1. CONFIG_ARCH_COVERAGE has been replaced by CONFIG_SCHED_GCOV
2. Delete the SIM-specific GCOV_ALL configuration and change it to a universal configuration for all architectures
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
After recent changes on nuttx-apps (not limited to, but related
to nuttx-apps#2738, for instance), the stack usage for the NSH
task increased, causing stack overflows under specific situations
(when running `ps` command, for instance). This commit increases
the init task stack size to avoid it. Please note that, even before
these changes, the stack usage of the NSH task was around 90% and,
then, increasing the stack size of it was recommended.
To make it easier to keep the linker scripts updated for both
MCUboot and "simple-boot", this commit merges them into a single
linker script with macros to enable/disable specific sections.
`riscv_internal.h` is a private chip level header file,
and it should not be included in the board files.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
LD: nuttx
nuttx.rel: in function `ff_dct32_float_sse2':
(.text+0x66f9e): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_32' defined in .bss.ff_cos_32 section in nuttx.rel
(.text+0x66fa7): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_32' defined in .bss.ff_cos_32 section in nuttx.rel
(.text+0x672a6): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_16' defined in .bss.ff_cos_16 section in nuttx.rel
(.text+0x672ae): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_16' defined in .bss.ff_cos_16 section in nuttx.rel
nuttx.rel: in function `ff_imdct_calc_sse':
(.text+0x67905): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_64' defined in .bss.ff_cos_64 section in nuttx.rel
(.text+0x67948): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_128' defined in .bss.ff_cos_128 section in nuttx.rel
(.text+0x67988): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_256' defined in .bss.ff_cos_256 section in nuttx.rel
(.text+0x679c8): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_512' defined in .bss.ff_cos_512 section in nuttx.rel
(.text+0x67a08): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_1024' defined in .bss.ff_cos_1024 section in nuttx.rel
(.text+0x67a48): relocation truncated to fit: R_X86_64_32S against symbol `ff_cos_2048' defined in .bss.ff_cos_2048 section in nuttx.rel
(.text+0x67a88): additional relocation overflows omitted from the output
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
Modify the starting position of the elf segment to 0x5000000
==2561587==Shadow memory range interleaves with an existing memory mapping. ASan cannot proceed correctly. ABORTING.
==2561587==ASan shadow was supposed to be located in the [0x1ffff000-0x3fffffff] range.
==2561587==Process memory map follows:
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Add support for memory partitioning for OTA updates.
This feature is targeted at the integration of ESP32 boards with RISC-V architecture in conjunction with MCUboot
Signed-off-by: davidiogos <davi.silva@agrosystem.com.br>
fix
CMake Error at boards/arm/stm32f7/nucleo-f746zg/src/CMakeLists.txt:76 (endif):
Flow control statements are not properly nested.
CMake Error at boards/arm/stm32f7/nucleo-f746zg/src/CMakeLists.txt:76 (endif):
Flow control statements are not properly nested.
-- Configuring incomplete, errors occurred!
nucleo-144 combines 3 different ST boards. This approach is inconsistent with
the support for the rest of the nucleo boards, where each board is in separate folders.
Also nucleo-144 is no longer reserved for STM32F7 chips but other families also use this format.
After this commit nucleo-144 is divided into 3 boards:
- nucleo-f746zg
- nucleo-f767zi
- nucleo-f722ze
* Nucleo-L432KC board was missing internal MCU DAC code.
* DAC is now available on PA4/A3 and /dev/dac0 when enabled.
* Updated info on ADC inputs (PA6/A5,PA7/A6) depending on configuration.
Signed-off-by: Tomasz 'CeDeROM' CEDRO <tomek@cedro.info>
that pr requires chip turn on CONFIG_DRIVERS_BLUETOOTH to use bluetooth,
but not all defconig enable this option, so let's map bt_driver_register
to bt_netdev_register in header file in this case, and revert the unnessary
change in the related chip and board folders.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Implement PIC loading in armv8-m qemu,
for example: load address-independent AP ELF in the bootloader,
and the text segment in AP ELF is XIP,
no need to apply for memory and modify it.
