Includes a Mini-UART NSH console for the 4B, tested on the 4GB RAM
model. Part of an I2C driver which can only read, boiler-plate for a SPI
driver, and a GPIO driver with limited pins. Some tools are present for
automatically fetching the boot files and creating the `config.txt` file
based on selected Kconfig options.
- Add support for the IMX95LPD5EVK-19 evaluation kit (M7 core only)
- Firmware can be executed from ITCM, DDR or NOR flash
- configurations:
'nsh' A minimal configuration that only enables nsh shell
on a UART
'rpmsg' This configuration is similar to nsh but in addition
it offers the Remote Processing Messaging (RPMsg) service to
enable heterogeneous inter-core communication.
I think the guy who wants to port NuttX is expected to understand NuttX kernel code and related configurations,
but the getting enough knowledge needs to read the kernel codes deeply.
To reduce the time for NuttX beginner who wants to port,
I tried to make the guide (how to port) based on my porting journey.
This is a follow-up to 366c8a5d94 (PR-15102).
* Documentation/guides/zerolatencyinterrupts.rst
(Title): Make title case consistent.
(Getting Back into the Game, Maskable Nested Interrupts): Clarify discussion
about priorities.
(Cortex-M3/4 Implementation): The first half of a sentence was deleted in
366c8a5d9 because the Kconfig that was described there no longer exists:
CONFIG_ARMV7M_USEBASEPRI. Write a new beginning for this sentence that
matches current implementation.
(Disabling the High Priority Interrupt): Change "cannot" to "must not be
allowed to" to improve clarity.
(Configuring High Priority Interrupts): Change "to NVIC" to "in NVIC" to
improve clarity.
Convenient for qemu debugging and adding ci check
We can learn to use the following command to mount 9pfs on qemu64:
qemu-system-aarch64 -cpu max -nographic \
-machine virt,virtualization=on,gic-version=3,mte=on \
-fsdev local,security_model=none,id=fsdev0,path=/xxxx -device virtio-9p-device,id=fs0,fsdev=fsdev0,mount_tag=host \
-chardev stdio,id=con,mux=on, -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx/nutt
mkdir mnt
mount -t v9fs -o trans=virtio,tag=host mnt
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Split nucleo-f4x1re into nucleo-f401re and nucleo-f411re.
These are separate boards and should be in separate directories as it's
done for all other nucleo boards in NuttX
syslog_putc() have a lot of duplicate logic with syslog_write().
remove syslog_putc() and reuse syslog_write() to simplify syslog printing.
Signed-off-by: chao an <anchao@lixiang.com>
Migrate pages:
* Delayed ACK and TCP Performance
* TCP Network Performance
* NxWM Threading
* Framebuffer Character Driver
From Confluence wiki to official wiki
