enable various types of common applications and libraries, and enable CMake CI checks.
To avoid regression issues in the build system
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Let's turn off kasan to prevent gprof from running recursively. And turn on gprof to add this profile library to the CI build.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Added I2C driver for the STM32H5. This driver uses the STM32H7 I2C driver as a base. The primary difference is setclock dynamically sets the I2C TIMINGR register instead of using hardcoded values. This allows the I2C peripherals to use any of the input clocks and set to any speed 0-1MHz. Additionally, Kconfig options were made available to set the Digital Noise Filter (DNF), Analog Noise Filter, I2C Clock source (i2c_ker_ck), as well as set i2c rise/fall times which are crucial to timing. Care must be taken when setting the clock source and filters, as not all settings are compatible with all i2c clock frequencies.
the link_library of the static target will cause PRIVATE to be inherited to nuttx,
resulting in duplicate linking and definition problems.
because all target static libraries will eventually be linked, there is no need to specify it explicitly.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Interrupts have to be disabled if interrupt worker processes them,
otherwise assertion may occur as another interrupt tries to queue
worker that is not available (because it processes previous interrupts).
Interrupts are re-enabled after the worker leaves the loop processing
previous interrupts.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This patch fix _eronly value which is used during boot process to initialize
.data section to sram.
Since .data section is 4 byte aligned in flash, also _eronly must follow this
alignment to stay coherent with the start address of .data.
If one of the sections preceeding .data has a size which is not 4 byte aligned,
the _eronly value does not match with .data physical address resulting in wrong
copy of data section to sram and thus an almost immediate hardfault.
Signed-off-by: Federico Braghiroli <federico.braghiroli@gmail.com>
Trdc is configured in EL3 bootloader
Clock pre-initialization is also executed there.
Trdc board configuration for imx93evk included
Signed-off-by: Jouni Ukkonen <jouni.ukkonen@unikie.com>
In https://github.com/apache/nuttx/pull/13044,
LIBC_ARCH_ATOMIC was finally removed.
Howerver, the following chips still have the config.
- ARCH_CHIP_ESP32S3
- ARCH_CHIP_ESP32C3_GENERIC
- ARCH_CHIP_ESP32H2
This commit fixes the issue.
====================================================================================
Configuration/Tool: spresense/example_camera,CONFIG_ARM_TOOLCHAIN_GNU_EABI
2024-11-12 12:24:37
------------------------------------------------------------------------------------
Cleaning...
Configuring...
Disabling CONFIG_ARM_TOOLCHAIN_GNU_EABI
Enabling CONFIG_ARM_TOOLCHAIN_GNU_EABI
Building NuttX...
mount/fs_automount.c: In function 'automount_initialize':
Error: mount/fs_automount.c:816:7: error: 'return' with no value, in function returning non-void [-Werror=return-type]
816 | return;
| ^~~~~~
In file included from mount/fs_automount.c:43:
/github/workspace/sources/nuttx/include/nuttx/fs/automount.h:176:11: note: declared here
176 | FAR void *automount_initialize(FAR const struct automount_lower_s *lower);
| ^~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
1. Excerpted from: https://github.com/ARM-software/LLVM-embedded-toolchain-for-Arm/blob/main/samples/src/cpp-baremetal-semihosting-prof/proflib.c
2. Since llvm profile supports more than just gcov, and some features have not yet been explored, two clang gcov implementations are supported after this patch
3. Using this lib only supports the gcov compilation options of "-fprofile-instr-generate -fcoverage-mapping"
4. This file is heavily dependent on the compiler clang version, and is currently aligned with ci, supporting 17.0.1 and below. 18 and above are not supported by this library due to different internal implementations of the compiler
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
