Macro definitions such as _S in public header files can cause compilation problems under the MSVC compiler.
Move macro definitions that are not used in public locations to the corresponding files
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
1. extract dump from assert main flow
2. use OSINIT_PANIC for fatal error.
3. fix the method to judge kernel thread.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
1.add pin type to cfg gpio as wake up source
2.add IOEXPANDER_OPTION_WAKEUPCFG for set wake up option
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
The feature depends on ARCH_USE_SEPARATED_SECTION
the different memory area has different access speed and cache
capability, so the arch can custom allocate them based on
section names to achieve performance optimization
test:
sim:elf
sim:sotest
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
reason:
Currently, if we need to schedule a task to another CPU, we have to completely halt the other CPU,
manipulate the scheduling linked list, and then resume the operation of that CPU. This process is both time-consuming and unnecessary.
During this process, both the current CPU and the target CPU are inevitably subjected to busyloop.
The improved strategy is to simply send a cross-core interrupt to the target CPU.
The current CPU continues to run while the target CPU responds to the interrupt, eliminating the certainty of a busyloop occurring.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
when a context switch occurs, up_switch_context is executed.
In order to reduce the time taken for context switching,
we inline the up_switch_context function.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
When monitoring multiple capture channels, the `ioctl` function
is called three times, leading to significant overhead mainly due
to VFS and `nxmutex_lock/unlock`. Adding a new interface can save
the overhead of two `ioctl` calls.
Signed-off-by: yangguangcai <yangguangcai@xiaomi.com>
CXX: libcxxmini/libxx_new.cxx "/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/armv7-m/irq.h", line 594: error #3422:
use of the "register" storage class specifier is not allowed
register uint32_t sp;
^
"/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/armv7-m/irq.h", line 594: error #3422:
use of the "register" storage class specifier is not allowed
register uint32_t sp;
^
"/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/armv7-m/irq.h", line 594: error #3422:
use of the "register" storage class specifier is not allowed
register uint32_t sp;
^
make[1]: *** [Makefile:69: libxx_delete_sized.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile:69: libxx_deletea_sized.o] Error 1
make[1]: *** [Makefile:69: libxx_new.o] Error 1
"/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/armv7-m/irq.h", line 594: error #3422:
use of the "register" storage class specifier is not allowed
register uint32_t sp;
^
"/home/guoshichao/work_profile/vela_os/vela_qemu_1/nuttx/include/arch/armv7-m/irq.h", line 594: error #3422:
use of the "register" storage class specifier is not allowed
register uint32_t sp;
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
"/home/guoshichao/work_profile/vela_os/vela_car_5/nuttx/include/nuttx/crypto/blake2s.h", line 91: error #2118-D:
this attribute reduces the alignment of the typedef, and while that
will be respected for struct/field layout, the compiler will not
generate code to handle misaligned accesses for objects of this type
typedef uint32_t uint32_alias_t __attribute__((may_alias)) aligned_data(1);
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Master can send restart command to slave to reboot the slave core
Signed-off-by: mazhuang <mazhuang@xiaomi.com>
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Because locate the command at the end the resource table is unfriendly
when we want to support multi virtio devices instead only one virtio
rpmsg device.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add more common command for rptun and rpmsg_virtio frameworks,
also modify the rptun and rpmsg_virtio driver to use the common
commands.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Move the panic logic in common places, later we can move more logic to
the framework instead of having the drivers implement it repeatedly.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
rptun secure is a rptun driver used for the rpmsg communication
between (Non-Secure) REE and (Secure) TEE environments.
