up_interrupt_context indicates that we self inside interrupt/handler mode,
replaced to private function is_nesting_interrupt to make less confused.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
The case want to determine if a interrupt with higher priority and the
interrupt preemption occurred, but up_interrupt_context indicates that we
self inside interrupt/handler mode. As we previously did not handle the
ramvector interrupt correctly, after update breaked the case. We should
use a more clear private function is_nesting_interrupt.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
during migration from legacy pinout some of the FMC pins were ommited because
their names were identical to the new pinout, which didn't cause a compilation error.
This fixes LCD examples.
Also update incomplete stm32f769i-disco FMC support to avoid this kind of bug in the future
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
1. Kconfig - Removed USART1 config option from STM32_STM32G47XX. Not necessary to adding LPUART functionality. 2. stm32_lowput.c - Added extra check from STM32G4 board because that is the only with LPUART functionality. 2. stm32_serial.c - Removed unneeded function (stm32_serial_get_lpuart). Fixed up_putc return bug. Added configuration for DMAMAP_LPUART RX and TX for STM32G4XXX only. The G4 is the only in this family with LPUART and uses a DMAMUX unlike the others.
1. Removed 1WIRE LPUART refereences in Kconfig and stm32_uart.h. There is no support for LPUART currently in stm32_1wire.c. 2. Removed references to LPUART under DMA_V2 ifdefs. STM32G4 uses DMA_V1, and I saw that none of the chips DMA_V2 (F20, F4) have LPUARTs. AFAIK the only chip in the stm32 folder that has LPUART peripherals is the STM32G4.
Removed unnecessary brackets and empty lines
Added lpuartnsh (LPUART NuttShell) config to the nucleo-g474re board configurations. nsh uses USART3 by default. lpuartnsh uses nsh as a template, changes the serial console to LPUART1, and adds the DMA configs to enable DMA for the LPUART.
Added support for using the lpuart prescaler register. Without prescaling the apbclock, 9600 baud is not supported on the G474RE. By utilizing the prescaler, when necessary, we can support nearly any baud rate (300 baud to 30M Mbaud). lowputc defaults to a prescaler of 16 for the lpuart so standard baud rates (9600 to 115200) are supported early in the boot process. Later in stm32_serial.c the ideal prescaler and BRR values are determined.
Added ifdef statements for LPUART code sections not compatible with other chips.
Changed LPUART BRR calcuation to use 64-bit integers.
Feedback from nuttx pull request. Added brackets around single line if/else statements. Reordered lpuartnsh defconfig file.
Fix lpuart brr calculation after attempting to break the calculation into 2 lines.
Removed TAB
read content of undefinedinsn address, and compare it with what it is in elf to check if there is a ram bit flip
Signed-off-by: liaoao <liaoao@xiaomi.com>
Summary
MPS-521 support Dual Cortex-M33 and maybe suitable for AMP-like
case which is for AUTO OS, the change
1. add support for single core at msp-521 with nsh bringup
2. testing with ostest
TODO:
Dual core support for flat-build
Dual CORE support for Protected Build
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary
1. add Protected build Support for ARM MPS AN500
2. refine mps Memory layout configure and enable MPU support
Note
1. ostest for an547:nsh
2. ostest for an500:nsh and an500:knsh
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
fix previous problemc
added defconfig for weact-stm32h743:nshusb
board.h
Wrong column position or missing blank line before comment: FIX
hopefully last commit
Since the size of the shadow area will change during the script merging of global variables, it will lead to unpredictable number of links. After fixing, only three links are required.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
LD: nuttx
arm-none-eabi-ld: /home/ligd/platform/mainline/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 40 bytes
make[1]: *** [Makefile:212: nuttx] Error 1
make: *** [tools/Unix.mk:538: nuttx] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 16 bytes
Signed-off-by: zhangshoukui <zhangshoukui@xiaomi.com>
After changing sp, following functions calling will result
in unpredictable behavior in case of jumping
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
- Edited linker script for shmem to have condition according to cores selected.
