Register addresses are defined. Bit defintions are still needed.
Bitmaps for OCTOSPI peripheral register
Incremental updates to qspi files
Redefined QSPI/OCTOSPI registers for STM32H5
Fixed register definitions for the STM32H5. However, more work still needs to be done. Some bits that shared registers on the STM32H7 have different register locations on the H5. This still needs to be accounted for.
Fixed more differences vs STM32H7 qspi
Added ifdef for including stm32_dma.h in stm32_qspi.c. Added stm32_qspi.c to Make.defs.
Register fixes. SPI activity but not able to format device yet.
Fixed DCYC mask
Set HCLK frequency to correct value. Undid ccrconfig debug.
Tested Interrupt Mode (single SPI). Added alternate bytes to meminfo and cmdinfo structures. Updated Kconfig variables for STM32H5.
Fixed base register in hardware/stm32_qspi.h. Updated qspi_dumpregs.
The base register was previously set to STM32_QUADSPI_BASE, changed to the correctly named STM32_OCTOSPI1_BASE. However, these defines for the OCTOSPI registers are not even used. Instead qspi_putreg and qspi_getreg utilize the priv->base value to access OCTOSPI registers.
Removed altbytes code, left as before. Moved QSPI clock selection to stm32h5xx_rcc.c
Changed STM32H5_QUADSPI to STM32H5_QSPI1
Added hook to define QSPI_CLK_FREQUENCY as STM32_QSPI_FREQUENCY from board.h
Removed changes to nuttx qspi.h
style fixes
chip/efm32_leserial.c: In function 'efm32_restoreuartint':
Error: chip/efm32_leserial.c:329:37: error: 'len' undeclared (first use in this function); did you mean 'ien'?
329 | efm32_restoreuartint_nolock(priv, len);
| ^~~
| ien
Signed-off-by: hujun5 <hujun5@xiaomi.com>
There were two simple errors when running ci tests on pull #15351. These errors were unrelated to that pull. After investigating I found two simple errors. 1. The len variable was likely a typo that should have been the function argument, ien. 2. The spinlock_t lock was defined in a section dependent on CONFIG_SERIAL_TERMIOS. However, the spinlock_t lock was used in code that did not require the SERIAL_TERMIOS config. Therefore errors resulted.
imxrt_edma_s missing lock variable
CI build tests noted that the variable g_edma was referencing a lock variable that did not exist in the structure. This change adds that missing lock as a spinlock_t type.
Remove unused flags variable from imxrt_dmach_stop
Removed extra =
Fixed comments and indent
Add commit log to OCTOSPI HW PR
Summary
hardware/stm32_qspi.h - Defines for the STM32H5 QSPI driver. The peripheral on the STM32H5 is actually an OCTOSPI peripheral, however it was decided to use it as a QSPI peripheral for the following reasons:
There is currently support for QSPI within Nuttx.
The STM32H7 QSPI register set is very similar to the STM32H5 OCTOSPI register set and the STM32H7 series has an existing QSPI driver.
OCTOSPI devices are rare as of now and are not part of our use case.
hardware/stm32h56xxx_pinmap.h - Added pin mappings for OCTOSPI GPIOs.
Impact
This change will not impact any architectures outside of the STM32H5 series. Even for the STM32H5 series, these changes will only have an impact if they are utilized.
Testing
No testing yet for these files other than ensuring that we can still build Nuttx. Further testing will be documented in a future pull request when the STM32H5 QSPI driver is added.
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
test code hello_main
int main(int argc, FAR char *argv[])
{
uint32_t *p = 0xdeedbeff;
*p = 0xffffff;
printf("%p\n %x\n", p, *p);
return 0;
}
qemu mps3-an547 hello_main :
Triggering an exception, and gdb backtrace is:
before:
(gdb) bt
/#0 0x0001168a in systick_getstatus (lower_=0x100010c <g_systick_lower>, status=0x1000a30 <g_intstackalloc+1600>)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_systick.c:142
/#1 0x000122f4 in current_usec () at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:105
/#2 0x0001234c in udelay_accurate (microseconds=250000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:115
/#3 0x000124bc in up_udelay (microseconds=250000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:463
/#4 0x0001249e in up_mdelay (milliseconds=250) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:446
/#5 0x0000920c in reset_board () at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:830
/#6 0x0000937c in _assert (filename=0x393f8 "/arch/arm/src/armv8-m/arm_busfault.c", linenum=113, msg=0x393f0 "panic", regs=0x1008500)
at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:940
/#7 0x00000e2c in arm_busfault (irq=3, context=0x1008500, arg=0x0 <up_ndelay>) at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_busfault.c:113