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Change syslog API naming more reasonable:
1. rename syslog_channel() to syslog_channel_register()
2. rename syslog_channel_remove() to syslog_channel_unregister()
Signed-off-by: chao an <anchao@lixiang.com>
and move common math funtions to math32.h:
div_round_up
div_round_closest
is_power_of_2
roundup_pow_of_two
rounddown_pow_of_two
Signed-off-by: lipengfei28 <lipengfei28@xiaomi.com>
Summary:
1.Modified the i_crefs from int16_t to atomic_int
2.Modified the i_crefs add, delete, read, and initialize interfaces to atomic operations
The purpose of this change is to avoid deadlock in cross-core scenarios, where A Core blocks B Core’s request for a write operation to A Core when A Core requests a read operation to B Core.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
This commit added ifdef macro to sigwork_s. When CONFIG_SIG_EVTHREAD is
not defined, the struct sigwork_s will be empty struct, which is helpful
to reduce bss size.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
the detailed warning info are:
CC: syslog/vsyslog.c "pthread/pthread_create.c", line 443: warning #1931-D: operand of sizeof is
not a type, variable, or dereferenced pointer expression
ptcb->cmn.timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
CC: dirent/lib_closedir.c "sched/sched_profil.c", line 81: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
wd_start(&prof->timer, PROFTICK, profil_timer_handler, arg);
^
"sched/sched_profil.c", line 142: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
wd_start(&prof->timer, PROFTICK, profil_timer_handler, (wdparm_t)prof);
^
CC: common/arm_modifyreg8.c "sched/sched_setscheduler.c", line 165: warning #1931-D: operand of sizeof is
not a type, variable, or dereferenced pointer expression
tcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
CC: misc/lib_utsname.c "sched/sched_unlock.c", line 275: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
rtcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
"sched/sched_roundrobin.c", line 119: warning #1931-D: operand of sizeof is
not a type, variable, or dereferenced pointer expression
tcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
CC: armv7-m/arm_fpuconfig.c cxarm: Error: No files. Try -help.
CC: misc/lib_crc8ccitt.c cxarm: Error: No files. Try -help.
cxarm: Error: No files. Try -help.
CC: getprime_main.c cxarm: Error: No files. Try -help.
cxarm: Error: No files. Try -help.
CC: misc/lib_log2ceil.c cxarm: Error: No files. Try -help.
CC: task/task_start.c "task/task_setup.c", line 423: warning #1931-D: operand of sizeof is not a
type, variable, or dereferenced pointer expression
tcb->timeslice = MSEC2TICK(CONFIG_RR_INTERVAL);
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Supports the flush operation of the sensor.
The application can initiate a flush action through ioctl SNIOC_FLUSH
to trigger flush, and the call will be returned immediately.
Using SNIOC_GET_EVENTS to clear flush event,
However, the flush implementation is asynchronous, when all the flush
data is push to upper circbuffer, the POLLPRI event(FLUSH_COMPLETED)
will be reported.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
When there is an actual physical sensor, the driver must implement the get info interface. The upper layer can obtain the actual physical sensor information through SNIOC_GET_INFO.
SNIOC_SET_INFO can only set the information of the local virtual sensor, which means it is bound to the local advertisement. Remote subscribers cannot set the information.
Usage:
struct sensor_device_info dev_info;
orb_ioctl(fd, SNIOC_GET_INFO, (unsigned long)(uintptr_t)&dev_info);
or:
ret = orb_set_info(fd, &dev_info);
ret = orb_get_info(fd, &dev_info);
Signed-off-by: likun17 <likun17@xiaomi.com>
"~/nuttx/include/nuttx/sched.h", line 631: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD >= 0
^
"~/nuttx/include/nuttx/sched.h", line 637: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 642: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 789: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 793: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 631: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_THREAD >= 0
^
"~/nuttx/include/nuttx/sched.h", line 637: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 642: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 789: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_PREEMPTION >= 0
^
"~/nuttx/include/nuttx/sched.h", line 793: warning #193-D:
zero used for undefined preprocessing identifier
"CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION"
#if CONFIG_SCHED_CRITMONITOR_MAXTIME_CSECTION >= 0
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
There will be a large performance loss after SCHED_CRITMONITOR is enabled.