Two config:
bootloader abbreviation bl:
use romfs to load ap elf, use the boot command to parse and jump to ap
application abbreviation ap:
run os test
We need to compile ap first, then compile bl.
compile step:
./tools/configure.sh mps3-an547:ap
make -j20
mkdir -p pic
cp boot pic/.
genromfs -a 128 -f ../romfs.img -d pic
make distclean -j20
./tools/configure.sh mps3-an547:bl
make -j20
run qemu:
qemu-system-arm -M mps3-an547 -m 2G -nographic -kernel nuttx.bin \
-gdb tcp::1127 -device loader,file=../romfs.img,addr=0x60000000
nsh> boot /etc/boot
ap> ostest
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
The segment of the Xen PVH boot protocol was not specified during linking and was placed before .loader.text, causing the boot to fail
Signed-off-by: liwenxiang1 <liwenxiang1@xiaomi.com>
Summary:
1. The start location of FLASH reserves the extended bootloader
2. DTB data is reserved at the start location of RAM
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Signed-off-by: lipengfei28 <lipengfei28@xiaomi.com>
Added a flash driver for the STM32G4 series. The primary change here is
the addition of stm32g4xxx_flash.c. This file uses the STM32L4 flash
driver as a template. The primary difference is the accounting for dual
banks with different page sizes.
Fixed error while building b-g474e-dpow1/buckboost. It was possible (technically) to have page be used uninitialzied. Changing the if statement to default to using a flash_page_size == 2048 fixes this issue.
Avoid compilation errors due to insufficient flash in CI
Configuration/Tool: same70-xplained/mcuboot-loader,CONFIG_ARM_TOOLCHAIN_GNU_EABI
2024-10-14 16:17:34
arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.ramfunc' will not fit in region `flash'
arm-none-eabi-ld: region `flash' overflowed by 52 bytes
arm-none-eabi-ld: warning: /github/workspace/sources/nuttx/nuttx has a LOAD segment with RWX permissions
make[1]: *** [Makefile:212: nuttx] Error 1
make: *** [tools/Unix.mk:551: nuttx] Error 2
make: Target 'all' not remade because of errors.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
/usr/bin/ld: nuttx.rel: relocation R_X86_64_32S against `.rodata' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
the detailed warning info:
ccarm: Warning: Unknown option "-Wno-cpp" ignored. Did you mean "--nocpp"?
ccarm: Warning: Unknown option "-pipe" passed to linker
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
Follow the elf format, correct the memory region flag description:
Executable 0x1, Writable 0x2, Readable 0x4
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
tc32-elf-ld generated: In function `nrand_r':
/data/project/code/vela-pt/nuttx/libs/libc/stdlib/lib_srand.c:241: undefined reference to `__fixunsdfsi'
telink compiler do not support float point, so set LIBC_RAND_ORDER
to be 0 to avoid function srand() use float point.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
gprof can analyze code hot spots based on scheduled sampling.
After adding the "-pg" parameter when compiling, you can view the code call graph.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
The default bpp is STM32_LTDC_L1_L8, when TM32_FB_CMAP=y,and The default bpp is STM32_LTDC_L1_RGB565 when TM32_FB_CMAP=n. The color-format bpp of stm32f429i is 16, so we should be disable TM32_FB_CMAP, otherwise fb demo will result in an error.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
up_interrupt_context indicates that we self inside interrupt/handler mode,
replaced to private function is_nesting_interrupt to make less confused.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
The case want to determine if a interrupt with higher priority and the
interrupt preemption occurred, but up_interrupt_context indicates that we
self inside interrupt/handler mode. As we previously did not handle the
ramvector interrupt correctly, after update breaked the case. We should
use a more clear private function is_nesting_interrupt.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
during migration from legacy pinout some of the FMC pins were ommited because
their names were identical to the new pinout, which didn't cause a compilation error.
This fixes LCD examples.
Also update incomplete stm32f769i-disco FMC support to avoid this kind of bug in the future
riscv_internal.h is used literally everywhere, while the SBI definitions
are needed only by whomever needs the services.
