reason:
In the kernel, we are planning to remove all occurrences of up_cpu_pause as one of the steps to
simplify the implementation of critical sections. The goal is to enable spin_lock_irqsave to encapsulate critical sections,
thereby facilitating the replacement of critical sections(big lock) with smaller spin_lock_irqsave(small lock)
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic
-machine virt,virtualization=on,gic-version=3
-net none -chardev stdio,id=con,mux=on -serial chardev:con
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
1 To improve efficiency, we mimic Linux's behavior where preemption disabling is only applicable to the current CPU and does not affect other CPUs.
2 In the future, we will implement "spinlock+sched_lock", and use it extensively. Under such circumstances, if preemption is still globally disabled, it will seriously impact the scheduling efficiency.
3 We have removed g_cpu_lockset and used irqcount in order to eliminate the dependency of schedlock on critical sections in the future, simplify the logic, and further enhance the performance of sched_lock.
4 We set lockcount to 1 in order to lock scheduling on all CPUs during startup, without the need to provide additional functions to disable scheduling on other CPUs.
5 Cpu1~n must wait for cpu0 to enter the idle state before enabling scheduling because it prevents CPUs1~n from competing with cpu0 for the memory manager mutex, which could cause the cpu0 idle task to enter a wait state and trigger an assert.
size nuttx
before:
text data bss dec hex filename
265396 51057 63646 380099 5ccc3 nuttx
after:
text data bss dec hex filename
265184 51057 63642 379883 5cbeb nuttx
size -216
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
wd_timer handler will change current task, so need process
scheduler before wd timer handler, Ensure that the current
task is not updated before the RR process
Signed-off-by: zhangyuan29 <zhangyuan29@xiaomi.com>
nxsem_tickwait correctly sleeps more than 1 tick. But nxsem_tickwait_uninterruptible
may wake up to a signal (with -EINTR), in which case the tick + 1 must also
be taken into account. Otherwise the nxsem_tickwait_uninterruptible may
wake up 1 tick too early.
Also fix the nxsem_tickwait to return with -ETIMEDOUT if called with delay 0.
This is similar to e.g. posix sem_timedwait.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
1. extract dump from assert main flow
2. use OSINIT_PANIC for fatal error.
3. fix the method to judge kernel thread.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
1.nxsem_post wake up nxsched_smp_call;
2.stack smp_call_data_s may return;
3.nxsched_smp_call_handler access call_data->lock is not safety;
so adjust the unlock order
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1. mainly for long time within critical_section
2. move out memcpy buffer from enter_critical_section()
3. let mq_send() return fail when mq buffer full in ISR
Signed-off-by: ligd <liguiding1@xiaomi.com>
LD: nuttx.elf
ld: /home/ligd/platform/mainline/nuttx/staging/libsched.a(mq_sndinternal.o): in function `wd_start_realtime':
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274: undefined reference to `clock_realtime2absticks'
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274:(.text+0xad): relocation truncated to fit: R_X86_64_PLT32 against undefined symbol `clock_realtime2absticks'
ld: /home/ligd/platform/mainline/nuttx/staging/libsched.a(mq_rcvinternal.o): in function `wd_start_realtime':
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274: undefined reference to `clock_realtime2absticks'
/home/ligd/platform/mainline/nuttx/include/nuttx/wdog.h:274:(.text+0xad): relocation truncated to fit: R_X86_64_PLT32 against undefined symbol `clock_realtime2absticks'
make[1]: *** [Makefile:128: nuttx.elf] Error 1
make: *** [tools/Unix.mk:551: nuttx.elf] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
The feature depends on ARCH_USE_SEPARATED_SECTION
the different memory area has different access speed and cache
capability, so the arch can custom allocate them based on
section names to achieve performance optimization
test:
sim:elf
sim:sotest
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
reason:
Currently, if we need to schedule a task to another CPU, we have to completely halt the other CPU,
manipulate the scheduling linked list, and then resume the operation of that CPU. This process is both time-consuming and unnecessary.
During this process, both the current CPU and the target CPU are inevitably subjected to busyloop.
The improved strategy is to simply send a cross-core interrupt to the target CPU.
