter
- sim-03 (28 mins): posix_test, sqlite
This will help us comply with the ASF Policy for GitHub Actions, as explained here: https://github.com/apache/nuttx/issues/14376
The error was introduced by #14393, which was intended to fix this
line for MacOS. This commit makes this line dependent on the host
OS to avoid any compilation errors.
nucleo-144 combines 3 different ST boards. This approach is inconsistent with
the support for the rest of the nucleo boards, where each board is in separate folders.
Also nucleo-144 is no longer reserved for STM32F7 chips but other families also use this format.
After this commit nucleo-144 is divided into 3 boards:
- nucleo-f746zg
- nucleo-f767zi
- nucleo-f722ze
This PR creates the new CI Build Jobs `arm64-01` and `x86_64-01`. The new jobs will split and offload the Arm64 and x86_64 Build Targets from `other`. This will reduce our usage of GitHub Runners, to comply with the ASF Policy for GitHub Actions. (Recently we see more PRs for Arm64 and x86_64)
Before the Split: Simple PRs (One Arch and/or One Board) for Arm64 and x86_64 require almost 1 hour for CI Build
- `other` (57 mins): AVR, SPARC, x86, PinePhone, QEMU Arm64, QEMU x86_64
After the Split: Simple PRs for Arm64 and x86_64 will complete under 30 mins
- `other` (24 mins): AVR, SPARC, x86
- `arm64-01` (29 mins): PinePhone, QEMU Arm64
- `x86_64-01` (9 mins): QEMU x86_64
To skip more unnecessary builds: Our Build Rules `arch.yml` shall ignore the label "Area: Documentation", so that a Simple PR + Docs is still a Simple PR. Previously we experienced longer CI Build Times, just because we added docs to our Simple PR. (Now our PR shall be built exactly like a Simple PR)
The updated CI code is explained here: https://github.com/apache/nuttx/issues/13775
Renamed savedefconfig -> refreshsilent name more consistent with the refresh stage for cmake on github.
Added new savedefconfig to fix
https://github.com/apache/nuttx/issues/14281
Flag --diff will output the changes content.
Flag --check-only will return exit code. It can be used together with --diff.
Run isort again to format the code in place, to make the behavior same as before.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Config multi line output to mode 3, so isort and black can agree with
each other:
```
3 - Vertical Hanging Indent
from third_party import (
lib1,
lib2,
lib3,
lib4,
)
```
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Use showsize.sh to show custom elf file top10 size
tools/showsize.sh vela_ap.elf
tools/showsize.sh vela_audio.elf
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
When using include command in defconfig, it is necessary to support overwriting the configuration in other files
kconfig-conf only prints warnings, but does not return errors
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
When some coverage files cannot be parsed correctly,
skip the current error file and continue to generate coverage report
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
To speed up the CI Workflow, this PR splits the CI Build Jobs for RISC-V into smaller jobs. Each job will now complete within 1 hour.
Before the PR: There are 2 jobs for RISC-V, each requiring more than 1.5 hours
- `risc-v-01` (1 hour 42 mins): BL602, Ox64, ESP32-C3 / C6 / H2
- `risc-v-02` (1 hour 41 mins): K230, Icicle, QEMU, RV32M1-Vega
After the PR: The build is spread across 6 jobs for RISC-V, each job completes within 1 hour
- `risc-v-01` (19 mins): BL602, Ox64
- `risc-v-02` (44 mins): ESP32-C3
- `risc-v-03` (45 mins): ESP32-C6, ESP32-H2
- `risc-v-04` (31 mins): K230, Icicle
- `risc-v-05` (41 mins): QEMU CITest
- `risc-v-06` (38 mins): Rest of QEMU, RV32M1-Vega
Following the same convention as the Arm32 Build Jobs, the above jobs are sorted by Target Name. Performance of the RISC-V Build Jobs is discussed in https://github.com/apache/nuttx/issues/13775
Check g_altpath. If only the CURRENT path is included,
the obj target use its own full path, otherwise just use the filename.
add default value current path for obj-path.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
patches ending with cmake should be checked.