- Added new configuration for nsh_cm7_rptun and nsh_cm4_rptun.
- Appended RPTUN bringup code in stm32_bringup.c
Signed-off-by: Nonpawit Ekburanawat <nonpawit.ek@gmail.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
Make this_cpu is arch independent and up_cpu_index do that.
In AMP mode, up_cpu_index() may return the index of the physical core.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Some domains have a lot of IPv6 addresses. Because of that, it is
not possible to get the IPv4 address with getaddrinfo.
This change separate IPv4 and IPv6 cache size limit to enable to
get both IP addresses.
After the number of threads exceeds the array size, it will not be displayed.
Any number of threads can be displayed using dynamic adaptation
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Prior to this commit, i2c and at24 may be used uninitialized on line
113, 117, 129, and 143 when gd32_at24_wr_test() is called the second
time because these two variables are not static. I don't think making
them static is the correct fix because i2c is released at the end of
this function. Fixed by removing the `if (!initialized)` condition
surrounding the initialization of i2c and at24, making them initialized
at every call to this function.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
After changing sp, following functions calling will result
in unpredictable behavior in case of jumping
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
This reverts both 2afdcfb6a6 and 0a0af89de9 to restore the 128K kflash
design as the implementation depends on that to work, checked with:
```
$ qemu-system-arm -M lm3s6965evb -nographic -device \
loader,file=nuttx.bin,addr=0x0 -device \
loader,file=nuttx_user.bin,addr=0x2000
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adjusts memory.ld to unblock CI issue: `nuttx_user.elf
section '.text' will not fit in region 'uflash'`
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
- New defconfig for nsh CM4 and CM7
- New linker script for cm4
- Update linker script to include shared memory and condition for flash size
- Update Make and CMake file to compile according to core
- Added UART7 pin by default for CM4 serial output
- Changed userled configuration to fix error
Signed-off-by: Nonpawit Ekburanawat <nonpawit.ek@gmail.com>
nucleo-f4229zi board does not come with external ram.
Looking at netnsh config, these changes are also not present.
Issue found when registering i2c char driver for i2ctool. zalloc
returned -ENOMEM
This driver implements `read`, `write`, `open`, `close` and `ioctl`
interfaces to the SHT4X temperature and humidity sensor on an I2C bus.
The read implementation is that of a character driver for easy
debugging, while `ioctl` provides an interface to the sensor's raw data
collection and heating functionality.
These configs are changed based on below rules.
1. always enable +CONFIG_LV_USE_NUTTX=y
2. If touchpad is used, enable +CONFIG_LV_USE_NUTTX_TOUCHSCREEN=y
3. enable log by +CONFIG_LV_USE_LOG=y
4. If -CONFIG_LV_MEM_CUSTOM=y previously defined, replace it with +CONFIG_LV_USE_CLIB_MALLOC=y +CONFIG_LV_USE_CLIB_SPRINTF=y +CONFIG_LV_USE_CLIB_STRING=y
5. If -CONFIG_LV_PORT_USE_FBDEV=y, default config is for fbdev. If -CONFIG_LV_PORT_USE_LCDDEV=y, +CONFIG_LV_USE_NUTTX_LCD=y
6. Remove all -CONFIG_LV_TICK_CUSTOM=y -CONFIG_LV_TICK_CUSTOM_INCLUDE="port/lv_port_tick.h"
7. If -CONFIG_LV_PORT_LCDDEV_DOUBLE_BUFFER=y, replace it with CONFIG_LV_NUTTX_LCD_DOUBLE_BUFFER=y. For fbdev, double buffer is automatically detected.
8. If -CONFIG_LV_COLOR_16_SWAP=y, need to upgrade the LCD driver to support hardware byte order swap.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
according to manual:
The FPU is not affected by any security configuration.