Having the SBI definitions:
a) Copied from OpenSBI (why has this been done? even the names are same)
b) Presented publicly to 99% of risc-v modules
creates a build error when building with OpenSBI, due to duplicate
definitions of the SBI service identifiers:
In file included from /nuttx/arch/risc-v/src/common/riscv_internal.h:40,
from /nuttx/arch/risc-v/src/chip/chip.h:32,
from board/mpfs_domain.c:30:
/nuttx/arch/risc-v/src/common/riscv_sbi.h:36: error: "SBI_EXT_BASE" redefined [-Werror]
36 | #define SBI_EXT_BASE 0x00000010
and so forth...
Fix this by removing riscv_sbi.h i.e. not exposing the ABI publicly.
Add heap current used to note.
Plot it in segger sysview data plot.
Signed-off-by: xuxingliang <xuxingliang@xiaomi.com>
Signed-off-by: Neo Xu <neo.xu1990@gmail.com>
1. Kconfig - Removed USART1 config option from STM32_STM32G47XX. Not necessary to adding LPUART functionality. 2. stm32_lowput.c - Added extra check from STM32G4 board because that is the only with LPUART functionality. 2. stm32_serial.c - Removed unneeded function (stm32_serial_get_lpuart). Fixed up_putc return bug. Added configuration for DMAMAP_LPUART RX and TX for STM32G4XXX only. The G4 is the only in this family with LPUART and uses a DMAMUX unlike the others.
1. Removed 1WIRE LPUART refereences in Kconfig and stm32_uart.h. There is no support for LPUART currently in stm32_1wire.c. 2. Removed references to LPUART under DMA_V2 ifdefs. STM32G4 uses DMA_V1, and I saw that none of the chips DMA_V2 (F20, F4) have LPUARTs. AFAIK the only chip in the stm32 folder that has LPUART peripherals is the STM32G4.
Removed unnecessary brackets and empty lines
Added lpuartnsh (LPUART NuttShell) config to the nucleo-g474re board configurations. nsh uses USART3 by default. lpuartnsh uses nsh as a template, changes the serial console to LPUART1, and adds the DMA configs to enable DMA for the LPUART.
Added support for using the lpuart prescaler register. Without prescaling the apbclock, 9600 baud is not supported on the G474RE. By utilizing the prescaler, when necessary, we can support nearly any baud rate (300 baud to 30M Mbaud). lowputc defaults to a prescaler of 16 for the lpuart so standard baud rates (9600 to 115200) are supported early in the boot process. Later in stm32_serial.c the ideal prescaler and BRR values are determined.
Added ifdef statements for LPUART code sections not compatible with other chips.
Changed LPUART BRR calcuation to use 64-bit integers.
Feedback from nuttx pull request. Added brackets around single line if/else statements. Reordered lpuartnsh defconfig file.
Fix lpuart brr calculation after attempting to break the calculation into 2 lines.
Removed TAB
read content of undefinedinsn address, and compare it with what it is in elf to check if there is a ram bit flip
Signed-off-by: liaoao <liaoao@xiaomi.com>
Summary
MPS-521 support Dual Cortex-M33 and maybe suitable for AMP-like
case which is for AUTO OS, the change
1. add support for single core at msp-521 with nsh bringup
2. testing with ostest
TODO:
Dual core support for flat-build
Dual CORE support for Protected Build
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
Summary
1. add Protected build Support for ARM MPS AN500
2. refine mps Memory layout configure and enable MPU support
Note
1. ostest for an547:nsh
2. ostest for an500:nsh and an500:knsh
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
This commit reimplemented the NuttX32 multiboot1 wrapper:
1. Fixed the issue of SMP AP booting.
2. Reduced memory copy overhead. We only need to copy .realmode section
now.