Currently, any non-cmake files containing cmake keywords will be checked.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
CI Build Job `arm-05` (runtime 2 hours) has become the Performance Bottleneck for CI Workflow. That's because `arm-05` builds too many targets for nRF, RP2040, SAM 3, SAM A and SAM D. This PR splits `arm-05` into multiple smaller jobs, to reduce the CI Build Duration.
Before the PR: `arm-05` is overloaded, build requires 2 hours
- `arm-05` (2 hours): nRF, RP2040, SAM 3, SAM A, SAM D
- `arm-06` (56 mins): STM32 [a-m]*
After the PR: `arm-05` is offloaded (to `arm-06` and `arm-07`), completes within 1 hour
- `arm-05` (47 mins): nRF
- `arm-06` (1 hour): Reserve for RP2040 exclusively
- `arm-07` (1 hour 15 mins): SAM 3, SAM A, SAM D, STM32 [a-m]*
Build Jobs are sorted by Target Name. So we cascade the changes and rename the Build Jobs: `arm-07` becomes `arm-08`, `arm-08` becomes `arm-09` etc. Then `arm-13` becomes a new job `arm-14`. (Which we added to `build.yml`)
Performance of `arm-05` is discussed in https://github.com/apache/nuttx/issues/13775 and https://github.com/apache/nuttx/issues/12773
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
Add the new symbol `NativeSymbol` to the white list,
and update the comments about the symbols that are
from WAMR project.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
This script seems to assume GNU grep, which is not commonly
available as "grep" on some platforms. For examples, it's
more common to have it named "ggrep" on BSD-based systems
including macOS.
Ideally, I suppose we should avoid GNU dependencies like this
in general. But I'm not motivated enough to rewrite this script
in a portable way today.
cf. https://www.gnu.org/software/grep/manual/grep.html#grep-Programs-1
Switch wget to cURL tool for:
arm_gcc_toolchain()
arm64_gcc_toolchain()
gperf()
riscv_gcc_toolchain()
sparc_gcc_toolchain()
xtensa_esp32_gcc_toolchain()
wasi_sdk()
Used git clone --depth 1 a shallow clone with a history truncated to reduce the clone size for:
kconfig_frontends()
added ninja installation
Switch wget to cURL tool for:
arm_gcc_toolchain()
arm64_gcc_toolchain()
riscv_gcc_toolchain()
sparc_gcc_toolchain()
xtensa_esp32_gcc_toolchain()
xtensa_esp32s2_gcc_toolchain()
xtensa_esp32s3_gcc_toolchain()
wasi_sdk()
Used git clone --depth 1 a shallow clone with a history truncated to reduce the clone size for:
kconfig_frontends()
Bumps esptool from 4.7.0 to 4.8.0.
Switch wget to cURL tool
arm_gcc_toolchain()
arm64_gcc_toolchain()
riscv_gcc_toolchain()
sparc_gcc_toolchain()
xtensa_esp32_gcc_toolchain()
xtensa_esp32s2_gcc_toolchain()
xtensa_esp32s3_gcc_toolchain()
Create a shallow clone with a history truncated of
gen_romfs()
kconfig_frontends()
Simple tool to generate the NuttX release notes
tested on Python-3.8.9
Requirements
pip install PyGithub
pip install PyInquirer
pip install tqdm
The following arguments are required for generating a release: release_version, gh_token
Inspired by https://github.com/btashton/nxutils
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
The script can decode the backtrace dump, considering the syntax
of the backtrace format (properly handle the dump when SMP is
enabled, for instance) based on chip name or the toolchains's
addr2line tool.
1. Similar to asan, supports single byte out of bounds detection
2. Fix the script to address the issue of not supporting the big end
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Since the size of the shadow area will change during the script merging of global variables, it will lead to unpredictable number of links. After fixing, only three links are required.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Modify the Kasan global variable script to support array storage of region addresses
2. Due to the lack of formatting in the previous attempt, a formatting script was created
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
The simple improvement is designed to speed up compilation and reduce download errors on github and local.
