nuttx-update/boards/risc-v
Yanfeng Liu 75d0c2946d risc-v: Initial support for CanMV-k230 board and K230 chip
The code is mainly derived from the NuttX qemu-rv/rv-virt codebase.

Major changes:

- boards/Kconfig:       add new BOARD_K230_CANMV
- arch/risc-v/Kconfig:  add new CHIP_K230 chip and ARCH_RV_MMIO_BITS
- arch/risc-v/src/common/riscv_mtimer.c: use ARCH_RV_MMIO_BITS to
                        select MMIO access width

New additions:

- arch/risc-v/include/k230/: k230 SoC definitions
- arch/risc-v/src/k230/:     k230 SoC sources
- boards/risc-v/k230/canmv230/:  CanMV-K230 board sources and configs
- Documentation/platforms/risc-v/k230/: simple doc

Note that only FLAT build works for canmv230 now.

This PR has changes in RiscV common layer thus may affect other RiscV ports
It changes the mtime/mtimecmp access control from using config ARCH_RV64 to
newly intorduced config ARCH_RV_MMIO_BITS.

Original design uses ARCH_RV64 to select 64bit MMIO in riscv_mtimer.c, this
can't cope with the situation with K230 --- it has ARCH_RV64 but only can do
32bit MMIO. So a new ARCH_RV_MMIO_BITS config has been introduced. Its value
depicts the MMIO width in bits. The MMIO_BITS defaults to 32/64 for RV32/
RV64 respectively. This allows the macro to replace current use of ARCH_RV64
in riscv_mtimer.c.

The new MMIO_BITS config is a derived one, and for RiscV chips with
equal CPU and MMIO widths there is no need to explicitly set it as the
default rule will do that. Only chips with different CPU and MMIO widths
need set it in Kconfig.

So by design this change should be safe but RiscV ports should be checked.

"ostest" verification has been done for:

- canmv230/nsh
- rv-vivt/nsh
- rv-virt/nsh64

configuration generation and manual check of derived RV_MMIO_BITS has been
done for:

- star64/nsh
- arty_a7/nsh
- bl602evb/nsh

Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
2023-12-17 01:10:57 -08:00
..
bl602/bl602evb xmc4/spi: fix typo 2023-11-30 06:16:09 -08:00
bl808/ox64 boards/riscv: Add support for PINE64 Ox64 BL808 SBC 2023-12-15 18:52:16 -08:00
c906/smartl-c906 Documentation: migrate the rest boards 2023-10-26 18:13:34 -03:00
esp32c3 xtensa/esp32s2: Add rtc heap support 2023-11-09 23:58:30 +08:00
esp32c6 build: Replace "$(shell $(INCDIR) $(CC) ...)" with $(INCDIR_PREFIX) 2023-06-23 00:11:25 +03:00
espressif boards/risc-v/esp32c3-generic: Fix MCUboot config name 2023-08-18 14:44:11 +08:00
fe310/hifive1-revb Documentation: migrate the rest boards 2023-10-26 18:13:34 -03:00
hpm6750/hpm6750evk2 Documentation: migrate the rest boards 2023-10-26 18:13:34 -03:00
jh7110/star64 Run refresh.sh to update all board configs 2023-09-02 14:45:44 +08:00
k210/maix-bit Documentation: migrate the rest boards 2023-10-26 18:13:34 -03:00
k230/canmv230 risc-v: Initial support for CanMV-k230 board and K230 chip 2023-12-17 01:10:57 -08:00
litex/arty_a7 Fix Kconfig style 2023-11-08 22:58:26 +08:00
mpfs risc-v/mpfs/opensbi: update opensbi to version 1.3.1 2023-11-21 04:04:47 -08:00
qemu-rv/rv-virt boards: rv-virt: Add virtio-sound 2023-12-14 20:01:25 +08:00
rv32m1/rv32m1-vega Documentation: migrate the rest boards 2023-10-26 18:13:34 -03:00