The current CPU continues to run while the target CPU responds to the interrupt, eliminating the certainty of a busyloop occurring.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1.call_data->refcount is not remote_cpus;
2.nxsched_smp_call_add enqueue the call_data;
3.maybe nxsched_smp_call_handler is just doing;
4.dequeue the call_data but call_data->refcount is not corret;
5.unpredictability case will occur;
reason:
1In the scenario of active waiting, context switching is inevitable, and we can eliminate redundant judgments.
code size
before
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
263324 49985 63893 377202 5c172 nuttx
reduce code size by -476
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
This commit simplified thread ID dispatching logic by integrating it into the `nxsig_dispatch` function.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
When statistics when sched_cpuload_critMonitor, thread switching only
calculates the current CPU's running time. Other CPU running threads
are updated for updates
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Converted the timer overrun check from a loop-based approach to a division-based method. This change ensures a deterministic worst-case execution time (WCET), even if it might not outperform the loop in average scenarios.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This patch added support for SIGEV_THREAD_ID and sigev_notify_thread_id.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
When we do not drop notifier from g_notifier_pending, we need an
isolated dq entry for this queue, otherwise the queued work_s's dq entry
may be modified by the work queue and breaks the chain of
g_notifier_pending.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Return 1 to indicate the work was not cancelled.
Because it is currently being processed by work thread,
but wait for it to finish.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
1 Only the idle task can have the flag TCB_FLAG_CPU_LOCKED.
According to the code logic, btcb cannot be an idle task, so this check can be removed.
2 Optimized the preemption logic check and removed the call to nxsched_add_prioritized.
3 Speed up the scheduling time while avoiding the potential for
tasks to be moved multiple times between g_assignedtasks and g_readytorun.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
After these wdog refactor:
We conducted a latency measurement using the rt-tests/cyclictest (commit cadd661) on an x86_64 NUC12 equipped with an i7-1255U processor and 16GB of LPDDR5 memory. The specific command used for this microbenchmark was cyclictest -q -l 100000 -h 30000, which is designed to assess the responsiveness of the cyclic timer.
The findings from our benchmark are summarized below, highlighting the minimum, median, and maximum latency values for each operating system tested:
Operating System Minimum Latency (us) Median Latency (us) Maximum Latency (us)
Linux 48 53 410
PreemptRT 6 57 148
Xenomai 53 53 64
NuttX 64 626 1212
NuttX (refactor) 1 1 3
In this table, "Min" indicates the shortest latency observed, "Median" represents the middle value of the latency distribution, and "Max" denotes the longest latency encountered.
The systems tested were as follows:
Linux: ACRN version 6.1.80 (commit f528146)
PreemptRT: Linux kernel 5.4.251 with the 5.4.254-rt85 patch applied
Xenomai: Linux kernel 5.4.251 patched with ipipe-core-5.4.239-x86-13
These results clearly demonstrate the varying performance of different operating systems in terms of timer latency, the refactored NuttX showing particularly low latency values.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Now we have CONFIG_USEC_PER_TICK, and for our timer system, all the calculation used 'tick'.
And all the timespec should change to 'tick' before use wd_start(), so USEC2TICK() can NOT be avoided.
Then there must be an 'less then one tick' loss.
One resolution:
ticks++ anyway when wd_start(). But this will caused time expired more a tick.
Another resolution:
Change the testcase, and allow the following logic:
t1 = current_time();
sleep(3);
t2 = current_time();
allow: t2 - t1 >= 3;
(original test must be: t2- t1 > 3)
The original test think the time must be elapse-ing, and the (t2 - t1) must bigger then 3,
but in our system, we use 'tick' as the minimal wdog unit, then there must a precision loss.
Now we choose first resolution.
Signed-off-by: ligd <liguiding1@xiaomi.com>
This patch addresses an issue where the elapsed time was uncorrectly calculated.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
For the nested interrupt, one thing should decleared:
We are in ISR context, but no meaning we are disabled the interrupts.