Added a folder nxtmpdir for storing third-party packages
nuttxworkspace
|
|- nuttx
|- apps
|- nxtmpdir
tools/Unix.mk:
added export NXTMPDIR := $(WSDIR)/nxtmpdir
tools/configure.sh:
added option -S creates the nxtmpdir folder for third-party packages.
tools/Config.mk:
added macro
CLONE - Git clone repository.
CHECK_COMMITSHA - Check if the branch contains the commit SHA-1.
tools/testbuild.sh:
added option -S
For now I added in the folder this package
ESP_HAL_3RDPARTY_URL = https://github.com/espressif/esp-hal-3rdparty.git
ARCH
arch/xtensa/src/esp32/Make.defs
arch/xtensa/src/esp32s2/Make.defs
arch/xtensa/src/esp32s3/Make.defs
arch/risc-v/src/common/espressif/Make.defs
arch/risc-v/src/esp32c3-legacy/Make.defs
but you can also add other packages (maybe also of apps)
maintains the same semantics as Kernel’s module build
and compatible with Kconfiglib implementation.
The problem of kconfiglib not being able to use tri-states is this:
linux is here torvalds/linux@6dd85ff
The module option is extracted from one of the triate three states into a MODULE keyword.
Kconfiglib supports the default implementation of module to be MODULE for compatibility with the linux kernel, and triate degenerates into bool two states
Refer to this code: 061e71f7d7/kconfiglib.py (L4274-L4284)
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Since the introduction of the rp2350, the pico-sdk project has been
re-arranged and elf2uf2 has been merged in to a new 'picotool' binary
which is supplied and installed separately.
Normally ccache places the temporary files in `~/.ccache`, when invoking the container with
`-u <uid>:<gid>`
as e.g. Jenkins does, this might result in a invalid/unknown home folder.
Thus ccache tries to write to `/.ccache` which doesn't exist and the user doesn't have any permissions.
Explicitly set `CCACHE_DIR` to a folder with appropriate permissions.
Copied spi flash files from risc-v
Removed old spiflash from make.defs
KConfig modifications for common spiflash
Added new spiflash entry to make.defs
S2 Board config update
Modifications working on S2. Need fix on ROM function
Board fixes
Deleted old spiflash files
Fixes for smartfs operation
Set new HAL version
Fixed wrong change on S3
The docker image has not been updated we currently use that one
from 22 days ago.
It seems that the error encountered is due to an incomplete download. It will probably work fine if downloaded again..
https://github.com/apache/nuttx/actions/runs/10619683045/job/29437799464#step:7:1339
28.31
28.31 gzip: stdin: unexpected end of file
28.31 tar: Unexpected EOF in archive
28.32 tar: Unexpected EOF in archive
28.32 tar: Error is not recoverable: exiting now
Trying to reduce the size of the docker image, I found files and folders to be deleted.
For now, I have commented Swift from the Dockerfile because the package is too large.
* Fix nxstyle check so it does not report error on comments on the same
line as if statements
* Rework if statement checks
* Report warning instead of error for is statements check fail
Currently concerns only arm.
tools/ci/testlist/msys2.dat:
At the moment I only added the board nucleo-l152re:nsh
.github/workflows/build.yml:
Enabled cmake for msys2
The main objective is to determine if the examples really work or if they have been obsoleted.
The languages included in the list promote good interoperability with the NuttX API (C predominant).
This will show if they are worth integrating in NuttX.
**FFI method**
- Rust: bindgen or c2rust
- D: importC
- Swift: Bridging header or clang modulemap.
- Zig: `@cImport/@cInclude` or translate-c
It can only read the contents of the first buffer, so fblen should be changed to ensure that it can read the second buffer as well.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
The benefit of this approach is that in a multi-core AMP system,
a single coredump might contain memory information from other cores.