3. Move the multiboot1 header to intel64_head.S.
Signed-off-by: ouyangxiangzhen <ouyangxiangzhen@xiaomi.com>
fix previous problemc
added defconfig for weact-stm32h743:nshusb
board.h
Wrong column position or missing blank line before comment: FIX
hopefully last commit
- Fix `MAKE_PC_FROM_RA` macro to consider the instruction region
base address;
- Add sanity check for calculated PC and SP registers;
- Check if the stack pointer is within the interrupt stack to
enable backtrace dump if an exception occurs during the ISR;
This defconfig is an example of the recorded stack and it became
faulty recently after the implementation of the `up_current_regs`
functions. The `noinstrument_function` directive must be used for
preventing it from being looped when instrumentation is enabled.
Also, this commit places `sched/instrument/stack_record.c` in IRAM.
Since the size of the shadow area will change during the script merging of global variables, it will lead to unpredictable number of links. After fixing, only three links are required.
Signed-off-by: wangmingrong1 <wangmingrong1@xiaomi.com>
LD: nuttx
arm-none-eabi-ld: /home/ligd/platform/mainline/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 40 bytes
make[1]: *** [Makefile:212: nuttx] Error 1
make: *** [tools/Unix.mk:538: nuttx] Error 2
Signed-off-by: ligd <liguiding1@xiaomi.com>
arm-none-eabi-ld: /github/workspace/sources/nuttx/nuttx section `.bss' will not fit in region `ksram'
arm-none-eabi-ld: region `ksram' overflowed by 16 bytes
Signed-off-by: zhangshoukui <zhangshoukui@xiaomi.com>
This interface may be used by application specific logic to start
specified slave cpu core under the pseudo AMP case which is different
with armv7-a/armv8-a SMP. Support for this function is required by
board-level logic if CONFIG_BOARDCTL_START_CPU is selected.
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
After changing sp, following functions calling will result
in unpredictable behavior in case of jumping
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
Revert "Parallelize depend file generation"
This reverts commit d5b6ec450f.
parallel depend ddc does not significantly speed up compilation,
intermediately generated .ddc files can cause problems if compilation is interrupted unexpectedly
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
- Edited linker script for shmem to have condition according to cores selected.
- Added new configuration for nsh_cm7_rptun and nsh_cm4_rptun.
- Appended RPTUN bringup code in stm32_bringup.c
Signed-off-by: Nonpawit Ekburanawat <nonpawit.ek@gmail.com>
add configs with PCI serial console for qemu-intel64 so we can run NuttX on bare
metal Intel HW with serial port card
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
prepare 16550 UART driver to support PCI:
- [breaking change] change argument of uart_ioctl() from `struct file *filep` to `FAR struct u16550_s *priv`
Also fix moxart_16550.c build related to this change
- [breaking change] change argument of uart_getreg() and uart_putreg from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
Also fix arch/x86/src/qemu/qemu_serial.c and arch/x86_64/src/intel64/intel64_serial.c related to this change
- [breaking change] change argument of uart_dmachan() from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
- move `struct u16550_s` to public header
- generalize UART_XXX_OFFSET so we can use it with any register increment
- make u16550_bind(), u16550_interrupt(), u16550_interrupt() public
- remove arch/or1k/src/common/or1k_uart.c and use common 16550 MIMO interfacve
- change irq type in `struct u16550_s` from uint8_t to int to match MSI API
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
move MCR_OUT2 configuration from qemu-intel64/src/qemu_boot.c to common code
also leave this option disabled for qemu-intel64 as it's not required
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Some of PCI drivers require OS interfaces that can't be executed in the INIT context.
In that case we have to postpone PCI drivers probing and call it for example
in board initialization logic.
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
reason:
1 On different architectures, we can utilize more optimized strategies
to implement up_current_regs/up_set_current_regs.
eg. use interrupt registersor percpu registers.
code size
before
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
text data bss dec hex filename
262844 49985 63893 376722 5bf92 nuttx
size change -4
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
enable debug messages for PCI configuration in qemu-intel64
so we know exactly what happen during execution
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Provides two implementations:
- CSR_CYCLE: Cores which implement hardware performance monitoring.
- CSR_TIME: Uses the machine time registers.
Using the up_perf_xx bindings directory is more efficient than performing a nanosecond conversion on every gettime event.
Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
reason:
BOARDIOC_SPINLOCK can support the combined semantics
of disabling interrupts (irq), trylock, and spinlock.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Make this_cpu is arch independent and up_cpu_index do that.