By isolating thread running time-related functions, CPU load can be run with less overhead.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Compilation error:
Kasan/book. c: In the function '__hwasanloaded 16_noabort':
Kasan/book. c: 76:5: Warning: 'builtin-turn_dedress' contains only 2 bytes of address
kasan_check_report(addr, size, false, return_address(0)); \
^
Kasan/book. c: 423:1: Note: in expansion of macro 'DEFINE-HWASAN_LOAD-STORE'
DEFINE_HWASAN_LOAD_STORE(16)
^
Kasan/book. c: In the function '__hwasan_store16_noabort':
Kasan/book. c: 80:5: Warning: 'builtin-turn_dedress' contains only 2 bytes of address
kasan_check_report(addr, size, true, return_address(0)); \
^
Kasan/book. c: 423:1: Note: in expansion of macro 'DEFINE-HWASAN_LOAD-STORE'
DEFINE_HWASAN_LOAD_STORE(16)
^
CC: hello. min c hello. min c: In the function 'hello. min':
Hello. main. c: 39:3: Warning: 'builtin-turn_dedress' contains only 2 bytes of address
printf("Hello, World: %p!!\n", return_address(0));
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
1. Use always_inline_function instead of inline, inline does not take effect
2. Activate Kasan acceleration by 1/7
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
Summary:
1.Added msync callback in struct mm_map_entry_s
2.Added msync API in fs_msync.c
3.Added static msync_rammap for rammap.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
detail: Add g_ prefix to can_dlc_to_len and len_to_can_dlc to
follow NuttX coding style conventions for global symbols,
improving code readability and maintainability.
Signed-off-by: zhaohaiyang1 <zhaohaiyang1@xiaomi.com>
This patch added support for SIGEV_THREAD_ID and sigev_notify_thread_id.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Return 1 to indicate the work was not cancelled.
Because it is currently being processed by work thread,
but wait for it to finish.
Signed-off-by: ligd <liguiding1@xiaomi.com>
The new API is defined by GNU and implemented in other LibCs, such as
Musl.
This also modifies API of obstack_blank_fast and obstack_1grow_fast.
These are defined as returning void and thus return value here is
incompatibility with other implementations.
Rpmsg Port Uart is a new rpmsg transport layer.
Just like the rpmsg port spi, the difference is that the physical
communication method changed from SPI to UART.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Add get_local_cpuname to the rpmsg framework ops to support communicate
with the same remote core with multi rpmsg transport.
Some rpmsg services will send local cpu name to remote core and then let
remote core to connect local core by using this cpu name, when there are
multi rpmsg channels with same remote core, the remote core may connect
to incorrect core, so use the error rpmsg channel.
For example, there are two rpmsg channels between ap and audio:
ap core audio core
[ap1] <-- rpmsg virtio1 --> [audio1]
[ap2] <-- rpmsg virtio2 --> [audio2]
When we want to use the rpmsg virtio1 to communicate, ap core may send
local cpuname "ap2" to audio, so the audio core use remote cpu "ap2" to
connect with ap, and resulting in the use of incorrect rpmsg channel.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Rpmsg Router is new rpmsg transport layer, it can router the rpmsg
messages to a cpu that not directly connected with local cpu by Rpmsg,
For the rpmsg services, it is as if there is a real Rpmsg Channel between
the local cpu and the remote cpu.
For examples, there are three cpus: ap, cp and audio.
ap and cp, ap and audio has share memory and be connected by Rpmsg VirtIO,
so ap and cp, ap and audio can communicate with each other by Rpmsg, but
cp can not communicate with audio direclty.
[cp] <-- rpmsg virtio --> [ap] <-- rpmsg virtio --> [audio]
With rpmsg router, the cp can communicate with audip by Rpmsg dereclty because
the router in ap will forward the rpmsg message from cp/audio to audio/cp, like
this:
+<----- rpmsg router --> hub <-- rpmsg router ------>+
| | |
[cp] <-- rpmsg virtio --> [ap] <-- rpmsg virtio --> [audio]
Signed-off-by: yintao <yintao@xiaomi.com>
Add Rpmsg-Port-SPI transport layer.
Rpmsg Port SPI is a new rpmsg transport layer based on the Rpmsg Port,
it provides the capability for two SPI-connected (and two extra GPIO)
chips to communicate with each other using Rpmsg.
All already implemented Rpmsg Services can be used with this new transport
layer without any modifications.