By analyzing this coredump along with the corresponding ELF files from
the other cores, you can reconstruct the crash site of those other
cores.
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
If we have a full memory raw dump, we can parse g_tcbinfo, g_npidhash,
and g_pidhash from the ELF to get NuttX thread info,
regardless of the crash dump log file.
support new command in gdb:
info threads
thread id
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
stack dump add new region `show stacks`, but this script is not support
now this is fixed with adding check condition for all lines contains stack word
Signed-off-by: xinbingnan <xinbingnan@xiaomi.com>
Traceback (most recent call last):
File nuttx/tools/parsetrace.py, line 29, in <module>
from pycstruct import pycstruct
ModuleNotFoundError: No module named 'pycstruct'
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
Create the nuttx.asm in the disassembly format using the objdump program.
NOTE:
'>', objdump doesn't take arguments for output file,
but result is printed to standard out, and is redirected.
Signed-off-by: fanjiangang <fanjiangang@lixiang.com>
Signed-off-by: chao an <anchao@lixiang.com>
This PR updates the Docker Image for NuttX CI, so that it builds Rust Apps correctly for QEMU RISC-V 64-bit. We add the Rust Target for `riscv64gc-unknown-none-elf` to the Docker Image.
In the next PR, we will call the Updated Docker Image to [compile the Rust App `leds_rust`](https://github.com/apache/nuttx/pull/12852), at every run of NuttX CI. This will validate whether Rust Apps are built correctly for QEMU RISC-V 64-bit.
Modified Files:
`tools/ci/docker/linux/Dockerfile`: Add Rust Target `riscv64gc-unknown-none-elf` for Docker CI
`tools/ci/platforms/ubuntu.sh`: Same as above, but for Ubuntu CI
`tools/ci/platforms/msys2.sh`: Same as above, but for MSYS2 CI
This PR fixes the build for Rust Apps and D Apps on QEMU RISC-V. Previously the Rust Build selected the [incorrect Rust Target riscv64i-unknown-none-elf](https://lupyuen.github.io/articles/rust5#rust-target-is-incorrect). Now the Rust Build selects the correct Rust Target: riscv64gc-unknown-none-elf.
This PR also fixes the 32-bit RISC-V Target for D Apps. D Targets ("riscv32") are named differently from Rust Targets ("riscv32gc"), this PR restores the correct Target Names.
Note that Rust Apps won't build correctly for QEMU RISC-V 32-bit. This requires a [Rust Custom Target for riscv32gc](https://lupyuen.github.io/articles/rust4#custom-target-for-rust), which will make the NuttX Makefiles much more complicated.
Also note that `hello_d` won't build correctly for 64-bit `rv-virt:nsh64`. To date, NuttX has never supported 64-bit RISC-V for D Apps.
Modified Files:
`tools/Rust.defs`: Rename the RISC-V ISA `imafdc` to `gc` for Rust Targets
`tools/D.defs`: Exclude the RISC-V ISA for D Targets
Rust/D support for RISC-V is broken after https://github.com/apache/nuttx/pull/11549,
since the target triple is quite different bewteen Rust/D toolchain and GCC,
only few RISC-V targets are supported by Rust toolchain now, so it's better to
construct target triple in Rust.defs/D.defs for RISC-V.
tools/testbuild.sh
added option -N Use CMake with Ninja as the backend.
updated help.
added date to print startup board
added HOST=Msys
github/workflows/build.yml
added option -N job docker
This does the following:
1. Fetches mkimage_imx8 (same used with imx9) source code
2. Fetches the ELE / AHAB binary
3. Extracts the ELE / AHAB binary
4. Compiles the mkimage with hostcc
5. Utilizes the mkimage tool to create a bootable SD image,
combining the ELE / AHAB image with the NuttX bootloader
6. dd is used to prepend empty space in place of BL31
7. Outputs sdimage.img which is a bootable binary
8. Removes all binaries, sources code images that have been
downloaded
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
For newer devices, IDF bootloader is not supported because the
devices are able to boot directly into NuttX or use MCUBoot to
enable OTA and security features.