In AMP mode, up_cpu_index() may return the index of the physical core.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Copied spi flash files from risc-v
Removed old spiflash from make.defs
KConfig modifications for common spiflash
Added new spiflash entry to make.defs
S2 Board config update
Modifications working on S2. Need fix on ROM function
Board fixes
Deleted old spiflash files
Fixes for smartfs operation
Set new HAL version
Fixed wrong change on S3
Some domains have a lot of IPv6 addresses. Because of that, it is
not possible to get the IPv4 address with getaddrinfo.
This change separate IPv4 and IPv6 cache size limit to enable to
get both IP addresses.
This commit ensures that RTC data is properly allocated in the RTC
segment in the linker. This fixes the reported problem about using
the legacy bootloader and RTC.
After the number of threads exceeds the array size, it will not be displayed.
Any number of threads can be displayed using dynamic adaptation
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Currently concerns only arm.
tools/ci/testlist/msys2.dat:
At the moment I only added the board nucleo-l152re:nsh
.github/workflows/build.yml:
Enabled cmake for msys2
Prior to this commit, i2c and at24 may be used uninitialized on line
113, 117, 129, and 143 when gd32_at24_wr_test() is called the second
time because these two variables are not static. I don't think making
them static is the correct fix because i2c is released at the end of
this function. Fixed by removing the `if (!initialized)` condition
surrounding the initialization of i2c and at24, making them initialized
at every call to this function.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
After changing sp, following functions calling will result
in unpredictable behavior in case of jumping
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
boards/xtensa/esp32s3/esp32s3-devkit|esp32s3-korvo-2/configs/sdmmc/defconfig: defconfig for sdmmc support
Add description for sdmmc support on esp32s3 in the board specific documentation.
Add defconfig for esp32s3-devkit with external adapter and emmc module.
Add defconfig for esp32s3-korvo-2 with SD slot enabled.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Update internal reference to get the most updated Espressif's
libraries. Those libraries are based on branch `release/v5.1` of
the ESP-IDF and include `v5.1.4` version of it.
1. increase CDCECM_MXDESCLEN to avoid memory overrun when sending
configuration description(mkcfmdesc) information
2. correct the request structure used in the notify phase
3. disable unused configuration options
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver
Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
This reverts both 2afdcfb6a6 and 0a0af89de9 to restore the 128K kflash
design as the implementation depends on that to work, checked with:
```
$ qemu-system-arm -M lm3s6965evb -nographic -device \
loader,file=nuttx.bin,addr=0x0 -device \
loader,file=nuttx_user.bin,addr=0x2000
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This renames a few RV32 configs to follow the convention that names w/o
numbers are for RV32, so that to be in line with majority RV32 configs.
As a result, we have: `nsh` vs `nsh64`, `knsh` vs `knsh64`, `pnsh`
vs `pnsh64`,`flats` vs `flats64`, `nsbi` vs `nsbi64`, `libcxx` vs
`libcxx64` etc. This helps us pick the right config name w/o checking
file contents.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adjusts memory.ld to unblock CI issue: `nuttx_user.elf
section '.text' will not fit in region 'uflash'`
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Most developers start learning Nuttx from sim/nsh, but the login experience is very bad,
they don't know where to get the username and password, this commit will remove the
limitation of sim/nsh login, and add sim/login configuration to ensure the feature of
NSH_CONSOLE_LOGIN is verified.