Signed-off-by: liaoao <liaoao@xiaomi.com>
Rpmsg Physical Transport Layer is a new rpmsg transport, it's a
common part for the physical communication based rpmsg transport
layers such as Rpmsg-SPI and Rpmsg-Uart.
It implements three common parts:
1. Implement the NuttX and OpenAMP rpmsg frameworks' ops and the
rpmsg name service;
2. The buffer management and provide some APIs to lower layer to use;
Signed-off-by: liaoao <liaoao@xiaomi.com>
This interface may be used by application specific logic to start
specified slave cpu core under the pseudo AMP case which is different
with armv7-a/armv8-a SMP. Support for this function is required by
board-level logic if CONFIG_BOARDCTL_START_CPU is selected.
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
add support for UART 16550 compatible PCI device.
For now we support qemu serial PCI devices and AX99100 based cards.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
prepare 16550 UART driver to support PCI:
- [breaking change] change argument of uart_ioctl() from `struct file *filep` to `FAR struct u16550_s *priv`
Also fix moxart_16550.c build related to this change
- [breaking change] change argument of uart_getreg() and uart_putreg from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
Also fix arch/x86/src/qemu/qemu_serial.c and arch/x86_64/src/intel64/intel64_serial.c related to this change
- [breaking change] change argument of uart_dmachan() from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
- move `struct u16550_s` to public header
- generalize UART_XXX_OFFSET so we can use it with any register increment
- make u16550_bind(), u16550_interrupt(), u16550_interrupt() public
- remove arch/or1k/src/common/or1k_uart.c and use common 16550 MIMO interfacve
- change irq type in `struct u16550_s` from uint8_t to int to match MSI API
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
1. only support pci modern device;
2. need the pci controller support MSI/MSI-X;
It has been verified based on virtio-rng and virtio-net.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
rpmsg_virtio_ivshmem is a ivshmem based rpmsg virtio driver,
with this driver, we can use the rpmsg virtio in qemu platfrom
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Rpmsg VirtIO is a virtio transport implementation for Rpmsg, and
it's different to the rptun framework.
rpmsg_virtio.c implements the rpmsg virtio transport layer by itself
to avoid use the remoteproc implementation in OpenAMP to save code
size, so it can be treated as a lightweight version of rptun.
Therefore, rpmsg_virtio.c only support the communication feature and
do not support contoll the life cycle of the remote core.
But benefit by it's small footprint, it can be used in the chips with
small flash.
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Some devices need to clear the fb panbuf when waking up from sleep
to avoid outputting residual buffers from before sleeping
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
IOB buffer participates in the calculation of the congestion strategy
in the protocol stack, if the iob buffer is exhausted or there are
too many syslog printing tasks, the behavior of the protocol stack
and log printing will unable to determined, this PR will remove support
for iob buffer in syslog
Signed-off-by: chao an <anchao@lixiang.com>
According to the mmap(2) specification, anonymous pages should be initialized to zero unless the MAP_UNINITIALIZED is specified.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
This commit add MADV_HUGEPAGE and MADV_NOHUGEPAGE definitions for madvise. Notice that none of these flags have been implemented yet.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
coresight_claim_device will fail when unregister device
which has been enabled. device should be the init state when
it is unregistered.
Signed-off-by: liaoao <liaoao@xiaomi.com>
64-by-32-bit divisions are prominent in the NuttX, even on 32-bit
machines. Luckily, many of them use a constant divisor that allows
for a much faster multiplication by the divisor's reciprocal.
The compiler already performs this optimization when compiling a 32-by-32
division with a constant divisor. Unfortunately, on 32-bit machines, gcc
does not optimize 64-by-32 divisions in that case, except for constant
divisors that happen to be a power of 2.
Let's avoid the slow path whenever the divisor is constant by manually
computing the reciprocal ourselves and performing the multiplication
inline. In most cases, this improves performance of 64-by-32 divisions
by about two orders of magnitude compared to the __div64_32() fallback,
especially on architectures lacking a native div instruction.