Signed-off-by: ligd <liguiding1@xiaomi.com>
This patch moved the g_wdtimernested to wd_start.c
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
If g_wdactivelist has been changed in the wdog callback, the list traversal with next pointer will cause problem.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit refactors the wdog module to use absolute time representation internally. The main improvements include:
1. Fixed recursive watchdog handling caused by calling wd_start within watchdog timeout callback function.
2. Simplified timer processing to improve performance and enhance code readability.
3. Improved accuracy of timers.
4. Reduced critical section and interrupt disable time, improving real-time performance.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
reason:
In the SMP, when a context switch occurs, restore_critical_section is executed.
In order to reduce the time taken for context switching,
we inline the restore_critical_section function.
Given that restore_critical_section is small in size
and is called from only one location, inlining it does not increase the size of the image.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
The file descriptors of kernel threads should be clean and should
not be generated based on user threads. Instead, an idle thread
hould be chosen.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
reason:
If the type of tcb is TSTATE_TASK_ASSIGNED, removing it using nxsched_remove_not_running
and then putting it back into the queue may result in a context switch.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Since pthread_mutex is implemented by sem, it is impossible to see in ps who holds the lock and causes the wait.
Replace sem with mutex implementation to solve the above problems
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
reason:
Since smp call handler may lead to context switching,
we need to update the context information by calling up_cpu_paused_[save|restore].
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Make this_cpu is arch independent and up_cpu_index do that.
In AMP mode, up_cpu_index() may return the index of the physical core.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
reason:
dynaminc create g_irqmap to reduce the use of data segments
CONFIG_ARCH_NUSER_INTERRUPTS should be one more than the number of IRQs actually used
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Calling malloc in the critical section may cause thread switching.
Add a retry mechanism to handle the situation where other threads have been successfully expanded.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
enable the scheduler may cause the context to switch to a high-priority task,
which will failure to clear pending events correctly.
Signed-off-by: chao an <anchao@lixiang.com>
reason:
These interfaces are used when we assign interrupt
handling of the same priority to the corresponding priority work queues.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1.work_queue a work which call work_queue again
2.work_cancel_sync the work
3.the work is just calling in workthread
4.work_queue the work again,and post the work_cancel_sync wakeup
5.the work is not canceled
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
"/mnt/yang/qixinwei_cmake/nuttx/sched/sched/sched_removeblocked.c", line 58: warning #188-D:
enumerated type mixed with another type
tstate_t task_state = btcb->task_state;
"/mnt/yang/qixinwei_cmake/nuttx/sched/sched/sched_setpriority.c", line 243: warning #188-D:
enumerated type mixed with another type
tstate_t task_state = tcb->task_state;
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
When a low-priority thread sends a kill signal to a high-priority thread,
the high-priority thread will exit and release tcb. When the thread returns
to the low-priority thread, it will access the released stcb.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
Regression by:
| commit 2ee8aa6f2b
| Author: hujun5 <hujun5@xiaomi.com>
| Date: Thu Jan 11 11:27:31 2024 +0800
|
| sched: we use spin_lock_irqsave replace enter_critical_section to protect g_irqvector
|
| enter_critical_section may be called before os initialized
|
| Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: chao an <anchao@lixiang.com>
Two things need to be done when vfork'ing:
- Must attach to parent's address environment (the addrenv is shared)
- Must allocate a kernel stack (where would the register context go otherwise)
Note that this code assumes the address environment is shared, since we
don't support fork() which would _clone_ the address environment instead.
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
* sched/Kconfig
(INIT_ENTRYPOINT): Document that the signature of "main" must take
"argc" and "argv" or else compilation error results, as discussed in
the email thread below [1].
References:
[1] dev@nuttx.apache.org email thread:
"basically, I get an error when I do make" started 18 Jul 2024,
archived:
https://lists.apache.org/thread/9j2s3647ysdhy204g4ombn4o09bn11c1
and elsewhere.
because 'g_cpu_nestcount[me] > 0' will never happen, in this place
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add support for XSAVE/XRSTOR to handle x86_64 procesor extended states.
Support for these instructions is required to support AVX instruction set
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Kthreads can share the group data so that to reduce overheads.