Thus, it appears as not present in PERIPHID[n].PERM
register located in the SPU
This patch allows user to simply select which GPIOs he wants to use
and access them via /dev/gpio_a0 or similar device with standard
gpio driver.
By default gpio names match pin names printed on the board. So when
enabling A3 pin, it will show as /dev/gpio_a3 in runtime. This name
can be changed in kconfig.
User can also select pin function (input, output, interrupt) as well
as standard pin settings like, pull up/down, output type
pushpull/open drain etc.
All pins that are exposed via boards goldpins are listed in Kconfig.
Extra pins that are supported by chiip but are not exposed for easy
usage are not listed.
To have this nice Kconfig configuration and for things to be easily
debugable/understandable it requires code to have big Kconfig and
header file with all possible definitions
Because of file sizes I decided to split gpio related kconfig and
header into separate files. Otherwise it would really make original
files hard to read and find anything.
Signed-off-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
This is copy of raspberrypi-pico with all occurences of raspberrypi replaced by
w5500-evb. Only the usbnsh defconfig is available, which is based on the
raspberrypi-pico:usbnsh defconfig, but enables the WIZnet W5500 Ethernet chip.
TCP/IP for IPv4 and IPv6 is enabled.
Signed-off-by: Michael Jung <michael.jung@secore.ly>
The DS1307 was used as board specific, but it is better move it to
stm32/common to be easily used by other boards as well.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Extracting global variable information using scripts:
kasan_global.py:
1. Extract the global variable information provided by the -- param asan globals=1 option
2. Generate shadow regions for global variable out of bounds detection
Makefile:
1. Implement multiple links, embed the shadow area into the program, and call it by the Kasan module
Signed-off-by: W-M-R <mike_0528@163.com>
1.
In file included from chip/stm32_rtc.c:31:
chip/stm32_rtc.c: In function 'rtchw_set_alrmar':
chip/stm32_rtc.c:761:11: warning: format '%x' expects argument of type 'unsigned int',
but argument 3 has type 'uint32_t' {aka 'volatile long unsigned int'} [-Wformat=]
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ^~~~~~~~~~~~~~~~~~
chip/stm32_rtc.c:761:25: note: format string is defined here
761 | rtcinfo(" ALRMAR: %08x\n", getreg32(STM32_RTC_ALRMAR));
| ~~~^
| |
| unsigned int
| %08lx
2.
arm-none-eabi-ld: staging/libdrivers.a(userled_lower.o): in function `userled_setled':
drivers/leds/userled_lower.c💯 undefined reference to `board_userled'
Regression:
stm32h7/linum-stm32h753bi: add support to leds
Signed-off-by: chao an <anchao@lixiang.com>
Summary:
- This commit applies the fix in https://github.com/apache/nuttx/pull/12025
Impact:
- None
Testing:
- Build only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
adjust link options for userspace elf
specify system libs and apps lib to only link with nuttx target in flat build mode
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
This patch add support to use buttons example on raspberrypi-pico.
Note: unfortunately the raspberry-pico board doesn't have usables
buttons, then you need to add external buttons connected to GPIO16
and GPIO17.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
Purpose: make the the os crash when busyloop with interrupt disable
Follow the arm gicv2 spec, if we want to use the IRQ and FIQ
simultaneously when not using the processor Security Externsions.
We should:
1. IRQ to Group 1 and FIQ to Group 0;
2. Set CICC_CTLR.FIQEn to 1;
Then in NuttX:
1. implement the arm_decodefiq and directly crash in it;
2. provide interface to change the IRQ to FIQ, e.g. change the
watchdog IRQ to FIQ, so the watchdog can trigger even with the
interrupt disabled (up_irq_save() called);
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
This commit adds support to autoleds and userleds for
raspberrypi-pico board. It uses the board LED connected
to GPIO 25.
Signed-off-by: Alan C. Assis <acassis@gmail.com>