Signed-off-by: ligd <liguiding1@xiaomi.com>
CID 1266677: (#2 of 2): Use 32-bit time_t (Y2K38_SAFETY)
1. declaration_with_small_time_t: Declare use of time_t, which is defined as 32 bits wide on this platform, while the minimum safe width is 64.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Using the ts/tick conversion functions provided in clock.h
Do this caused we want speed up the time calculation, so change:
clock_time2ticks, clock_ticks2time, clock_timespec_add,
clock_timespec_compare, clock_timespec_subtract... to MACRO
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit refactors the wdog module to use absolute time representation internally. The main improvements include:
1. Fixed recursive watchdog handling caused by calling wd_start within watchdog timeout callback function.
2. Simplified timer processing to improve performance and enhance code readability.
3. Improved accuracy of timers.
4. Reduced critical section and interrupt disable time, improving real-time performance.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
reason:
In SMP, when a context switch occurs, restore_critical_section is executed.
To reduce the time taken for context switching, we directly pass the required
parameters to restore_critical_section instead of acquiring them repeatedly.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
In the SMP, when a context switch occurs, restore_critical_section is executed.
In order to reduce the time taken for context switching,
we inline the restore_critical_section function.
Given that restore_critical_section is small in size
and is called from only one location, inlining it does not increase the size of the image.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add new driver frameworks: force feedback for vibrator, like linux,
unify vendor vibrator driver using.
Incorporating a force feedback-based driving framework to replace the
conventional driver/motor setup for controlling vibrators not only
enhances the precision and responsiveness of the haptic feedback but
also aligns better with the advancements in Linux-based driver systems.
refs docs link: https://www.kernel.org/doc/html/v4.19/input/ff.html
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Add common ivshmem driver, provide the ivshmem bus mechisam, so
many ivshmem based driver can change to pci_ivshmem based
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Rptun is a rptun fremework driver base on the Inter-Virtual Machine
Share Memory Device.
With this driver, two NuttX runs in different QEMU can communicate
with each other by the rpmsg api.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
We can see them in ifconfig:
ap> ifconfig
wlan0 Link encap:Ethernet HWaddr 42:64:7f:b3:12:03 at UP mtu 1500
inet addr:10.0.1.2 DRaddr:10.0.1.1 Mask:255.255.255.0
inet6 DRaddr: ::
RX: Received Fragment Errors Bytes
00000b9b 00000000 00000000 21daf5
IPv4 IPv6 ARP Dropped
00000a33 00000137 00000031 00000000
TX: Queued Sent Errors Timeouts Bytes
00000ac4 00000ac4 00000000 00000000 1a2103
Total Errors: 00000000
Signed-off-by: meijian <meijian@xiaomi.com>
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
reason:
1 We place interrupt handling functions of the same priority into the work queue corresponding
to that priority, allowing high-priority interrupts to preempt low-priority ones,
thus ensuring the real-time performance of high-priority interrupts.
2 The sole purpose of the interrupt handler is to wake
up the work queue of the corresponding priority and execute the interrupt handling function.
3 Compared to the functionality of isr threads, this
approach saves more memory, particularly when the number of interrupts is large.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
BOARDIOC_SPINLOCK can support the combined semantics
of disabling interrupts (irq), trylock, and spinlock.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Change the qmeu pci test code for new pci driver framework
Signed-off-by: yangshuyong <yangshuyong@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Signed-off-by: lipengfei28 <lipengfei28@xiaomi.com>
Since pthread_mutex is implemented by sem, it is impossible to see in ps who holds the lock and causes the wait.
Replace sem with mutex implementation to solve the above problems
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
reason:
spin_initialize is often used to release a lock,
and if we don't include a memory barrier,
it may lead to the lock being released prematurely.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
reason:
These interfaces are used when we assign interrupt
handling of the same priority to the corresponding priority work queues.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add TUNSETCARRIER ioctl, then we may change the carrier state of TUN dynamically. Note that we don't need an ioctl for getting carrier, it can be done by SIOCGIFFLAGS already.