This implements shared kthread group via:
- use `tcb_s` instead of `task_tcb_s` for kthreads
- use `g_kthread_group` when creating kthreads
- use stackargs to start tasks and kthreads
see pull/12320 for test logs.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Thread args have already been saved to stack after the TLS section by
nxtask_setup_stackargs. This is to retrieve it for use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds pre-allocation and dynamic allocations for sigactions.
Current behavior can be acheived by setting SIG_ALLOC_ACTIONS to
a number larger than 1.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
this_task() is a function call that involves disabling interrupts and this_cpu().
Since restore_critical_section is always called in an interrupt-disabled context,
there's no need to disable interrupts again. Therefore, to save time and achieve
the same effect, I directly call tcb = current_task(me) instead of tcb = this_task().
Signed-off-by: hujun5 <hujun5@xiaomi.com>
we can use g_cpu_lockset to determine whether we are currently in the scheduling lock,
and all accesses and modifications to g_cpu_lockset, g_cpu_irqlock, g_cpu_irqset
are in the critical section, so we can directly operate on it.
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
sched implementation not depends on macro abstraction, so revert below commit:
This reverts commit 4e62d0005a
This reverts commit 0f0c370520
This reverts commit ad0efd04ee
Signed-off-by: chao an <anchao@lixiang.com>
waitpid() cannot be used in kernel mode unless SCHED_HAVE_PARENT is
selected -> add dependency if BUILD_KERNEL is selected.
Why? Because without SCHED_HAVE_PARENT waitpid() works in a non-standard
way, meaning it does not use SIGCHLD to wake the parent, as it should.
Also, returning the child status via stat_loc corrupts memory as stat_loc
points to the parent's address environment:
pid_t nxsched_waitpid(pid_t pid, int *stat_loc, int options)
{
...
group->tg_statloc = stat_loc;
...
}
And later when the status is returned, the child writes to tg_statloc,
which points to the parent's address environment -> random memory
corruption:
static inline void nxtask_exitwakeup(FAR struct tcb_s *tcb, int status)
{
...
if (group->tg_statloc != NULL)
{
*group->tg_statloc = status << 8;
}
...
}
This log appears for NSH internal commands in KERNEL build and
duplicates a lot with task_spawn: log. So drop it to make the
DEBUG_SCHED_INFO logging more readable.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
we removed "select SCHED_RESUMESCHEDULER",
As SCHED_RESUMESCHEDULER is not a necessary feature in SMP,
turning it on by default may affect performance.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20 running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1. The critical section does not prevent task scheduling
2. If the critical section is in sched_lock, there is no need to check,
scheduling is not going to happen
3. If sched_lock is in the critical section, sched_unlock will also
trigger scheduling without waiting for the exit of the critical section
4. After exiting the critical section, if there is an interrupt,
the scheduling will be automatically triggered
Signed-off-by: hujun5 <hujun5@xiaomi.com>
In order to ensure the detached thread obtain the correct return
value from pthread_join()/pthread_cancel(), the detached thread
will create joininfo to save the detached status after thread
destroyed. If there are too many of detached threads in the
process group, the joininfo will consume too much memory.
This is not friendly to embedded MCU devices.
This commit keep the semantics as #11898 was introduced,
will no longer save joininfo for detached threads to avoid wasting memory.
Signed-off-by: chao an <anchao@lixiang.com>
Prior to this commit, doswitch is returned uninitialized if
(task_state == TSTATE_TASK_ASSIGNED || task_state == TSTATE_TASK_RUNNING)
&& no context switch occurs
&& (cpu == me).
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
In SMP mode, up_cpu_index()/this_cpu() are the same, both return the index of the physical core.
In AMP mode, up_cpu_index() will return the index of the physical core, and this_cpu() will always return 0
| #ifdef CONFIG_SMP
| # define this_cpu() up_cpu_index()
| #elif defined(CONFIG_AMP)
| # define this_cpu() (0)
| #else
| # define this_cpu() (0)
| #endif
Signed-off-by: chao an <anchao@lixiang.com>
The overhead of spinlok is less than mutext (mutex need to call
enter_critical section.)
After this patch, `down_write_trylock` and `down_read_trylock` can be
use in interrupt context.
The instruction is protected with mutex only one instruction so using
spinlock is better.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
