### Summary of Changes ###
Running the NuttX simulation 'as fast as possible' breaks the features
that depend on timing: eg. the Bluetooth stack. Enabling this option by
default SIM_WALLTIME=y will introduce delays and will tick the simulation at
a real pace.
Refresh defconfigs for sim targets and add depends on SIM_WALLTIME for
SIM_HCISOCKET.
Signed-off-by: Sebastian Ene <sene@apache.org>
cfsetispeed() now stores baud rate to c_cflag member of
struct termios, so it must not be overridden later on.
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
1.Get the stack pointer from sp instead of .Lstkinit's field
2.Make g_idle_topstack point to the end of the idle stack
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- I noticed that qemu-i486:nsh can not start
- Finally, I found that the issue was introduced by 4910d43ab0
- Actually, nuttx_elf was linked dynamically
- This commit fixes this issue
Impact:
- Affects x86 (32bit) only
Testing:
- Tested with qemu-i486:nsh
Summary:
- During Wi-Fi audio streaming test, I found a deadlock in nxtask_exit()
- Actually, nxtask_exit() was called and tried to enter critical section
- In enter_critical_section(), there is a deadlock avoidance logic
- However, if switched to a new rtcb with irqcount=0, the logic did not work
- Because the 2nd critical section was treated as if it were the 1st one
- Actually, it tried to run the deadlock avoidance logic
- But nxtask_exit() was called with critical section (i.e. IRQ already disabled)
- So the logic did not work as expected because up_irq_restore() did not enable the IRQ.
- This commit fixes this issue by incrementing irqcount before calling nxtask_terminate()
- Also it adjusts g_cpu_irqlock and g_cpu_lockset
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp (smp, ostest, nxplayer, telnetd)
- Tested with sabre-6quad:smp with QEMU (smp, ostest)
- Tested with maix-bit:smp with QEMU (smp, ostest)
- Tested with esp32-core:smp with QEMU (smp, ostest)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During Wi-Fi audio streaming test, I noticed data corruption in tcb
- Finally, I found an issue in IRQ request handing with IPI
- This commit fixes this issue
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- During streaming test, I noticed a dealock when controlling IRQ
- Actually, it will send an IPI when the cpu index is not 0
- However, up_cpu_pause() also sends IPI with critical section
- So the IRQ control must follow the same rule
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The handle_irqreq() is used for remote IRQ control.
- The logic is called via IPI (Inter-Processor Interrupt)
- And the handler should handle only one request
- However, I noticed that the handler handles up to two requests
- This commit fixes this issue
Impact:
- Affects SMP cases only
Testing:
- Tested with spresense:wifi_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Not all boards have an interrupt line from the phy to
the Soc. This commit allows the phy to be polled for
link status.
This may not work on all MAC/PHY combination that
have mutually exclusive link management and operating
modes. The STM32F7 and LAN8742AI do not have such a
limitation.
Summary:
- I noticed that stack for the init task was filled almost 100%
- This commit fixes this issue
Impact:
- Affects spresense:wifi configuration only
Testing:
- Tested with renew/mount/wget/nxplayer commands
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same fix for Arm SMP
Impact:
- Affects SMP only
Testing:
- Tested with esp32-core:smp (qemu)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- Apply the same fix for Arm SMP
Impact:
- Affects SMP only
Testing:
- Tested with maix-bit:smp (qemu)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- I found an issue with up_interrupt_context() when testing.
- And finally found that up_interrupt_context() is not atomic.
- This commit fixes the issue
Impact:
- Affects SMP only
Testing:
- Tested with spresense:wifi_smp and sabre-6quad:smp (qemu)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
ensure the behaviour same before:
commit b76c4672d6 (origin/root)
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Tue Sep 15 17:42:42 2020 +0800
vfs: Create a node as the root of pseudo file system
to remove the special process for root
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
When executing an MRET instruction, MIE is set to MPIE.
In order to branch to up_sigdeliver() with interrupts disabled,
we need to change MPIE, not MIE.
When executing an MRET instruction, MIE is set to MPIE.
In order to branch to up_sigdeliver() with interrupts disabled,
we need to change MPIE, not MIE.