Ref: https://github.com/torvalds/linux/blob/v6.10/drivers/net/tun.c#L3374-L3380
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
CC: serial/serial_io.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/power/regulator.h", line 227: warning #231-D:
declaration is not visible outside of function
int regulator_gpio_init(FAR struct ioexpander_dev_s *iodev,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
This is a memory monitoring interface implemented with reference to Linux's PSI (Pressure Stall Information),
which can send notifications when the system's remaining memory is below the threshold.
The following example code sets two different thresholds.
When the system memory is below 10MB, a notification is triggered.
When the system memory is below 20 MB, a notification (POLLPRI event) is triggered every 1s.
```
int main(int argc, FAR char *argv[])
{
struct pollfd fds[2];
int ret;
if (argc == 2)
{
char *ptr = malloc(1024*1024*atoi(argv[1]));
printf("Allocating %d MB\n", atoi(argv[1]));
ptr[0] = 0;
return 0;
}
fds[0].fd = open("/proc/pressure/memory", O_RDWR);
fds[1].fd = open("/proc/pressure/memory", O_RDWR);
fds[0].events = POLLPRI;
fds[1].events = POLLPRI;
dprintf(fds[0].fd, "%llu -1", 1024LLU*1024 * 10);
dprintf(fds[1].fd, "%llu 1000000", 1024LLU*1024 * 20);
while (1)
{
ret = poll(fds, 2, -1);
if (ret > 0)
{
printf("Memory pressure: POLLPRI, %d\n", ret);
}
}
return 0;
}
```
https://docs.kernel.org/accounting/psi.html
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
"/home/guoshichao/work_profile/vela_os/vela_car_4/nuttx/include/nuttx/net/netdev.h", line 493: warning #231-D:
declaration is not visible outside of function
FAR struct netdev_ifaddr6_s *addr,
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1.Add sign to indicate negative and positive
2.Fix case where there are negative numbers in the operation
3.expand to 512 bytes to support rsa2048
Signed-off-by: makejian <makejian@xiaomi.com>
(1) RSA_PKCS15_VERIFY Misspell
(2) if iv not provided during decryption, iv should get from data.
It was not discovered before because all symmetric decryption comes with iv.
Signed-off-by: makejian <makejian@xiaomi.com>
Some macro definitions have already been defined in other header files, redundant macro definitions have been removed in include/nuttx/can.h. Align some code. Remove no use struct (can_response_s) and some variables.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Summary:
Indicate whether the file is currently locked by adding a new field locked to filep.
0 - Unlocked
1 - Locked
The status of the filep at close is used to determine whether to continue with the following procedure.
Optimizing performance:
Before
Time taken to close the file: 33984 nsec
After
Time taken to close the file: 23744 nsec
Improvement of about 10 msec
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
Because stdio.h references stdatomic.h in MVSC, it internally declares mbstate_t, leading to redeclarations during compilation.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
This change mainly appears in the compilation environment of MVSC
Since MVSC supports the c++11 standard in VS2019 preview3 (https://en.cppreference.com/w/cpp/compiler_support/11), we can do static initialization using the c++11 approach
atomic_int a = 1
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. use nuttx/atomic.h instead of stdatomic
2. remove CONFIG_HAVE_ATOMIC,because we now support atomic on all platforms
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modify the conditions for entering different include header files
2.Added pre-definition for _Atomic _Bool when it is missing
3.Added nuttx for stdatomic implementation. When toolchain does not support atomic, use lib/stdatomic to implement it
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. Add nuttx/atomic.h in include
2. Use nuttx/atomic.h instead of stdatomic.h in the nuttx directory
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
remove alist, switch to a convenient way to traverse
the physical address directly.
At the same time, we can use `gurad` to mark whether
it is free or alloc or out of bounds check
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
pm process should be done by chip specific, but we can provide a standard
flow, then vendor & chip can only focus on handle different state change.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
when the vsync comes, fb drivers should call fb_vsync_pollnotify to notify POLLPRI, so that users can catch the synchronization time of vsync and do something.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Summary:
1.Remove the macro definition of getnproc in sysinfo
2.New get_nprocs_conf and get_nprocs interfaces, return CONFIG_SMP_NCPUS, return 1 when not defined
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
optimize the interaction flow associated with network drivers to reduce
the amount of code and improve compatibility
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This is a tool for associating discrete IDs with addresses.