/#8 0x000012d2 in arm_hardfault (irq=3, context=0x1008500, arg=0x0 <up_ndelay>)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_hardfault.c:142
/#9 0x00008b20 in irq_dispatch (irq=3, context=0x1008500) at /home/ajh/work/vela_system/nuttx/sched/irq/irq_dispatch.c:145
/#10 0x0000041a in arm_doirq (irq=3, regs=0x1008500) at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_doirq.c:103
/#11 0x0000034e in exception_common () at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_exception.S:224
after:
(gdb) bt
/#0 systick_is_running () at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_systick.c:106
/#1 0x000125c0 in systick_getstatus (lower_=0x1000114 <g_systick_lower>, status=0x1007a20)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_systick.c:141
/#2 0x0001323c in current_usec () at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:105
/#3 0x00013294 in udelay_accurate (microseconds=250000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:115
/#4 0x00013404 in up_udelay (microseconds=250000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:463
/#5 0x000133e6 in up_mdelay (milliseconds=250) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_timer.c:446
/#6 0x00008c5c in reset_board () at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:816
/#7 0x00008e88 in _assert (filename=0x39408 "/arch/arm/src/armv8-m/arm_busfault.c", linenum=113, msg=0x39400 "panic", regs=0x1007cf0)
at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:915
/#8 0x00000ce4 in arm_busfault (irq=3, context=0x1007cf0, arg=0x0 <up_ndelay>)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_busfault.c:113
/#9 0x0000118a in arm_hardfault (irq=3, context=0x1007cf0, arg=0x0 <up_ndelay>)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_hardfault.c:142
/#10 0x000086cc in irq_dispatch (irq=3, context=0x1007cf0) at /home/ajh/work/vela_system/nuttx/sched/irq/irq_dispatch.c:145
/#11 0x0000041e in arm_doirq (irq=3, regs=0x1007cf0) at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_doirq.c:99
/#12 0x00000360 in exception_common () at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv8-m/arm_exception.S:230
/#13 0x00027a8c in hello_main (argc=1, argv=0x1006e20) at /home/ajh/work/vela_system/apps/examples/hello/hello_main.c:39
/#14 0x00014968 in nxtask_startup (entrypt=0x27a7d <hello_main>, argc=1, argv=0x1006e20)
at /home/ajh/work/vela_system/nuttx/libs/libc/sched/task_startup.c:72
/#15 0x0000f450 in nxtask_start () at /home/ajh/work/vela_system/nuttx/sched/task/task_start.c:116
/#16 0x00000000 in ?? ()
(gdb)
qemu armv7a nsh, hello_main:
before:
(gdb) bt
/#0 udelay_coarse (microseconds=156000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:67
/#1 up_ndelay (nanoseconds=nanoseconds@entry=250000000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:431
/#2 0x0060c630 in up_udelay (microseconds=microseconds@entry=250000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:416
/#3 0x0060c644 in up_mdelay (milliseconds=milliseconds@entry=250) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:401
/#4 0x006056bc in reset_board () at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:816
/#5 _assert (filename=filename@entry=0x63047f "/arch/arm/src/armv7-a/arm_dataabort.c", linenum=linenum@entry=157, msg=msg@entry=0x62f56d "panic",
regs=<optimized out>, regs@entry=0x4020af10) at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:915
/#6 0x0060bd74 in arm_dataabort (regs=0x4020af10, dfar=<optimized out>, dfsr=<optimized out>)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv7-a/arm_dataabort.c:157
/#7 0x0060bc04 in arm_vectordata () at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv7-a/arm_vectors.S:438
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
(gdb)
after:
(gdb) bt
/#0 udelay_coarse (microseconds=192000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:67
/#1 up_ndelay (nanoseconds=nanoseconds@entry=250000000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:431
/#2 0x0060c650 in up_udelay (microseconds=microseconds@entry=250000) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:416
/#3 0x0060c664 in up_mdelay (milliseconds=milliseconds@entry=250) at /home/ajh/work/vela_system/nuttx/drivers/timers/arch_alarm.c:401
/#4 0x006056bc in reset_board () at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:816
/#5 _assert (filename=filename@entry=0x63047f "/arch/arm/src/armv7-a/arm_dataabort.c", linenum=linenum@entry=157, msg=msg@entry=0x62f56d "panic",
regs=<optimized out>, regs@entry=0x4020af10) at /home/ajh/work/vela_system/nuttx/sched/misc/assert.c:915
/#6 0x0060bd94 in arm_dataabort (regs=0x4020af10, dfar=<optimized out>, dfsr=<optimized out>)
at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv7-a/arm_dataabort.c:157