Need to distinguish between 32bit and 64bit registers, format the gdb reply message using struct.pack with correct format.
'<I' is used for 32bit registers, '<Q' for 64bit
Do not raise exeption for unrecognized registers in log, since they are
not used.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
*Note:* ldmd2 is ldc2-wrapper, allow using dmd frontend flags.
This support may be extended to gdc (gnu) if nuttx developers demand it
or are interested in it.
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s2 targets and removes the need
for running 'make bootloader' command for it.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This provides a capable bootloader that may be run from OCRAM.
The OCRAM contains regions that are always zero, so the linker
file avoids those with best effort.
iMX9 infrastructure expects:
- 0x20480000 (Start of OCRAM, AHAB)
- 0x2049a000 (NuttX or SPL)
- 0x204e0000 (ARM Trustzone, not used)
When started from SD-card, the offsets are:
- 0x1f000 with AHAB
- 0xa000 without AHAB
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
fix CI compilation errors:
github/workspace/sources/apps/database/sqlite/sqlite/configure: line 5204: /usr/bin/file: No such file or directory
/github/workspace/sources/apps/database/sqlite/sqlite/configure: line 10376: tclsh: command not found
/github/workspace/sources/apps/database/sqlite/sqlite/configure: line 10812: tclsh: command not found
/github/workspace/sources/apps/database/sqlite/sqlite/configure: line 10826: tclsh: command not found
configure: WARNING: Can't find Tcl configuration definitions
configure: WARNING: *** Without Tcl the regression tests cannot be executed ***
configure: WARNING: *** Consider using --with-tcl=... to define location of Tcl ***
make[4]: warning: -j0 forced in submake: resetting jobserver mode.
/github/workspace/sources/apps/database/sqlite/sqlite/tool/cktclsh.sh: 5: tclsh: not found
make[4]: *** [Makefile:793: has_tclsh84] Error 1
make[4]: Target 'sqlite3.c' not remade because of errors.
make[3]: *** [Makefile:52: context] Error 2
make[2]: *** [Makefile:53: /github/workspace/sources/apps/database/sqlite_context] Error 2
make[2]: Target 'context_all' not remade because of errors.
make[1]: *** [Makefile:175: context] Error 2
make: *** [tools/Unix.mk:452: /github/workspace/sources/apps/.context] Error 2
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This patch fixes the issue reported by PR #12345 where the file
path existent in the second line of each source file on NuttX.
Sometimes the path could be too long and could raise a nxstyle
issue during the CI test.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
* Extends tools/configure.sh default appdir search paths.
* Search for apps in ../nuttx-apps and ../nuttx-apps.git locations.
* This allows -a parameter skip when nuttx-apps or nuttx-apps.git is used.
Signed-off-by Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
This fixes names of program entry and linker script files so that to
support building kernel mode apps using CMake and export package.
flat and protected mode should be the same as before.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
The Simple Boot feature for Espressif chips is a method of booting
that doesn't depend on a 2nd stage bootloader. Its not the
intention to replace a 2nd stage bootloader such as MCUboot and
ESP-IDF bootloader, but to have a minimal and straight-forward way
of booting, and also simplify the building.
This commit also removes deprecated code and makes this bootloader
configuration as default for esp32s3 targets and removes the need
for running 'make bootloader' command for it.
Other related fix, but not directly to Simple Boot:
- Instrumentation is required to run from IRAM to support it during
initialization. `is_eco0` function also needs to run from IRAM.
- `rtc.data` section placement was fixed.
- Provide arch-defined interfaces for efuses, in order to decouple
board config level from arch-defined values.
Signed-off-by: Almir Okato <almir.okato@espressif.com>
This disables the leading spaces removal for block comments to
avoid changing well-formatted blocks.