This tool is implemented through the red-black tree method provided by <sys/tree.h>, and the time complexity when calling, searching, and deleting is optimized to O(logn)
The implementation is the moving node operation of two red-black trees
1. When applying for a node, it will first check whether there is an available node in the "removed" tree. If so, the memory address of the node will be reused and moved to the "alloced" tree.
2. If the "removed" tree is an "empty tree", then the node will be requested from the memory and added to the "alloced" tree
3. Similarly, when removing a node, we set the address pointed to in the node to "NULL" and move it to the "removed" tree. Next time we alloc the node, we can reduce the overhead caused by memory application
For now, we still have something that can be optimized, and that is the memory elimination mechanism of the "removed tree". The current implementation will only release all the content under the "removed" tree when the idtree is destroyed.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
According to the eMMC specification, in Backwards Compatibility
with legacy MMC card mode, the frequency of the SD clock must be
0-26 MHZ; in high speed SDR mode, it must be 0-52MHZ. So we should
switch to high speed SDR mode if the clock frequency is higher than
26MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
solve the compiling problem of the third-party library,
add IN6_IS_ADDR_MC_LINKLOCAL and IN6_IS_ADDR_SITELOCAL definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
"libcxxmini/libxx_cxa_guard.cxx", line 47: error #77-D: this declaration has
no storage class or type specifier
__extension__ typedef int __guard __attribute__((mode(__DI__)));
^
"libcxxmini/libxx_cxa_guard.cxx", line 47: error #65: expected a ";"
__extension__ typedef int __guard __attribute__((mode(__DI__)));
^
"libcxxmini/libxx_cxa_guard.cxx", line 64: error #20: identifier "__guard" is
undefined
int __cxa_guard_acquire(FAR __guard *g)
^
"libcxxmini/libxx_cxa_guard.cxx", line 64: error #20: identifier "g" is
undefined
int __cxa_guard_acquire(FAR __guard *g)
^
"libcxxmini/libxx_cxa_guard.cxx", line 65: error #65: expected a ";"
{
^
"libcxxmini/libxx_cxa_guard.cxx", line 93: warning #12-D: parsing restarts
here after previous syntax error
}
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
CC: src/algslib_sha256.c "comlin.c", line 189: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame lin_err_frame = comlin_rx_frame[chlId];
^
"comlin.c", line 282: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame frame;
^
"comlin.c", line 321: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame frame;
"DiagServer_IsoTp.c", line 220: error #1982-D: target stack alignment is
insufficient to guarantee alignment of this variable
struct canfd_frame frame = {0};
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
the mempool_alloc and mempool_free function are duplicate with the
mempool method that provided in optee_os, in order to port optee_os, so
we rename the mempool related functions in nuttx
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
In order to better use the Android goldfish emulator,
a GPU FB driver has been added. This allows the goldfish
emulator side to achieve more flexible display effects,
such as UI skins.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
According to Virtual I/O Spec:
When using legacy interfaces, transitional drivers which have not negotiated VIRTIO_F_ANY_LAYOUT MUST use a single descriptor for the struct virtio_net_hdr on both transmit and receive, with the network data in the following descriptors.
https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-2280006 (Section 5.1.6.6)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
stdint.h is needed in uart_16550.h for some types, e.g. uint32_t,
uintptr_t. Otherwise there will be building issue unless that stdint.h
is added before uart_16550.h by all files which needs uart_16550.h.
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
warning C5101: use of preprocessor directive in function-like macro argument list is undefined behavior
Co-authored-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Co-authored-by: xuxin19 <xuxin19@xiaomi.com>
Refactoring path logic to prevent logic flaws, direntry size bug fix to allow proper direntry traversal, open free bug fix to prevent memory leak after close.
Signed-off-by: Saurav Pal <resyfer.dev@gmail.com>
This adds explicit `void mm_free_delaylist(heap)` interface so that
to force freeing the heap's delaylist.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