/#7 0x0060bc08 in arm_vectordata () at /home/ajh/work/vela_system/nuttx/arch/arm/src/armv7-a/arm_vectors.S:453
/#8 0x00620cd4 in hello_main (argc=4999, argv=0x0) at /home/ajh/work/vela_system/apps/examples/hello/hello_main.c:41
/#9 0x0060d320 in nxtask_startup (entrypt=0x620cc4 <hello_main>, argc=1, argv=0x4020a088)
at /home/ajh/work/vela_system/nuttx/libs/libc/sched/task_startup.c:72
/#10 0x00609b50 in nxtask_start () at /home/ajh/work/vela_system/nuttx/sched/task/task_start.c:116
/#11 0x00000000 in ?? ()
qemu risc-v nsh
before:
(gdb) bt
/#0 udelay_coarse (microseconds=228000, microseconds@entry=891896832) at timers/arch_alarm.c:67
/#1 up_ndelay (nanoseconds=nanoseconds@entry=250000000) at timers/arch_alarm.c:431
/#2 0x8000397e in up_udelay (microseconds=microseconds@entry=250000) at timers/arch_alarm.c:416
/#3 0x80003988 in up_mdelay (milliseconds=milliseconds@entry=250) at timers/arch_alarm.c:401
/#4 0x80011f1c in reset_board () at misc/assert.c:813
/#5 0x80011f7a in _assert (filename=filename@entry=0x0, linenum=linenum@entry=0, msg=msg@entry=0x8002114c "panic", regs=<optimized out>,
regs@entry=0x80030704) at misc/assert.c:915
/#6 0x80006ad6 in riscv_exception (mcause=<optimized out>, regs=0x80030704, args=<optimized out>) at common/riscv_exception.c:129
/#7 0x80000d9e in riscv_doirq (irq=7, regs=<optimized out>) at common/riscv_doirq.c:99
/#8 0x80000164 in exception_common () at common/riscv_exception_common.S:210
Backtrace stopped: frame did not save the PC
(gdb)
after
(gdb) bt
/#0 0x80003922 in udelay_coarse (microseconds=90000, microseconds@entry=891896832) at timers/arch_alarm.c:67
/#1 up_ndelay (nanoseconds=nanoseconds@entry=250000000) at timers/arch_alarm.c:431
/#2 0x8000397e in up_udelay (microseconds=microseconds@entry=250000) at timers/arch_alarm.c:416
/#3 0x80003988 in up_mdelay (milliseconds=milliseconds@entry=250) at timers/arch_alarm.c:401
/#4 0x80011f2a in reset_board () at misc/assert.c:816
/#5 0x80011f7a in _assert (filename=filename@entry=0x0, linenum=linenum@entry=0, msg=msg@entry=0x8002114c "panic", regs=<optimized out>,
regs@entry=0x80030704) at misc/assert.c:915
/#6 0x80006ad6 in riscv_exception (mcause=<optimized out>, regs=0x80030704, args=<optimized out>) at common/riscv_exception.c:129
/#7 0x80000d9e in riscv_doirq (irq=7, regs=<optimized out>) at common/riscv_doirq.c:99
/#8 0x80000166 in exception_common () at common/riscv_exception_common.S:215
/#9 0x8001792a in hello_main (argc=<optimized out>, argv=<optimized out>) at hello_main.c:41
/#10 0x80004b52 in nxtask_startup (entrypt=0x80030704, argc=1, argv=0x800300e8) at sched/task_startup.c:72
/#11 0x80001e72 in nxtask_start () at task/task_start.c:116
/#12 0x00000000 in ?? ()
Backtrace stopped: frame did not save the PC
(gdb)
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
continue work of a68b00206b
| commit a68b00206b
| Author: hujun5 <hujun5@xiaomi.com>
| Date: Mon Dec 9 20:48:09 2024 +0800
|
| cxd56_rtc.c: use small lock in arch/arm/src/cxd56xx/cxd56_rtc.c
|
| reason:
| We hope to remove all instances of spin_lock_irqsave(NULL).
|
| Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: chao an <anchao@lixiang.com>
Used STM32H7 spi driver as a base. The register set is nearly identical. All registers are named the same with the same offset. There are some bits within the registers that are different but are not referenced in stm32_spi.c. Therfore this driver may just work as is. I did modify the clock source selection for each SPI peripheral, but not much else. Differences in the registers were applied in hardware/stm32h5xxx_spi.h.
Added functionality to SPI to configure the SPI RCC clock.
Added SPI info to Kconfig, updated stm32_spi.c to select and set the RCC clock, and other minor updates.
Updated Pin Map for SPI, added CFG1_BPASS support
Fixed redefinition of GPIO_SPI6_SCK_2
Added SPI_MAX_KER_CK definition.
This definition was needed because the H50 chips allow a kernel clock of 250 MHz. However the datasheets for all other chips (H52, H53, H56, H57) have a max of 125 MHz.
Changed SPI Clock Source Configuration
Moved setting of SPIx clock sources to stm32h5xx_rcc.c. STM32_SPIx_FREQUENCY and STM32_RCC_CCIPR3_SPIxSEL are now defined in board.h. Added error checking in stm32_spi.c to make sure STM32_SPIx_FREQUENCY and STM32_RCC_CCIPR3_SPIxSEL are actually defined.
Style updates
Removed SPI Clock selection from Kconfig
Update arch/arm/src/stm32h5/stm32_spi.h
Co-authored-by: hartmannathan <59230071+hartmannathan@users.noreply.github.com>
Update arch/arm/src/stm32h5/Kconfig
Co-authored-by: hartmannathan <59230071+hartmannathan@users.noreply.github.com>
Update arch/arm/src/stm32h5/stm32_spi.h
Co-authored-by: hartmannathan <59230071+hartmannathan@users.noreply.github.com>