Signed-off-by: chao an <anchao@lixiang.com>
- New defconfig for nsh CM4 and CM7
- New linker script for cm4
- Update linker script to include shared memory and condition for flash size
- Update Make and CMake file to compile according to core
- Added UART7 pin by default for CM4 serial output
- Changed userled configuration to fix error
Signed-off-by: Nonpawit Ekburanawat <nonpawit.ek@gmail.com>
This PR adds a new Build Config `rv-virt:leds64_rust` that builds the Rust App `leds_rust` for QEMU RISC-V 64-bit. The build requires the [Rust Target `riscv64gc-unknown-none-elf`](https://github.com/apache/nuttx/pull/12858):
```bash
rustup target add riscv64gc-unknown-none-elf
```
New Files:
`boards/risc-v/qemu-rv/rv-virt/configs/leds64_rust/defconfig`: Add new Build Config `rv-virt:leds64_rust`
Updated Docs:
`applications/examples/leds_rust/index.rst`: Add `leds_rust` example app
`platforms/risc-v/qemu-rv/boards/rv-virt/index.rst`: Add `rv-virt:leds64_rust` config
This revises PROTECTED build for qemu-rv mainly to avoid hard-coded
addresses in linker scripts. It also added rv32 support, cleaned up
config `pnsh64` and added config `pnsh`.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds NuttSBI support for rv-virt device so that to enable CI
checks for NuttSBI later. It allows using `-bios nuttx` option to
run NuttX with QEMU v6.2 w/o OpenSBI.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
HPET can be used as system clock for x86_64
to set HPET as system clock you have to enable:
CONFIG_ONESHOT=y
CONFIG_ALARM_ARCH=y
CONFIG_INTEL64_ONESHOT=y
CONFIG_ARCH_INTEL64_HPET_ALARM=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The ESP32-S3-Korvo-2 is a multimedia development board based on the
ESP32-S3 chip. It is equipped with a two-microphone array which is
suitable for voice recognition and near/far-field voice wake-up
applications. The board integrates multiple peripherals such as
LCD, camera, and microSD card. It also supports JPEG video stream
processing. With all of its outstanding features, the board is an
ideal choice for the development of low-cost and low-power
network-connected audio and video products.
Provide `up_copy_section` function that enables copying data using
the data bus. If the memory destination address is accessible
through the instruction bus, the data is copied using the
correspondent address accessible through the data bus.
The buffer initialization function (`i2s_buf_initialize`) calls
`i2s_buf_free`, which performs buffer initialization within a
critical section (`spin_lock_irqsave`). If this function is called
under the same critical section (same spinlock), initialization
will hang.
This change implements a driver for the two watchdog timers on the BL808, and enables it as part of the timer config. The driver is based on the GP timer driver.
arch/xtensa: add support for capture driver on ESP32 and ESP32|S3|
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Review fixes
arch/xtensa: add support for fault signal on motor control
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Got responsive fault indicator
Working brakes - still need to work on starting isr
Fixed single-time ISR initializiation
Working soft brake on fault
Improved KConfig for BDC and BLDC
Kconfig fixed at board level
nucleo-f4229zi board does not come with external ram.
Looking at netnsh config, these changes are also not present.
Issue found when registering i2c char driver for i2ctool. zalloc
returned -ENOMEM
This revises FLAT build ld.script so that to use CONFIG_RAM_START
instead of hard coded address to increase flexibility.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This allows virtio devices to be probed upon board_early_init, thus
making virito-serial ready earlier for console use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
- This PR adds the LED Driver for QEMU RISC-V 32-bit and 64-bit (User LEDs and Auto LEDs)
- QEMU RISC-V LED Driver will be used by the Rust Blinky App for Google Summer of Code
- Blinking the LED is probably the most common Embedded Demo, and now it's supported by QEMU RISC-V
- We added NuttX Configs `rv-virt:leds` and `rv-virt:leds64` to support User LEDs for 32-bit and 64-bit RISC-V
- Turning on/off a Simulated User LED will print a log message: "LED 1 set to 1"
- The code is derived from NuttX PinePhone LED Driver
This driver implements `read`, `write`, `open`, `close` and `ioctl`
interfaces to the SHT4X temperature and humidity sensor on an I2C bus.
The read implementation is that of a character driver for easy
debugging, while `ioctl` provides an interface to the sensor's raw data
collection and heating functionality.
This adjusts canmv230 `master` and `remote` configs to support both
k230 and k230d devices and drop unused items.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Fix https://github.com/apache/nuttx/issues/12712
If run nsh over usb based serial port, the default stack size is too small,
for example simple `ps` command will use more than 2208 bytes stack.
Then the stack overflow will happen and the system will hang here.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