Based on test with uncrusity 0.72.0+dfsg1-2 on Ubuntu 22.04, the
leading spaces of block comment lines are unexpectedly removed by
current version w/o this patch.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This patch supports listing configs for a given board like
- `tools/configure.sh -L sama5`
- `tools/configure.sh -L rv-virt`
- `tools/configure.sh -L virt`
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Extracting global variable information using scripts:
kasan_global.py:
1. Extract the global variable information provided by the -- param asan globals=1 option
2. Generate shadow regions for global variable out of bounds detection
Makefile:
1. Implement multiple links, embed the shadow area into the program, and call it by the Kasan module
Signed-off-by: W-M-R <mike_0528@163.com>
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
codechecker 6.23.1 requires PyYAML==6.0.1, but you have pyyaml 5.4.1 which is incompatible.
Signed-off-by: chao an <anchao@lixiang.com>
This adds support for multiple ELF files so that to help Kernel build
dump analysis with both nuttx and app ELF files.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
find: boards/risc-v/esp32c3/esp32c3-devkit/configs/cxx: No such file or directory
find: boards/risc-v/esp32c3/esp32c3-devkit/configs/wifi: No such file or directory
The video_controls.h is a public header file, and it is used by
videoio.h. So it should be moved to the include/sys directory.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
function bloaty() Add -D CMAKE_INSTALL_PREFIX="${NUTTXTOOLS}"/bloaty.
Improves workflow execution time because it is now cached.
Changed reference file to calculate the hash for key of actions/cache@v4. Now it is darwin.sh.
The method of passing in parameters to memdump is modified and the
incoming address is added. After traversing the node to which the
address belongs, the memdump command will end.
Signed-off-by: wangmingrong <wangmingrong@xiaomi.com>
./helloxx_main.cxx:29:10: fatal error: cxxabi.h: No such file or directory
29 | #include <cxxabi.h>
| ^~~~~~~~~~
CONFIG_LIBCXXABI is turned on, but the library include is not linked to nuttx/include, causing the compilation to fail.
Signed-off-by: wangmingrong <wangmingrong@xiaomi.com>
This patch adds rv64 targets support and checked with gdb-multiarch
on Ubuntu. It also marks `-arch` parameter optional as it often can
be learnt from ELF file.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This is a wrapper for apps/Make.defs or nuttx/Make.defs
Since apps/Make.defs include nuttx/Make.defs, we check if it the
apps dir is available and include it, otherwise we just include
nuttx/Make.defs and keep the old behavior.
This allows EXTRA_LIBS and some other system-wide tweaks be
applied in any apps and make it work with the nuttx Makefiles.
cibuild.sh -> modify scripts
platforms -> new folder +scripts
add header
tools/ci/platforms: Set the execute permissions on the updated files.
tools/ci/platforms/linux.sh: fix header
Corrected Apache Foundation copyright header.
tools/ci: Modify cibuild.sh to adapt to new platforms.
cibuild.sh -> modify scripts
platforms -> new folder +scripts
add header
tools/ci/platforms: Set the execute permissions on the updated files.
tools/ci: Modify cibuild.sh to adapt to new platforms.
cibuild.sh -> modify scripts
platforms -> new folder +scripts
add header
tools/ci/platforms: Set the execute permissions on the updated files.
tools/ci: Kept the common code in cibuild.sh.
Kept the common code in cibuild.sh.
tools/ci: Storing all Environment Variables in env.sh script.
Added in cibuild.sh this command "source "${CIWORKSPACE}"/tools/env.sh" to activate installed tools.
tools/ci: shared the tools path in cibuild.sh
Added in cibuild.sh enviroment variable "NUTTXTOOLS" for installed tools.
Removed bashisms from scripts darwin.sh, linux.sh, msys2.sh and ubuntu.sh.
tools/ci: Fixed build problems with macOS
Fix Error: /Users/runner/work/nuttx/nuttx/sources/tools/bloaty-src/build is not a directory
There have been errors like below on macOS for sim:libcxxtest
```
Error: /Applications/Xcode.../include/mach/vm_page_size.h:59:44:
error: expected ';' after top level declarator
```
This patch tries to disable that check on macOS.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
